• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.125-132
• /
• 2014

강섬유는 콘크리트 부재의 인장영역에 효과적으로 작용하여 균열저항성을 높여주고 역학적 성능을 개선하는 것으로 알려져 있다. 본 연구는 팽창재를 사용한 강섬유 모르타르에 화학적 프리스트레싱을 인가하여 균열저항성 및 역학적 성능을 평가하는 연구이다. 이를 위해 시멘트 바인더의 10%를 치환한 CSA 팽장채가 사용되었으며 체적비 1%의 강섬유를 고려한 시멘트 모르타르 배합이 준비되었다. 기본적인 역학적인 성능평가 외에 노치를 가진 보를 제조하여 초기균열하중 및 파괴에너지를 평가하였다. 실험결과 강섬유와 CSA 팽창재를 혼입한 모르타르에서는 보통 강섬유 모르타르에 비하여 평균 1.75배의 균열저항성 하중이 증가하였으며, 파괴에너지 역시 1.41~1.53배 증가하였다. 최적의 강섬유 체적비와 팽창재의 혼입이 고려된다면 강섬유의 내부 화학적 프리스트레싱을 가진 복합재는 다양한 부재에 사용될 수 있으며, 외부하중에 효과적인 균열저감 기법으로 사용할 수 있다.

• 대한토목학회논문집
• /
• 제32권1A호
• /
• pp.55-64
• /
• 2012

이 연구에서는 강섬유 보강 초고성능 콘크리트 보의 전단거동를 파악하기 위한 실험연구를 수행하였다. I-형 단면을 갖는 단순지지 6개의 보 부재에 대해 3점하중 정적재하실험을 수행하여 전단 거동 특성을 분석하였다. 부재의 실험변수는 강섬유 혼입량과 전단지간-유효깊이 비이다. 강섬유 혼입량은 1.0, 1.5 및 2.0%로 변화하였고, 전단지간-유효깊이 비는 2.5 및 3.4로 변화하였다. 실험결과는 강섬유량이 증가할수록 극한전단강도가 증가하고, 전단지간-유효깊이 비가 증가할수록 극한전단강도가 감소하는 것을 나타낸다. 실험결과를 이용하여 기존 강섬유 보강 콘크리트 보의 전단강도 예측식의 적합성을 평가하고자 하였다. 전단강도 실험값을 기존의 제안식에 의한 전단강도 예측값과 비교하였으며, 비교결과는 예측식의 유효성을 나타내고 있다. AFGC와 JSCE의 제안식에 의한 전단강도 예측 평균값이 실험값에 거의 근접하고 있으며, 예측식 중에서 이들 제안식의 정확도가 가장 높은 것으로 나타난다.

• Structural Engineering and Mechanics
• /
• 제67권4호
• /
• pp.347-358
• /
• 2018

The main aim of this research was to investigate the shear strength of non-prismatic steel fiber reinforced concrete beams under monotonic loading considering different parameters. Experimental program included tests on fifteen non-prismatic reinforced concrete beams divided into three groups. For the first and the second groups, different parameters were taken into consideration which are: steel fibers content, shear span to minimum depth ratio ($a/d_{min}$) and tapering angle (${\alpha}$). The third group was designed mainly to optimize the geometry of the non-prismatic concrete beams with the same concrete volume while the steel fiber ratio and the shear span were left constant in this group. The presence of steel fibers in concrete led to an increase in the load-carrying capacity in a range of 10.25%-103%. Also, the energy absorption capacity was increased due to the addition of steel fibers in a range of 18.17%-993.18% and the failure mode was changed from brittle to ductile. Tapering angle had a clear effect on the shear strength of test specimens. The increase in tapering angle from ($7^{\circ}$) to ($12^{\circ}$) caused an increase in the ultimate shear capacity for the test specimens. The maximum increase in ultimate load was 45.49%. The addition of steel fibers had a significant impact on the post-cracking behavior of the test specimens. Empirical equation for shear strength prediction at cracking limit state was proposed. The predicted cracking shear strength was in good agreement with the experimental findings.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.644-647
• /
• 2004

Modulus of rupture (MOR) and flexural toughness in hybrid fiber reinforced cement pastes mixed with micro-fiber (carbon fiber) and macro-fiber (steel fiber) and replaced with silica fume according to the fixed ratio were researched. Reinforcing efficiency in specimens were estimated by two factors, such as strengthening factor $(F_s)$ and toughening factor $(F_t)$, which were calculated from the analysis of variance (ANOVA) of the response values, such as MOR and absorbtion energy $(W_0)$. According to the experimental design by the fractional orthogonal array, nine hybrid fibrous reinforced paste series and one non-reinforced control paste were manufactured. Specimens of each series were tested by the INSTRON Inc. 8502(model) equipment in three-points bending and then measured the load-deflection response relationships. Considerable strengthening of cement pastes resulted in' the case of other factors without carbon fiber and toughening of cement pastes about all factors showed high. Based on the significance of factors related to response values from ANOVA, following assessments were available; $F_s$ or MOR: silica fume $\gg$ steel fiber $\gg$ carbon fiber; $F_t\;or\;W_0$: steel fiber > carbon fiber > silica fume. Optimized composition condition was estimated by steel fiber of $1.5\%$, carbon fiber of $0.5\%$ and silica fume $7.5\%$ in side of strengthening and steel fiber of $1.5\%$, carbon fiber of $0.75\%$ and silica fume $7.5\%$ in side of toughening.

• Computers and Concrete
• /
• 제31권3호
• /
• pp.197-206
• /
• 2023

In this paper, the bending performance of a MSFRHPC (containing steel fiber, polyvinyl alcohol (PVA) fiber, and CW)-reinforced beam was studied for the first time. Introducing a multiscale fiber system increased the first crack load (up to 150%), yield load (up to 50%), and peak load (up to 15%) of reinforced beams. The multiscale fiber system delays cracking of the reinforced beam, reduces crack width of the reinforced beam in normal use, and improves the durability of the beam. Considering yield load and peak load, the reinforcing effect of multiscale fiber on the high-reinforcement ratio beam (1.00%) is better than that on the low-reinforcement ratio beam (0.57%). Introducing fibers slowed the development of cracks in the reinforced beam under bending. With the added hybrid fiber, the deformation concentration of reinforced beams after yield was more significant with concentration in 1 or 2 cracks. A model for predicting the flexural capacity of MSFRHPC-reinforced beams was proposed, considering the action of multiscale hybrid fibers. This research is helpful for structure application of MSFRHPC-containing CW.

• Advances in concrete construction
• /
• 제12권6호
• /
• pp.451-459
• /
• 2021

The mechanical behaviors and chloride resistance performance of fiber reinforced cementitious composites (FRCC) with hybrid polyethylene (PE) and steel fiber (in total 2% by volume) were investigated. Based on micro-mechanics and fracture mechanics, the reason why the tensile strain capacity of FRCC changed obviously was obtained. Besides, the effects of the total surface area of fiber in FRCC on compressive strength and chloride content were clarified. It is found that the improvement of the tensile strain capacity of FRCC with hybrid fiber is attributed to the growth of strain-hardening performance index (the ratio of complementary energy to crack tip toughness). As the total surface area of fiber related with the interfacial transition zone (ITZ) between fiber and matrix increases, compressive strength decreases obviously. Since the total surface area of fiber is small, the chloride resistance performance of FRCC with hybrid PE and steel fiber is better than that of FRCC containing only PE fiber.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.98-105
• /
• 2017

본 연구에서는 후크형 강섬유와 PVA 섬유의 혼합비에 따른 하이브리드 섬유보강 시멘트 복합체의 인장거동에 미치는 변형속도의 효과에 대하여 평가하기 위하여, 후크형 강섬유와 PVA 섬유를 각각 1.5+0.5, 1.0+1.0, 0.5+1.0vol.%의 혼합비로 보강한 하이브리드 섬유보강 시멘트 복합체를 제작하였다. 그 결과, 후크형 강섬유보강 시멘트 복합체는 변형속도가 증가함에 따라 섬유와 매트릭스의 부착력이 향상되어 인장강도, 변형능력 및 파괴인성이 크게 향상되었으며, 후크형 강섬유 주변의 매트릭스에 발생하는 마이크로 균열에 의해 직선형으로 인발되는 섬유의 수가 감소하고, 인장강도 점 이후의 응력 저하가 급격하게 발생하였다. 한편, PVA 섬유는 변형속도 $10^{-6}/s$에서는 끊어지는 파괴거동이 나타났으나, 변형속도 $10^1/s$에서는 변형속도가 증가함에 따라 섬유가 인발되는 파괴거동에 의해 다중균열 개수 및 변형능력이 감소하였다. 후크형 강섬유 1.5vol.%, PVA 섬유 0.5vol.%를 혼입한 시험체(HSF1.5PVA0.5)는 PVA가 후크형 강섬유의 주변 매트릭스에 발생하는 마이크로 균열을 억제하여 후크형 강섬유의 인발저항성능을 향상시키기 때문에 가장 높은 인장강도를 나타내었으며, 변형능력 및 파괴인성의 DIF가 크게 향상되었다. 또한, 변형속도 $10^1/s$에서는 후크형 강섬유의 인발저항성능의 증가로 인하여 직선형으로 인발되는 섬유의 수가 증가하기 때문에 인장강도 점 이후의 응력 저하가 감소하여 파괴인성의 시너지는 양의 값을 나타내었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 봄 학술발표회 논문집
• /
• pp.51-56
• /
• 1990

Investigations on the behavior of steel fiber reinforced high strength concrete beams subjected to predominant shear are accomplished to determine their diagonal shear strength including ultimate shear strength. The parameters varied were the volume fraction(Vf) of the fibers, shear span depth ratio(a/d). The test result show that diagonal shear strength and ultimate shear strength are increased siginificantly due to crack arrest mechanism. Predictive equations are suggested for evaluating the diagonal cracking strength and ultimate shear strength of the fiber reinforced high strength concrete beams.

• 한국농공학회지
• /
• 제17권4호
• /
• pp.3921-3930
• /
• 1975

This research was carried out to investigate several mechanical characteristics of pre-stressed steel beams. The configuration of specimens used for this study were as follows; a cover plate having permissible fiber stress of 4,000 kg/$\textrm{cm}^2$ was welded at bottom having the allowable bending stress 2500 kg/$\textrm{cm}^2$ steel beam, the section ratios of pre-stressed steel beam and cover plate were 0.5 and 0.6. Adopted pre-stresses were 0%, 50%, and 100% of an allowable fiber stress of a steel beam. The results obtained from the study may be summarized as follows; 1. The elastic range of a beam was increased by the application of pre-stress to the beam, which leads to a lighter section. 2. The permissible moment capacity of a pre-stressed steel beam was greated than that of a steel beam without pre-stressing. 3. The equivalent allowable stress induced by adopting the different section ratio of pre-stressed beam to cover plate were figured out 4. The optimum value of section ratio of beam and cover plate was 0.3 to 0.4 in case of a 1.5m span composite beam, a combination of an allowable stress 2,500kg/$\textrm{cm}^2$ steel beam and a permissible fiber stress 4,000 kg/$\textrm{cm}^2$ steel cover plate, was used. 5. The magnitude of the pre-stress was desirable to be same as the allowable stress of a steel beam. 6. It was concluded that if the construction techniques in the field are developed and improved, the practicing of pre-stress to the steel structure has a promising future.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.437-438
• /
• 2010

본 연구에서는 하이브리드 강섬유를 사용한 초고성능 콘크리트의 휨거동특성에 미치는 효과를 평가 하였다. 하이브리드 섬유 사용 UHPC의 휨거동을 평가한 결과, 하이브리드 강섬유를 체적비로 2% 혼입 시 단독으로 강섬유를 사용하는 경우에 비해 휨강도가 약 27%(최대 50%)이상 향상되었고, 1.5% 혼입 시 현행 UHPC의 휨강도를 상회하고 있는 것으로 나타났다.