• Carbon letters
• /
• v.8 no.1
• /
• pp.25-29
• /
• 2007

The carbon brake discs were manufactured by densification the carbon fiber preform using PG-CVI technology with Propene as a carbon precursor gas and Nitrogen as a carrier gas. The densities of carbon brake discs were tested at different densification time. The results indicate that the densification rate is more rapid before 100 hrs than after 200 hrs. The CTscanning image and the SEM technology were used to observe the inner subtle structure. CT-images show the density distribution in the carbon brake disc clearly. The carbon brake disk made by PG-CVI is not very uniform. There is a density gradient in the bulk. The high-density part in the carbon brake is really located in the friction surface, especially in the part of inner circle. This density distribution is most suitable for the stator disc.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.300-302
• /
• 1997

Synchronous Reluctance Motors(SynRM) with multiple flux barrier structures are considered in this paper. Since the stator of a SynRM is similar as that of an inductin motor, attention is focused here on the rotor structure. We have designed the parameter of SynRM and analyzed the characteristics of the electromagnetic energy conversion.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.3
• /
• pp.312-319
• /
• 2012

The operation principle of an axial flux-switching hybrid excitation synchronous machine (AFHESM) is analyzed and its topology structures are proposed in this paper. After some comprehensive analysis of the operation principle to axial flux electrical machine, flux-switching electrical machine and hybrid excitation electrical machine, the operation principle of AFHESM is given. Combined with some typical topological structures of hybrid excitation electrical machine, some possible topological structures are proposed and some comprehensive comparisons are carried out. The analysis results show that the stator-separated AFHESM has some advantages such as less AM turns, less impact on the demagnetization of PM, less magnetic flux-leakage and higher efficiency compared to other topologies.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.32-39
• /
• 2014

Traveling wave generation in a ring type stator has been studied. The basic working principle to create traveling wave has been modelled by the superposition of two orthogonal standing waves. Theoretical analysis shows that the length to radius ratio affects the frequency gap between two pseudo orthogonal modes used to create traveling wave. FEM simulation is then discussed and applied to validate the analytical model. At last, a possible optimal solution is reported with FEM verification.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.900-902
• /
• 2000

A moving-coil-type linear oscillatory actuator is consisted of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure and an iron core as a pathway for magnetic flux. The inductance of moving coil and the push/pull effect is obtained from the permeance model of LOA with the open magnetic circuit. The analytical method are verified using the 2D finite element method.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.20-22
• /
• 2005

In this paper, we propose fuzzy-neural network controller that combines a fuzzy control and the Neural Networks for high performance control of induction motor drive, Also, this paper is proposed control of maximum torque per ampere of induction motor. This strategy is proposed which is simple in structure and has the honest goal of minimizing the stator current magnitude for given load torque. The performance of the proposed induction motor drive with maximum torque control using fuzzy-neural network controller is verified by simulation at dynamic operation conditions.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.15-17
• /
• 1999

A voice-coil-type LOA consists of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure. We have to obtain the back-EMF constant ${\kappa}_E$ from 3D FEA and experiments, precisely. The ${\kappa}_E$ and other parameters provide the transfer function, through which is derived the frequency response characteristics. Inverter-fed LOA is examined aiming to compare with results of simulation.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.278-280
• /
• 1998

A voice-coil-type LOA consists of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure, and an iron core as a pathway for magnetic flux. When applying a voice-coil-type LOA to the control system, we have to obtain the control parameters and circuit parameters, such as mass, coil inductance, coil resistance, thrust voltage & stroke, frequency & stroke and so on. Therefore, these parameter were determined from the analytical and experimental method.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.653-655
• /
• 2000

A moving-coil-type linear oscillatory actuator(LOA) consists of the NdFeB permanent magnets with high specific energy as the stator. a coil-wrapped nonmagnetic hollow rectangular structure. LOA system have the push/pull effect caused by the unbalanced magnetic field. In order to eliminate the unbalanced thrust, we propose the control algorithm and construct the LOA driver. As a results, we obtain the balanced oscillating thrust.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.67-69
• /
• 1998

In order to design or predict the performance of a cylindrical electrostatic motor it is necessary to analyze the torque generated by such a structure. In this paper a simple but sufficiently accurate analytical model is developed for use in design. Conformal mapping are used to model the capacitance and torque of the motor as a function of the rotor position, using a quasi-static, two-dimension approximation, the effect of an insulating dielectric layer on the stator or rotor is also evaluated.