• Journal of Astronomy and Space Sciences
• /
• v.28 no.2
• /
• pp.123-132
• /
• 2011

It is generally believed that the occurrence of a magnetic storm depends upon the solar wind conditions, particularly the southward interplanetary magnetic field (IMF) component. To understand the relationship between solar wind parameters and magnetic storms, variations in magnetic field polarity and solar wind parameters during magnetic storms are examined. A total of 156 storms during the period of 1997~2003 are used. According to the interplanetary driver, magnetic storms are divided into three types, which are coronal mass ejection (CME)-driven storms, co-rotating interaction region (CIR)-driven storms, and complicated type storms. Complicated types were not included in this study. For this purpose, the manner in which the direction change of IMF $B_y$ and $B_z$ components (in geocentric solar magnetospheric coordinate system coordinate) during the main phase is related with the development of the storm is examined. The time-integrated solar wind parameters are compared with the time-integrated disturbance storm time (Dst) index during the main phase of each magnetic storm. The time lag with the storm size is also investigated. Some results are worth noting: CME-driven storms, under steady conditions of $B_z$ < 0, represent more than half of the storms in number. That is, it is found that the average number of storms for negative sign of IMF $B_z$ (T1~T4) is high, at 56.4%, 53.0%, and 63.7% in each storm category, respectively. However, for the CIR-driven storms, the percentage of moderate storms is only 29.2%, while the number of intense storms is more than half (60.0%) under the $B_z$ < 0 condition. It is found that the correlation is highest between the time-integrated IMF $B_z$ and the time-integrated Dst index for the CME-driven storms. On the other hand, for the CIR-driven storms, a high correlation is found, with the correlation coefficient being 0.93, between time-integrated Dst index and time-integrated solar wind speed, while a low correlation, 0.51, is found between timeintegrated $B_z$ and time-integrated Dst index. The relationship between storm size and time lag in terms of hours from $B_z$ minimum to Dst minimum values is investigated. For the CME-driven storms, time lag of 26% of moderate storms is one hour, whereas time lag of 33% of moderate storms is two hours for the CIR-driven storms. The average values of solar wind parameters for the CME and CIR-driven storms are also examined. The average values of ${\mid}Dst_{min}{\mid}$ and ${\mid}B_{zmin}{\mid}$ for the CME-driven storms are higher than those of CIR-driven storms, while the average value of temperature is lower.

• Atmosphere
• /
• v.20 no.1
• /
• pp.37-47
• /
• 2010

The methods measuring the precipitation drop size distribution(hereafter referred to as DSD) at Cloud Physics Observation System (CPOS) in Daegwallyeong are to use PARSIVEL (PARticle SIze and VELocity) disdrometer (hereafter referred to as PARSIVEL) and Micro Rain Radar (hereafter referred to as MRR). First of all, PARSIVEL and MRR give good correlation coefficients between their rain rates and those of rain gage: $R^2=0.93$ and 0.91, respectively. For the DSD, the rain rates are classified in 3 categories (Category 1: rr (Rain Rate) ${\leq}0.5\;mm\;h^{-1}$, Category 2: $0.5\;mm\;h^-1$ < rr < $4.0\;mm\;h^{-1}$, Category 3: rr ${\geq}4\;mm\;h^{-1}$). The shapes of PARSIVEL and MRR DSD are relatively most similar in category 2. In addition, we retrieve the vertical rain rate and liquid water content from MRR under melting layer, calculated by Cha et al's method, in Daegwallyeong ($37^{\circ}41{\prime}N$, $128^{\circ}45^{\prime}E$, 843 m ASL, mountain area) and Haenam ($34^{\circ}33^{\prime}N$, $126^{\circ}34^{\prime}E$, 4.6 m ASL, coast area). The vertical variations of rain rate and liquid water content in Daegwallyeong are smaller than those in Haenam. We think that this different vertical rain rate characteristic for both sites is due to the vertical different cloud type (convective and stratiform cloud seem dominant at Haenam and Daegwallyeong, respectively). This suggests that the statistical precipitation DSD model, for the application of weather radar and numerical simulation of precipitation processes, be considered differently for the region, which will be performed in near future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.9
• /
• pp.1254-1262
• /
• 2014

Lymphoid enhancer binding factor 1 (LEF-1) is a member of the T-cell specific factor (TCF) family, which plays a key role in the development of breast endothelial cells. Moreover, LEF-1 gene has been identified as a candidate gene for teat number trait. In the present study, we detected two novel mutations (NC_010450.3:g. 99514A>G, 119846C>T) by DNA sequencing and polymerase chain reaction-restriction fragment length polymorphism in exon 4 and intron 9 of LEF-1 in Guanzhong Black, Hanjiang Black, Bamei and Large White pigs. Furthermore, we analyzed the association between the genetic variations with teat number trait in these breeds. The 99514A>G mutation showed an extremely significant statistical relevance between different genotypes and teat number trait in Guanzhong (p<0.001) and Large White (p = 0.002), and significant relevance in Hanjiang (p = 0.017); the 119846C>T mutation suggested significant association in Guanzhong Black pigs (p = 0.042) and Large White pigs (p = 0.003). The individuals with "AG" or "GG" genotype displayed more teat numbers than those with "AA"; the individuals with "TC" or "CC" genotype showed more teat numbers than those with "TT". Our findings suggested that the 99514A>G and 119846C>T mutations of LEF-1 affected porcine teat number trait and could be used in breeding strategies to accelerate porcine teat number trait improvement of indigenous pigs breeds through molecular marker assisted selection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.1-6
• /
• 2017

Stents are widely used as the most common method of treating coronary artery disease with implants in the form of a metal mesh. The blood flow is normalized by inserting a stent into the narrowed or clogged areas of the human body. In this study, the mechanical characteristics of a stent are investigated according to the variations of its design parameters by the Taguchi method and finite element analysis. A stent model of the Palmaz-Schatz type was used for the analysis. In the analysis, an elasto-plastic material model was adopted for the stent and a hyper-elastic model was used for the balloon. The main interest of this study is to investigate the effects of the design parameters which reduce the possibility of restenosis by adjusting the recoil amount. A Taguchi orthogonal array was constructed on the model of the stent. The thickness and length and angle of the slot were selected as the design parameters. The amounts of radial recoil and longitudinal recoil were calculated by finite element analysis. The statistical analysis using the Taguchi method showed that optimizing the shape of the stent could reduce the possibility of restenosis. The optimized shape showed improvements of recoil in the radial and longitudinal directions of ~1% and ~0.1%, respectively, compared to the default model.

• Journal of Pharmacopuncture
• /
• v.11 no.1
• /
• pp.21-29
• /
• 2008

Objectives : To investigate the therapeutic effects of SBVP in the treatment of patients with cancer-related pain. Design : A prospective randomized, double-blind, placebo-controlled study of SBVP. Setting : The study was conducted at the East West Cancer Center of Daejeon University Dunsan Oriental Hospital from March 1, 2007 to June 20, 2007. Patients : 11 patients diagnosed with cancer-related pain of over 3rd degree on the Numeric Rating Scale(NRS)(0, no pain at all, 10, worst pain imaginable) were entered into a double-blind, placebo-controlled trial of SBVP. They were randomized into Groups A and B(SBVP and control group, respectively) using the table of random sampling numbers and never informed of their affiliation by the coordinator. 5 of 6 patients in Group A and 4 of 5 patients in Group B completed the clinical trial. Intervention : SBVP(1ml/day) for group A and Normal Saline Placebo(1ml/day) for group B was injected into the abdomen acupoint, Zhong Wan(CV 12). The treatment was administered daily for five days. Outcome Measures : Degree of cancer-related pain was measured using the Numeric Rating Scale(NRS) before and after each treatment for "Pain right now" and "Average pain in last 24 hours". Statistical Analysis : Analysis regarding variations in NRS was carried out by applying t-tests(independent sample t-test and paired sample t-test) and Wilcoxon signed rank test with level of significance at 5%. Results : Differences in NRS of "Pain right now" for the two groups were statistically significant. The mean improvement point of SBVP was significantly higher than the control group($2.48^{\circ}{\pm}1.52$ vs $0.97^{\circ}{\pm}1.88$, p<0.05). Differences in average pain score before and after treatment in SBVP group were also significant($5.13^{\circ}{\pm}1.77$ vs $2.65^{\circ}{\pm}0.67$, p<0.05) compared with control group. The two groups showed no significant differences for long term effects in "Average pain in last 24 hours." Conclusion : Although further study will be needed on the large scale, SBVP shows potential as an effective treatment for immediate relief of cancer-related pain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.493-500
• /
• 2017

Based on the data accumulated through EMU fault management, this paper examines the reliability of old railway car parts and proposes measurements to improve safety. Subway Line 7 of the Seoul Metropolitan Rapid Transit Corporation, auxiliary power unit (Static Inverter) of the EMU second version is a core equipment to supply power to various room-service units in cars and make an effect directly on passenger satisfaction. To analyze the pattern of failure throughout the field data over a long period of time, this analysis of statistics and reliability considers the operating environment and stress factors. This statistical analysis presents the correlation between failure and the temperature stress factors related to frequent failure occurring intensively in summer. In addition, throughout the analysis of the life of the IGBT inverter, the effect of the temperature stress factor was observed before and after the repair. As a result of an analysis of the optimal operating conditions considering two variations of EMU, such as variable load and outside temperature, a difference in the cooling capacity between the optimal operating conditions and frequent failure conditions was observed. Based on this analysis, this paper suggests a way to minimize cooling capacity difference for the optimal operational conditions.

• The Korean Journal of Zoology
• /
• v.32 no.3
• /
• pp.242-251
• /
• 1989

Morphometric and genetic analyses on six populations of the two subspecies of Cobitis koreensis were performed to investigate the geographic variation and to clarify their taxonomic status. No significant differences between subspecies were found. Puan population of C. k. pumilus tends to be smaller in numbers of cross bars and dorsal spots, than those of C. k. koreensis populations with no statistical significance. Average degree of genic variation among six populations of the two subspecies was A=1.5, P =37.3%, HD=0.053, and HG=0.097. Marginal populations of Samchog (C. k. koreensis) and Puan(C. k. pumilus) were least variable: A= 1.3, P=23.8%, HD=0.0l0, HG=0.043, and A= 1.2, P=19.0%, HD=0.029, HG=0.078 respectively.The difference between HD and HG in all populations may indicate a patchness distribution between demes within each population. Genetic similarities between the two subspecies were, on the average, S=0.894, and this value correspond to the average genetic similarities among five populations of C. k. koreensis (5=0.899). Chongup population of C. k. koreensis and Puan population of C. k. pumilus was most similar genetically (5 =0.931). The results of morphometric and genetic analysis in this study indicate that C. k. pumilus is not a valid subspecies and should be considered as a population of C. koreensis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.21
• /
• pp.9177-9183
• /
• 2014

Polymorphisms of inflammation-related genes have been found to be associated with non-Hodgkin lymphoma (NHL) or some of its subtypes, but only a few relevant data have been reported in China. In this study, the Snapshot method was used to assess genetic variation; a total of 14 single nucleotide polymorphisms (SNPs) for 6 inflammatory factors in 157 NHL cases (64 Uygur ethnic subjects, 93 Han Chinese) and 435 controls (231 Uygur and 204 Han Chinese) were studied from the Xinjiang province of China. Haplotype distribution was estimated using PHASE 2.3 software. Statistical differences in the genotype and haplotype frequencies between case and control groups were also considered and estimated. For the Han population, the geneotype distributions for TNF-${\alpha}rs1800629$, TNF-${\alpha}rs1800630$, IL-6 rs1800795, IL-6 rs1800797, NF-KB1 rs1585215 and TLR-4 rs4986790 showed significant differences between the case and control groups (p<0.05). The TNF-${\alpha}$ gene frequencies of ACG and CCA haplotypes in the cases were higher than in the controls (OR=2.45, 95% CI: 1.55-3.89, p=0.0002, OR=2.53, 95% CI: 1.10-5.80, p=0.029, respectively), and the same findings were detected for TNF-${\beta}$ gene CA haplotype (OR=1.87, 95% CI: 1.21-2.90, p=0.0054). However, for the Uygur population, no such significant differences were detected within the gene-type distribution of the 14 SNPs. The TNF-${\alpha}$ gene frequency of the CCA haplotype between the two groups (OR=1.98, 95% CI: 1.11-3.51, p=0.021) revealed a statistically significant difference. Our results showed that polymorphic variations of inflammation-related genes could be important to the NHL etiology of the Han population, and that these may only have limited influence on the Uygur population.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.3
• /
• pp.24-33
• /
• 2001

this paper describes a baseline for an implementation of a corpus-based Korean TTS system. The conventional TTS systems using small-sized speech still generate machine-like synthetic speech. To overcome this problem we introduce the corpus-based TTS system which enables to generate natural synthetic speech without prosodic modifications. The corpus should be composed of a natural prosody of source speech and multiple instances of synthesis units. To make a phone level synthesis unit, we train a speech recognizer with the target speech, and then perform an automatic phoneme segmentation. We also detect the fine pitch period using Laryngo graph signals, which is used for prosodic feature extraction. For break strength allocation, 4 levels of break indices are decided as pause length and also attached to phones to reflect prosodic variations in phrase boundaries. To predict the break strength on texts, we utilize the statistical information of POS (Part-of-Speech) sequences. The best triphone sequences are selected by Viterbi search considering the minimization of accumulative Euclidean distance of concatenating distortion. To get high quality synthesis speech applicable to commercial purpose, we introduce a domain specific database. By adding domain specific database to general domain database, we can greatly improve the quality of synthetic speech on specific domain. From the subjective evaluation, the new Korean corpus-based TTS system shows better naturalness than the conventional demisyllable-based one.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.300-300
• /
• 2017

'Saemimyeon' a Tongil-type rice variety (Indica ${\times}$ Japonica), which contains high amylose contents is suitable for rice noodle production. Nowadays, the major parts of rice processing industry that includes products like rice flour and noodles are expected to partially replace wheat flour market. The volume of rice noodle market is getting bigger and can contribute to the rice surplus and farmer's income. This study was carried out to promote productivity and flour-making quality of 'Saemimyeon' by finding the most suitable transplanting and harvesting times. The transplanting days used were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$ and June $14^{th}$ and the planting distance used was 30 x 12cm. In addition, harvesting time was determined by days after heading time (40, 45, 50, 55 and 60 days). The field experiment was conducted at the experimental field in Miryang (Southern plain area of Korea) from 2015 to 2016. Our results suggest that the optimum transplanting days were from May $24^{th}$ to May $31^{th}$ which resulted to an average yield of 748~751kg/10a. Interestingly, yield was sharply decreased below 700kg/10a before May $10^{th}$ and after June $7^{th}$. The average grain filling rate before May $31^{th}$ was more than 83% but it declined to 75% after June $7^{th}$. The average temperature ranges from heading time to harvesting time was $ 21\sim25^{\circ}C$ and the estimated optimal temperature was $23.4^{\circ}C$ which is similar to May $24^{th}$ by regression equation. We found that the optimal harvest time was 45~50 days after heading time. It is hypothesized that low temperature at seed maturation time caused the lower grain filling rate therefore 'Saemimyeon' need to be transplanted before May $31^{th}$ for higher productivity. We found no statistical variation in amylose contents among experimental plots (28.2~30.4%). We conclude that the productivity of 'Saemimyeon' highly depends on temperature that is critical for grain filling stage controlled by transplanting time.