• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1419-1424
• /
• 2005

This paper suggests a new cipher mode of operation which can recover cryptographic synchronization. First, we study the typical cipher modes of operation, especially focused on cryptographic synchronization problems. Then, we suggest a statistical cipher-feedback mode of operation. We define the error sources mathmatically and simulate propagation errors caused by a bit insertion or bit deletion. In the simulation, we compare the effects of changing the synchronization pattern length and feedback key length. After that, we analyze the simulation results with the calculated propagation errors. finally. we evaluate the performance of the statistical cipher-feedback mode of operation and recommand the implementation considerations.

• Journal of Environmental Science International
• /
• v.11 no.1
• /
• pp.63-68
• /
• 2002

In this study, we examined statistical analysis between sewage plant operations parameters and effluent quality We got six components from principle component analysis of the operation parameters and secondary effluent quality. 91.8% of the total variance was explained by the six components. The components were identified in the following order : 1) organic matter removal by aeration basin microbe, 2) settleability on secondary clarifier load, 3) removal of nutrients, 4) microbial number increasement and species diversity, 5) microbial activity in aeration basin, 6) oxidation in aeration basin.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.1
• /
• pp.80-85
• /
• 2011

For the assessment of statistical characteristics of wave loads in the real sea state, the probability distribution of wave loads are computed based on the sufficient duration of computations in irregular waves. First of all, the estimation of wave impact loads is well modified applying the displacement potential formulation, which was proposed by one of authors, for solving Wagner's flow model. Consequently, the present computation method is also modified. Prior to the computation in irregular waves, preliminary computation to determine the adequate number of realization of irregular waves is examined. The effect of hull girder vibration on the statistical characteristics is examined by means of the computation with/without hull girder vibration. It is found that hull girder vibration has a certain effect on the probability of occurrence of wave loads. Furthermore, computations taking account of the effect of operation, that is the effects of ship speed and course change, is conducted for the rational evaluation of the effects of hull girder vibration. It is clarified that the effect of operation on the statistical characteristics of wave loads is significant. It is verified that the evaluation without the effect of operation may overestimate the effect of hull girder vibration.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.41-45
• /
• 2002

From the paper which it sees a strong random number generator it uses a fuzzy set from 16 method of the statistical test which is a cryptograph random number test it verifies. 16 statistical test of NIST extends in crptograph and engineering whole it is a scale which is important distinguishes the distinction incapable characterstic of the random numbers which are used. To try introduce a fuzzy set the possibility of having a more strong randomness in order to be, it strengthens the function of the random number generator.

• Communications for Statistical Applications and Methods
• /
• v.19 no.3
• /
• pp.433-450
• /
• 2012

As a worker performs a certain operation repeatedly, he tends to become familiar with the job and complete it in a very short time. That means that the efficiency is improved due to his accumulated knowledge, experience and skill in regards to the operation. Investing time in an output is reduced by repeating any operation. This phenomenon is referred to as the learning curve effect. A learning curve is a graphical representation of the changing rate of learning. According to previous literature, learning curve effects are determined by subjective pre-assigned factors. In this study, we propose a new statistical model to clarify the learning curve effect by means of a basic cumulative distribution function. This work mainly focuses on the statistical modeling of binary data. We employ the Newton-Raphson method for the estimation and Delta method for the construction of confidence intervals. We also perform a real data analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1605-1611
• /
• 2017

In this study, the characteristic lifetime of power facilities such as power transformers and GIS were investigated as the basis of power facility asset management. It is difficult to obtain the operation and failure data of the facilities in Korea. Therefore, the number of failures of the electric power facilities was calculated from the operation data and hazard rate shown in the overseas literatures, and the statistical analysis was performed using the Weibull distribution function. As a result of extracting and analyzing the data of the UK National Grid for power transformers, the characteristic lifetime (scale parameter) of 116.45 years was considered to be a very appropriate value for power transformer management and can be used as a comparative data of the analysis of the domestic transformers. As for the GIS, based on the Bays and Bay-Years data and the hazard rate according to the operation years of the 123kV GIS in Germany, it is found out that the characteristic lifetime of GIS is not so meaningful. It is necessary to decide a maintenance strategy and lifetime expectancy considering the characteristics of the design, materials and manufacturing process of GIS.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1725-1731
• /
• 2010

This paper aims to find out the statistical characteristics of the railroad accidents by weather phenomena. For this, It is investigated occurrence frequency of railroad accidents and operation obstacles from 1996 to 2008 in Korea using the KROIS data and Korea railroad accidents reports. The results are as follows; The occurrence frequency of railroad accidents and operation obstacles decrease gradually, and most of railroad accidents is a railroad traffic accidents. The amount of damages by a railroad weather-related accidents is higher than the one of the railroad accidents and operation obstacles. Weather events which is influenced the railroad weather-related accidents and incidents are rainfall, snowfall, lightning, strong winds. And they have occurred a railroad weather-related accidents and incidents, such as rail obstruction, signal failure, and power supply failure.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.6
• /
• pp.109-118
• /
• 2006

This paper proposes service layout strategy considering service characteristics by the use of benchmarking production system such as layout by P-Q chart, improvement tool, automated system, Toyota production system and lean production system. This paper represents operation methodology of statistical process control using control chart for service performance outcomes.

• Communications for Statistical Applications and Methods
• /
• v.9 no.3
• /
• pp.865-870
• /
• 2002

Burn-in is a widely used method to eliminate the initial failures. Preventive maintenance policy such as age replacement is often used in field operation. In this paper burn-in and maintenance policy are taken into consideration at the same time. The properties of the corresponding optimal burn-in times and optimal maintenance policy are discussed.