• Journal of Microbiology and Biotechnology
• /
• v.20 no.5
• /
• pp.950-957
• /
• 2010

Serratiopeptidase (SRP), a 50 kDa metalloprotease produced from Serratia marcescens species, is a drug with potent anti-inflammatory property. In this study, a powerful statistical design, evolutionary operation (EVOP), was applied to optimize the media composition for SRP production in shake-flask culture of Serratia marcescens NRRL B-23112. Initially, factors such as inoculum size, initial pH, carbon source, and organic nitrogen source were optimized using one factor at a time. The most significant medium components affecting the production of SRP were identified as maltose, soybean meal, and $K_2HPO_4$. The SRP so produced was not found to be dependent on whey protein, but rather was notably induced by most of the organic nitrogen sources used in the study and free from other concomitant protease contaminant, as revealed by protease inhibition study. In addition, experiments were performed using different sets of EVOP design with each factor varied at three levels. The experimental data were analyzed with a standard set of statistical formula. The EVOP-optimized medium, with maltose 4.5%, soybean meal 6.5%, $K_2HPO_4$ 0.8%, and NaCl 0.5% (w/v), gave a SRP production of 7,333 EU/ml, which was 17-fold higher than the unoptimized media. The application of EVOP resulted in significant enhancement of SRP production.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.9
• /
• pp.1238-1249
• /
• 2023

In this study, we sought to investigate the production and optimization of biosurfactants by soil fungi isolated from petroleum oil-contaminated soil in Saudi Arabia. Forty-four fungal isolates were isolated from ten petroleum oil-contaminated soil samples. All isolates were identified using the internal transcribed spacer (ITS) region, and biosurfactant screening showed that thirty-nine of the isolates were positive. Aspergillus niger SA1 was the highest biosurfactant producer, demonstrating surface tension, drop collapsing, oil displacement, and an emulsification index (E₂₄) of 35.8 mN/m, 0.55 cm, 6.7 cm, and 70%, respectively. This isolate was therefore selected for biosurfactant optimization using the Fit Group model. The biosurfactant yield was increased 1.22 times higher than in the nonoptimized medium (8.02 g/l) under conditions of pH 6, temperature 35℃, waste frying oil (5.5 g), agitation rate of 200 rpm, and an incubation period of 7 days. Model significance and fitness analysis had an RMSE score of 0.852 and a p-value of 0.0016. The biosurfactant activities were surface tension (35.8 mN/m), drop collapsing (0.7 cm), oil displacement (4.5 cm), and E₂₄ (65.0%). The time course of biosurfactant production was a growth-associated phase. The main outputs of the mathematical model for biomass yield were Yx/s (1.18), and µ_max (0.0306) for biosurfactant yield was Y_p/s (1.87) and Y_p/x (2.51); for waste frying oil consumption the So was 55 g/l, and Ke was 2.56. To verify the model's accuracy, percentage errors between biomass and biosurfactant yields were determined by experimental work and calculated using model equations. The average error of biomass yield was 2.68%, and the average error percentage of biosurfactant yield was 3.39%.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.68-72
• /
• 2005

Leuconostoc citreum is one of the representative strains of Leuconostoc spp. that show fast growth rates in fermented vegetables. Sequential experimental designs including the Plackett-Burman design, fractional factorial design, steepest ascent analysis, central composite design and response surface methodology were introduced tooptimize and improve the medium for Leuconostoc citreum. Fifteen medium ingredients were examined and glucose (20 g/l), yeast extract (12.5 g/l), sodium acetate trihydrate (6.12 g/l), potassium phosphate (42.55 g/l) and dibasic ammonium citrate (4.12 g/l)were chosen as the best components to give a critical and positive effect for cell-growth. The biomass was increased to 2.79 g/l (169%), compared to the 1.65 g/l in MRS medium.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.4
• /
• pp.278-284
• /
• 2004

Leuconostoc citreum is one of the representative strains of Leuconostoc spp. that show fast growth rates in fermented vegetables. Sequential experimental designs including the Plackett-Burman design, fractional factorial design, steepest ascent analysis, central composite design and response surface methodology were introduced to optimize and improve the medium for L. citreum. Fifteen medium ingredients were examined and glucose ($20 g/\ell$), yeast extract ($12.5g/\ell$), sodium acetate trihydrate ($6.12g/\ell$), potassium phosphate ($42.55g/\ell$), and dibasic ammonium citrate ($4.12g/\ell$), were chosen as the best components to give a critical and positive effect for cell-growth. The biomass was increased to ($2.79g/\ell$), (169%), compared to the $1.65g/\ell$ in MRS medium.

• Ocean and Polar Research
• /
• v.39 no.4
• /
• pp.269-277
• /
• 2017

Medium compositions for the hyperthermophilic archaeon, Thermococcus onnurineus NA1 was statistically optimized to enhance formate-driven hydrogen ($H_2$) production by using response surface methodology. From the Plackett-Burman design-based experiment, it was confirmed that among the minor components of medium such as KCl, $MgSO_4$, $NH_4Cl$, Cystein-HCl, trace elements, Fe-EDTA and $CaCl_2$, the trace elements were screened as the only positively effective components with respect to $H_2$ production. Subsequently, the optimal concentrations of the trace elements and the major components of a medium such as NaCl, yeast extract and sodium formate were determined from the five-level central composite design (CCD)-based experiment. The resulting quadratic model predicted the maximum $H_2$ production of 46.6 mmol/L in serum bottle and it was validated experimentally using the optimal medium initially supplemented with 26.70 g/L of NaCl, 9.81 g/L of sodium formate, 3.50 g/L of yeast extract and 4.59 mL/L of trace elements. From the duplicate batch cultivations in the fermentor using the optimized medium, the a maximum $H_2$ production rate up to 71.8 mmol/L/h could be obtained, which was a 65% enhanced value compared with that obtained using the control medium, showing the high efficiency of the optimized medium.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.7
• /
• pp.739-745
• /
• 2011

During the production of grape wine, the formation of thick leathery pellicle/bacterial cellulose (BC) at the airliquid interface was due to the bacterium, which was isolated and identified as Gluconacetobacter hansenii UAC09. Cultural conditions for bacterial cellulose production from G. hansenii UAC09 were optimized by central composite rotatable experimental design. To economize the BC production, coffee cherry husk (CCH) extract and corn steep liquor (CSL) were used as less expensive sources of carbon and nitrogen, respectively. CCH and CSL are byproducts from the coffee processing and starch processing industry, respectively. The interactions between pH (4.5-8.5), CSL (2-10%), alcohol (0.5-2%), acetic acid (0.5-2%), and water dilution rate to CCH ratio (1:1 to 1:5) were studied using response surface methodology. The optimum conditions for maximum BC production were pH (6.64), CSL (10%), alcohol (0.5%), acetic acid (1.13%), and water to CCH ratio (1:1). After 2 weeks of fermentation, the amount of BC produced was 6.24 g/l. This yield was comparable to the predicted value of 6.09 g/l. This is the first report on the optimization of the fermentation medium by RSM using CCH extract as the carbon source for BC production by G. hansenii UAC09.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.228-232
• /
• 2003

Lovastatin produced by Aspergillus terreus via polyketide pathway is a secondary metabolite with high anti-hypercholesterolemic activity. In this paper we are going to present effective strain development strategies for lovastatin production by comparing the productivity of the mutants obtained through traditional rational screening process and protoplast fusion method. Mutants resistant against various antibiotics and/or antimetabolites showed significantly higher lovastatin productivity than the corresponding mother strains, demonstrating that rational screening method was very efficient in selecting high yielding producers. Recombinant fusants obtained using protoplast fusion between high producers were observed to have very different morphology and physiology as represented by the production and secretion of lovastatin, as well as cell growth pattern. In parallel with the strain development, optimization process for the production medium was carried out in order to find optimal concentrations of the medium components using such a powerful statistical method as response surface method (RSM). It was concluded that not only the optimum production medium but also good morphological characteristics of the high-yielding producers led to higher lovastatin production.

• KSBB Journal
• /
• v.25 no.2
• /
• pp.142-154
• /
• 2010

The protein-bound innerpolysaccharides (IPS) produced by suspended mycelial cultures of Inonotus obliquus have promising potentials as an effective antidiabetic as well as an immunostimulating agents. To enhance IPS production, intensive strain improvement process should be carried out using large amount of UV-mutated protoplasts. During the whole strain-screening process, the stage of solid growth-culture was found to be the most time-requiring step, thus preventing rapid screening of high-yielding producers. In order to reduce the cell growth period in the solid growth-stage, therefore, solid growth-medium was optimized using the statistical methods such as (i) Plackett-Burman and fractional factorial designs (FFD) for selecting positive medium components, and (ii) steepest ascent (SAM) and response surface (RSM) methods for determining optimum concentrations of the selected components. By adopting the medium composition recommended by the SAM experiment, significantly higher growth rate was obtained in the solid growth-cultures, as represented by about 41% larger diameter of the cell growth circle and higher mycelial density. Sequential optimization process performed using the RSM experiments finally recommended the medium composition as follows: glucose 25.61g/L, brown rice 12.53 g/L, soytone peptone 12.53 g/L, $MgSO_4$ 5.53 g/L, and agar 20 g/L. It should be noted that this composition was almost similar to the medium combinations determined by the SAM experiment, demonstrating that the SAM was very helpful in finding out the final optimum concentrations. Through the use of this optimized medium, the period for the solid growth-culture could be successfully reduced to about 8 days from the previous 15~20 days, thus enabling large and mass screening of high producers in a relatively short period.

• Mycobiology
• /
• v.47 no.4
• /
• pp.512-520
• /
• 2019

Statistical experimental methods were used to optimize the medium for mass production of a novel laccase3 (Lac3) by recombinant Saccharomyces cerevisiae TYEGLAC3-1. The basic medium was composed of glucose, casamino acids, yeast nitrogen base without amino acids (YNB w/o AA), tryptophan, and adenine. A one-factor-at-a-time approach followed by the fractional factorial design identified galactose, glutamic acid, and ammonium sulfate, as significant carbon, nitrogen, and mineral sources, respectively. The steepest ascent method and response surface methodology (RSM) determined that the optimal medium was (g/L): galactose, 19.16; glutamic acid, 5.0; and YNB w/o AA, 10.46. In this medium, the Lac3 activity (277.04 mU/mL) was 13.5 times higher than that of the basic medium (20.50 mU/mL). The effect of temperature, pH, agitation (rpm), and aeration (vvm) was further examined in a batch fermenter. The best Lac3 activity was 1176.04 mU/mL at 25 ℃, pH 3.5, 100 rpm, and 1 vvm in batch culture.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.30-40
• /
• 2009

Statistical optimization of the production medium was carried out in order to find an optimal medium composition in itaconic acid fermentation process. Itaconic acid utilized in the manufacture of various synthetic resins is a dicarboxylic acid biosynthesized by fungal cells of Aspergillus terreus in a branch of the TCA cycle via decarboxylation of cis-aconitate. Through OFAT (one factor at a time) experiments, six components (glucose, fructose, sucrose, soluble starch, soybean meal and cottonseed flour) were found to have significant effects on itaconic production among various carbon- and nitrogen-sources. Hence, using these six factors, interactive effects were investigated via fractional factorial design, showing that the initial concentrations of sucrose and cottonseed flour should be high for enhanced production of itaconic acid. Furthermore, through full factorial design (FFD) experiments, negative effects of $KH_2PO_4$ and $MgSO_4$ on itaconic acid biosynthesis were demonstrated, when excess amounts of the each component were initially added. Based on the FFD analysis, further statistical experiments were conducted along the steepest ascent path, followed by response surface method (RSM) in order to obtain optimal concentrations of the constituent nutrients. As a result, optimized concentrations of sucrose and cottonseed flour were found to be 90.4g/L and 53.8g/L respectively, with the corresponding production level of itaconic acid to be 4.36 g/L (about 7 fold higher productivity as compared to the previous production medium). From these experimental results, it was assumed that optimum ratio of the constituent carbon (sucrose) and nitrogen (cottonseed flour) sources was one of the most important factors for the enhanced production of itaconic acid.