• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.31-36
• /
• 2007

This paper presents a novel statistical characterization for accurate timing analysis in Partially-Depleted Silicon-On-Insulator (PD-SOI) circuits in BSIMSOI3.2 100nm technology. The proposed timing estimate algorithm is implemented in Matlab, Hspice, and C, and it is applied to ISCAS85 benchmarks. The results show that the error is within 5% compared with Monte Carlo simulation results.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.186-186
• /
• 2009

The characterization strategy of fracture networks are classified into a deterministic or statistical characterization according to the type of required information. A deterministic characterization is most efficient for a sparsely fractured system, while the statistics are sufficient for densely fractured rock. In this study, the ensemble mean and variability of the effective connectivity is systematically analyzed with various density values for different network structures of a power law size distribution. The results of high resolution Monte Carlo analyses show that statistical characteristics can be a necessary information to determine the transport properties of a fracture system when fracture density is greater than a percolation threshold. When the percolation probability (II) approaches unity with increasing fracture density, the effective connectivity of the network can be safely estimated using statistics only (sufficient condition). It is inferred from conditional simulations that deterministic information for main pathways can reduce the uncertainty in estimation of system properties when the network becomes denser. Overall results imply that most pathways need to be identified when II < 0.5 statistics are sufficient when II $\rightarrow$ 1 and statistics are necessary and the identification of main pathways can significantly reduce the uncertainty in estimation of transport properties when 0.5$\ll$1. It is suggested that the proper estimation of the percolation probability of a fracture network is a prerequisite for an appropriate conceptualization and further characterization.

• Journal of applied mathematics & informatics
• /
• v.40 no.1_2
• /
• pp.69-83
• /
• 2022

We investigate the concept of lacunary statistical convergence and lacunary strongly convergence for sequence of sets in intuitionistic fuzzy metric space (IFMS) and examine their characterization. We obtain some inclusion relation relating to these concepts. Further some necessary and sufficient conditions for equality of the sets of statistical convergence and lacunary statistical convergence for sequence of sets in IFMS have been established. The concept of strong Cesàro summability in IFMS has been defined and some results are established.

• Communications for Statistical Applications and Methods
• /
• v.14 no.1
• /
• pp.147-153
• /
• 2007

In this note, we obtained results related to multiparameter discrete exponential families on considering lattice or semi-lattice in place of N (Natural numbers) in view of Cacoullos-type inequalities via the same arguments in Papathanasiou (1990, 1993).

• Communications for Statistical Applications and Methods
• /
• v.9 no.3
• /
• pp.871-876
• /
• 2002

In this paper, we establish some characterizations of tightness for a sequence of random elements taking values in the space of upper-semicontinuous fuzzy sets with compact support in R.

• Journal of the Korean Statistical Society
• /
• v.18 no.1
• /
• pp.72-79
• /
• 1989

In this article the problem of characterizing multivariate distributions, possessing certain conditional distributions that have the same form as the parent model, are considered. It is shown that the forms of such conditional distributions characterize some well known distributions like the multivariate exponential, multivariate Burr, multivariate Lomax etc.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.2
• /
• pp.56-59
• /
• 2011

The characterization of the chemical mechanical polishing (CMP) process for undensified phophosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been used by experimenters to understand the relationship between the input variables and responses of interest in a simple and efficient way, and it typically is beneficial for determining the appropriatesize of experiments with multiple process variables and making statistical inferences for the responses of interest. The equipment controllable parameters used to operate the machine consist of the down force of the wafer carrier, pressure on the back side wafer, table and spindle speeds (SS), slurry flow (SF) rate, pad condition, etc. None of these are independent ofeach other and, thus, the interaction between the parameters also needs to be understoodfor improved process characterization in CMP. In this study, we selected the five controllable equipment parameters the most recommendedby process engineers, viz. the down force (DF), back pressure (BP), table speed (TS), SS, and SF, for the characterization of the CMP process with respect to the material removal rate and film uniformity in percentage terms. The polished material is undensified PSG which is widely used for the plananization of multi-layered metal interconnects. By statistical modeling and the analysis of the metrology data acquired from a series of $2^{5-1}$ fractional factorial designs with two center points, we showed that the DF, BP and TS have the greatest effect on both the removal rate and film uniformity, as expected. It is revealed that the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that process control based on a better understanding of the process is the key to success in current semiconductor manufacturing, in which the size of the wafer is approaching 300 mm and is scheduled to continuously increase up to 450 mm in or slightly after 2012.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.3
• /
• pp.121-126
• /
• 2012

PURPOSE. The aim of the study was to evaluate the effect of 3 silicone primers and 3 surface characterization of acrylic resin surface on bond strength between silicone elastomer and acrylic resin. MATERIALS AND METHODS. 96 Cosmesil silicones bonded to heat-curing acrylic resin were fabricated with the dimension of $75{\times}10{\times}3$ mm. The 3 primers used in this study were G611 platinum primer, A-330 Gold platinum primer, and cyanoacrylates resin. Specimens without primer were used as control. The 3 types of surface characterization done were retentive holes with 1.5 mm in diameter and 0.5 mm deep, retentive beads of 0.6 mm diameter and the third type which was plain without any characterization. The specimens were then checked for bond strength by subjecting them to $180^{\circ}$ peel test on a universal testing machine. The obtained results were then subjected to statistical analysis using 2-way ANOVA and Scheff$\acute{e}$ multiple post hoc procedures. The statistical significance was set at 5% level of significance. RESULTS. The maximum bond strength was seen for samples in which A-330G primer was used followed by G611 primer. The control group showed the minimum bond strength. Surface characterization of retentive holes increased the bond strength considerably as compared to retentive beads and samples without any surface characterization. CONCLUSION. Within the limitations of the study, A-330G primer was more compatible with Cosmesil M511 silicone and has better bonding of Cosmesil to acrylic resin. Retentive holes made on acrylic surface increased the bond strength considerably than those without any surface characterization.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.11
• /
• pp.2954-2972
• /
• 1998

It is expected that the transport of compressed video will become a significant part of total network traffic because of the widespread introduction of multimedial services such as VOD(video on demand). Accordingly, VBR(variable bit-rate) encoded video will be widely used, due to its advantages in statistical multiplexing gain and consistent vido quality. Since the transport of video traffic requires larger bandwidth than that of voice and data, the characterization of video source and traffic modeling is very important for the design of proper resource allocation scheme in ATM networks. Suitable statistical source models are also required to analyze performance metrics such as packet loss, delay and jitter. In this paper, we analyzed and described on the characterization and traffic modeling of MPEG video sources. The models are broadly classified into two categories; i.e., statistical models and deterministic models. In statistical models, the models are categorized into five groups: AR(autoregressive), Markov, composite Marko and AR, TES, and selfsimilar models. In deterministic models, the models are categorized into $({\sigma},\;{\rho}$, parameterized model, D-BIND, and Empirical Envelopes models. Each model was analyzed for its characteristics along with corresponding advantages and shortcomings, and we made comparisons on the complexity of each model.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.3
• /
• pp.77-86
• /
• 1994

A New environment SENSATION for circuit optimization and statistical analysis has been developed. It provides real time simulation and includes automatic algorithms to assist for reaching optimal solution. Furthermore, statistical analysis environment is presented which aids in Monte Carlo analysis. worst case corner analysis, and sensitivity analysis. These capabilities faciliate the characterization of the effects of several operating conditions and manufacture process paramenters on the design performances. We verify that the proposed methods can obtain the optimal solution of the objective function through several experimental results.