• 한국식품위생안전성학회지
• /
• 제12권1호
• /
• pp.9-14
• /
• 1997

Vibrio mimicus is a closely related species with V. cholerae, and has been reported to be associated with gastrointestinal infections. Although extraintestinal infections of these vibrios have also been reported in Japan and Southeast Asia. But little research papers on V. mimicus was reported in Korea. Therefore, we tried to isolate V. mimicus from the environmental sea water from April to July in Pusan, Korea. Among the isolated strains, we selected the strongest hemolytic strain and then named V. mimicus SM-9. In this paper, we checked the antibiotic susceptibility and psychrotrophic characteristics of the isolated strain. Hemolytic activity of the hemolysin produced by the isolated strain was also measured. V. mimicus was not detected from the sea water samples in April and May, but its detection rate was relatively high in June and July in Pusan, Korea. The bacteriological characteristics of V. mimicus SM-9 were Gram-negative rods, motile, oxidase positive, Voges-Proskauer negative and sucrose negative. In 23 kinds of antibiotics susceptibility test, V. mimicus SM-9 showed susceptibility to the most of antibiotics submitted while it was resistive against lincomycin, oxacillin, rifampin and vancomycin. Hemolytic activity of the hemolysin produced by V. mimicus SM-9 was highest in stationary phase of the growth curve in BHI broth at 37$^{\circ}C$ and its activity was reached 18 HU per $m\ell$ of culture supernatant. For checking the psychrotrophic property of V. mimicus SM-9, the decreasing rate of the strain in phosphate buffer solution and yellowtail flesh homogenate was examined during the storage at 4, 0, -4 and -2$0^{\circ}C$. The decreasing rates of the selected strain stored in phosphate buffer solution were greater than those in fish homogenate. Decreasing rates of V. mimicus SM-9 stored in phosphate buffer solution were not significantly different by the storage temperatures. The viable cell counts of the strain were decreased as 5 log cycles after 120 hours at all the tested temperatures. While decreasing numbers of the strain in fish homogenates were 2*4 log cycles after 120 hours. The decreasing pattern of the strain numbers were very slow after 200 hours at all the stored temperatures.

• 한국초지조사료학회지
• /
• 제29권1호
• /
• pp.51-62
• /
• 2009

본 연구는 돈분슬럿지에 함유되어 있는 구리와 아연을 제거하여 합리적인 돈분슬럿지 자원 화비료 생산법을 연구하였고 돈분슬럿지 자원화비료를 시비 후 옥수수를 재배한 토양과 식물체를 분석하여 돈분슬럿지 자원화비료의 안정성을 조사한 바 그 결과는 다음과 같다. 돈분슬럿지의 화학적 특성 중 비효성분으로는 질소와 인산의 함량이 각각 4.4%와 6.29%이며 pH는 7.57로써 작물의 생육에 적합수준이나 돈분슬럿지에 함유되어 있는 중금속인 구리와 아연의 함량은 각각 805mg/kg, 1,704mg/kg으로 비료의 제한기준인 300mg/kg, 900mg/kg 보다 높아 적절한 퇴비화과정을 거치치 않고 토양에 직접 시비하였을 경우에는 토양에 중금속 집적이라는 토양오염을 유발할 소지가 있다고 사료된다. 유기산 9종류를 제조하여 중금속을 제거한바 구연산1수화물의 경우에는 구리 58%, 아연 97%를 제거하였고 옥살산2수화물의 경우에 는 구리와 아연 각각 48%, 56%의 제거율을 보인바 구연산1수화물을 구리와 아연의 제거용액으로 선정하고 증류수에 유기산용액의 혼합비율을 25%, 50%, 75%, 100% 4가지 수준으로 나누어 구리와 아연의 중금속 제거율을 측정한 바, 유기산용액의 혼합비율이 많아질수록 구리와 아연의 제거율이 정의상관관계를 나타내고 있으며 유기산용액 100% 수준에서는 돈분슬럿지의 잔존 구리와 아연의 함량은 330.03mg/kg, 41.28mg/kg로 구리의 경우에는 59% 아연의 경우에는 97%의 제거율을 나타내고 있다. 교반식 퇴비화과정으로 돈분슬럿지의 자원화 처리를 진행한 바 교반식 퇴비화 과정이 정체식 퇴비화 과정에 비하여 안정화 기간이 짧았고 이러한 안정화 단계는 온도변화에서 확인할 수 있는데 교반식의 경우에는 최고의 온도가 $4^{\circ}C$ 더 높게 나타났으며 안정화 최종단계라고 판단할 수 있는 온도 하강의 경우에도 교반식이 정체식에 비하여 7일 빠르게 진행된 것으로 나타난 바 교반식 퇴비화과정이 정체식 퇴비화과정보다 효율이 높다고 사료된다. 구연산1수화물로 돈분슬럿지의 구리와 아연을 제거한 후 돈분슬럿지의 pH가 강산성 수준인 2 이하로 낮아졌는데 이는 돈분슬럿지가 저유기산이라도 구연산1수화물에 48시간동안 접촉하는 과정에서 화학적 특성이 변화된 것으로 사료되며, pH를 조절하기 위하여 소석회와 부자재를 혼합하여 퇴비화과정을 진행하여야 자원화비료로써의 활용가치가 높아진다. pH, EC 및 함수율의 안정화는 교반식 퇴비화과정이 정체식 퇴비화과정보다 빠르게 나타났다. 식물발아 실험인 Germination index 지수에서도 확인가능한데 교반식의 경우에는 안정화 단계의 기준인 Germination index 지수 80의 도달시점이 3주이내보다 정체식의 경우에는 4주 이후에 안정화기준인 80이 관찰되었다. 그러므로 생산기간의 단축에 의한 생산비 절감측면에서 볼 때 정체식 퇴비화공정보다는 교반식 퇴비화과정이 돈분슬럿지의 자원화비료 생산에 합리적인 퇴비화방법이라고 사료된다. 중금속의 함유량 등을 조사하여 토양과 사일리지 옥수수의 체내 안정성을 검사한바 옥수수 재배 후에 토양의 구리와 아연의 함량은 구연산1수화물로 중금속을 제거한 처리구2의 경우에는 구리, 아연의 함량이 각각 2.40mg/kg, 4.26mg/kg으로 돈분슬럿치만을 시비한 처리구3의 구리와 아연의 함량 8.00 mg/kg, 22.37mg/kg에 비하여 낮은 수준으로 나타나고 있다. 식물체인 청안옥의 중금속 함량도 식물체 부위별로 돈분슬럿지만을 시비한 처리구3이 구연산 1수화물로 중금속을 제거한 처리구2 보다 최소2배에서 최대 4배까지 높았다.

• 대한기계학회논문집A
• /
• 제30권7호
• /
• pp.741-749
• /
• 2006

For last couple of decades, uses of TFI-LCDs have been expanded to many FPD(Flat Panel Display) applications including mobile displays, desktop monitors and TVs. Furthermore, there has been growing demand for increasingly larger LCD TVs. In order to meet this demand as well as to improve productivity, LCD manufactures have continued to install larger-generation display fabrication facilities which are capable of producing more panels and larger displays per mother glass(substrate). As the size of mother glass becomes larger, a robot required to handle the glass becomes bigger accordingly, and its end effectors(arms) are extended to match the glass size. With this configuration, a considerable static deflection occurs at the end of the robot arms. In order to stack maximum number of mother glasses on a given footprint, the static deflection should be compensated. This paper presents a novel static deflection compensation algorithm. This algorithm requires neither measurement instrument nor additional vertical axis on the robot. It is realized by robot controller software. The forward and inverse kinematics considering compensation always guarantees a unique solution, so the proposed algorithm can be applied to an arbitrary robot position. The algorithm reduced static deflection by 40% in stationary robot state experiment. It also improved vertical path accuracy up to 60% when the arm was running at its maximum speed. This algorithm has been commercialized and successfully applied to a seventh-generation LCD glass-handling robot.

• 한국환경과학회지
• /
• 제21권1호
• /
• pp.113-123
• /
• 2012

A unit emission reduction of nitrous oxide ($N_2O$) from anthropogenic sources is equivalent to a 310-unit $CO_2$ emission reduction because the $N_2O$ has the global warming potential (GWP) of 310. This greatly promoted very active development and commercialization of catalysts to control $N_2O$ emissions from large-scale stationary sources, representatively nitric acid production plants, and numerous catalytic systems have been proposed for the $N_2O$ reduction to date and here designated to Options A to C with respect to in-duct-application scenarios. Whether or not these Options are suitable for $N_2O$ emissions control in nitric acid industries is primarily determined by positions of them being operated in nitric acid plants, which is mainly due to the difference in gas temperatures, compositions and pressures. The Option A being installed in the $NH_3$ oxidation reactor requires catalysts that have very strong thermal stability and high selectivity, while the Option B technologies are operated between the $NO_2$ absorption column and the gas expander and catalysts with medium thermal stability, good water tolerance and strong hydrothermal stability are applicable for this option. Catalysts for the Option C, that is positioned after the gas expander thereby having the lowest gas temperatures and pressure, should possess high de$N_2O$ performance and excellent water tolerance under such conditions. Consequently, each de$N_2O$ technology has different opportunities in nitric acid production plants and the best solution needs to be chosen considering the process requirements.

• Radiation Oncology Journal
• /
• 제12권3호
• /
• pp.295-300
• /
• 1994

It was the purpose of present study to develop a new thermoseed for heating deep-seated tumors and assessment of the effect of magnetic control on thermoseeds. Aqueous suspension of iron micro spheres (Ferropolysaccharide) was injected directly into the VX-2 hepatoma and heated with 1.2 MHz inductive radiofrequency unit. Aqueous thermoseed suspension was delivered to the tumor by simple percutaneous injection. The limitation of the thermoseed heating method is the positional change of thermoseed particles in the tumor after implantation. The thermoseed particles could enter the systemic blood circulation and cause a severe embolization of a critical organ. To minimize this limitation, we have used the magnetic control after loading the thermoseed in the tumor, W hen ferropolysaccharides were exposed to a strong magnetic field, they magnetized and subsequently exerted a magnetic force on each other, forming larger aggregates of particles. The size of aggregated Particles were too big to enter the systemic blood circulation. Thus, unlike other thermoseed method, we hold the thermoseed particles stationary in the tumor. The temperature of the injected site and immediate vicinity elevated by $4-5^{\circ}C$. The temperature of the surrounding normal hepatic tissue elevated by $1-2^{circ}C$ only. The heating effect within the tumor was variable depending on the density of ferromagnetic aqueous suspension. Our results suggest that inductive heating of tumor injected with ferropolysaccharide solution offers the possibility of effective heat delivery to the defined tumor volume, which is difficult to heat with other heating devices.

• 분석과학
• /
• 제30권2호
• /
• pp.57-67
• /
• 2017

This study was conducted to develop an analytical technique for determination of chlorite and chlorate concentrations in fresh-cut food and dried fish products by an ion chromatography/conductivity detection method using a hydroxide mobile phase. Deionized water was added to homogenized samples, which were then extracted by ultrasound extraction and centrifuged at high speed (8,500 rpm). Subsequently, a Sep-Pak tC18 cartridge was used to purify the supernatant. Chlorite and chlorate ions were separated using 20 mM KOH solution as the mobile phase and Dionex IonPac AS27 column as the stationary phase. Ethylenediamine was used as sample preservative and dibromoacetate was added to adjust for the disparity in extraction efficiencies between the food samples. The method detection limit) for chlorite and chlorate were estimated to be 0.2 mg/kg and 0.1 mg/kg, respectively, and the coefficient of determination ($r^2$) that denotes the linearity of their calibration curves were correspondingly measured to be 0.9973 and 0.9987. The recovery rate for each ion was 92.1 % and 96.3 %, with relative standard deviations of 7.47 % and 6.18 %, respectively. Although neither chlorite nor chlorate was detected in the food samples, the analytical technique developed in this study may potentially be used in the analysis of disinfected food products.

• Journal of Microbiology and Biotechnology
• /
• 제23권9호
• /
• pp.1260-1268
• /
• 2013

A series of experiments were carried out with three native strains of microalgae to measure growth rates, biomass, and lipid productivities. Scenedesmus sp. IMMTCC-6 had better biomass growth rate and higher lipid production. The growth, lipid accumulation, and carbon dioxide ($CO_2$) consumption rate of Scenedesmus sp. IMMTCC-6 were tested under different NaOH concentrations in modified BBM. The algal strain showed the maximum specific growth rate (0.474/day), biomass productivity (110.9 mg $l^{-1}d^{-1}$), and $CO_2$ consumption rate (208.4 mg $l^{-1}d^{-1}$) with an NaOH concentration of 0.005 M on the $8^{th}$ day of cultivation. These values were 2.03-, 6.89-, and 6.88-fold more than the algal cultures grown in control conditions (having no NaOH and $CO_2$). The $CO_2$ fixing efficiency of the microalga with other alternative carbon sources like $Na_2CO_3$ and $NaHCO_3$ was also investigated and compared. The optimized experimental parameters at shake-flask scale were implemented for scaling up the process in a self-engineered photobioreactor. A significant increase in lipid accumulation (14.23% to 31.74%) by the algal strain from the logarithmic to stationary phases was obtained. The algal lipids were mainly composed of $C_{16}/C_{18}$ fatty acids, and are desirable for biodiesel production. The study suggests that microalga Scenedesmus sp. IMMTCC-6 is an efficient strain for biodiesel production and $CO_2$ biofixation using stripping solution of NaOH in a cyclic process.

• 터널과지하공간
• /
• 제12권4호
• /
• pp.277-283
• /
• 2002

본 연구는 안쪽축이 회전하고 바깥쪽 실린더는 정지해있는 반경비가0.52이고 30$^{\circ}$ 경사진 동심 환형관내의 헬리컬 유동 특성에 관한 것이다. 비뉴튼 유체인 UC 수용액과 벤토나이트 수용액을 사용하여 안쪽축이 0~400pm으로 회전할 때 축방향 유동을 완전히 발달시킨 후 축방향 압력손실값을 측정하였다. 또한, 헬리컬 유동의 가시화는 불안정한 파를 관찰하기 위해 수행되었다. 현재 연구 결과는 표면마찰계수에 대해 로스비순(Ro)와 레이놀즈수(Re)의 관계를 나타내었다. 또한, 그 결과들은 유동 불안정성 메카니즘의 존재를 보인다. 축회전수가 증가함에 따라 압력손실이 증가하지만, 그 증가폭은 천이 및 난류영역에서는 레이놀즈수가 증가할수록 감소하며, 회전의 영향으로 유동교란이 증진되어 천이가 촉진된다. 또, 이런 유동교란의 증진은 표면마찰계수값의 증가와 함께 임계 레이놀즈수(Re$_{c}$)를 작게 만든다.

• KSBB Journal
• /
• 제11권4호
• /
• pp.438-444
• /
• 1996

모델 재조합 단백질인 $\beta$galactosidase를 발현하 는 Vaccinia virus를 생산하기 위하여 숙주 동물세 포의 배양조건을 관찰한 결과 감염비 5일 경우 H HeLa는 감염후 60시간 후, HeLa 83는 감염후 40 시간 후에 회수할 때 최 대 의 ${\beta}$-galactosidase 수율 을 얻을 수 있으며, 세포가 대수증식기 일 때 감염하 고 배양온도는 $37^{\circ}C$ 로 하는 것이 최적 배양조건으로 나타났다. 감염후 혈청의 농도는 단백질 수율에 크 게 영향을 미치지는 않으나 3~5% 에서 가장 높은 단백질 수율을 보였으며, 낮은 이온 농도의 용액으 로 세포층을 세척하는 것과 virus 감염시 온도를 20~∼$30^{\circ}C$ 로 낮추는 것은 Vaccinia-HeLa system에서 감염능 증대 효과를 나타내 였다. Dexamethasone 전처리는 HeLa 83에서 ViruS 복제 증대를 HeLa에 서는 virus 복제 감소를 가져왔다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.324-329
• /
• 2001

This experimental study concerns the characteristics of a transitional flow in a concentric annulus with a diameter ratio of 0.52, whose outer cylinder is stationary and inner one rotating. The pressure losses and skin-friction coefficients have been measured for the fully developed flow of $0.1\sim0.4%$ aqueous solution of sodium carbomethyl cellulose (CMC), respectively at inner cylinder rotational speed of $0\sim600rpm$. The transitional flow has been examined by the measurement of pressure losses to reveal the relation of the Reynolds and Rossby numbers with the skin-friction coefficients. The present results show that the skin-friction coefficients have the significant relation with the Rossby numbers, only for laminar regime. The occurrence of transition has been checked by the gradient changes of pressure losses and skin-friction coefficients with respect to the Reynolds numbers. The increasing rate of skin-friction coefficients due to the rotation in uniform for laminar flow regime, whereas it is suddenly reduced for transitional flow regime and, then, is gradually declined for turbulent flow regime. Consequently, the critical(axial-flow) Reynolds number decrease as the rotational speed increases. Thus, the rotation of inner cylinder promotes the early occurrence of transition due to the onset of taylor vortices.