• 토지주택연구
• /
• 제11권3호
• /
• pp.33-37
• /
• 2020

The aim of this paper is to scrutinize the relation between Business Survey Index and Industrial Production Index in construction industry, stated in another way, the relation between CEO's expectations of future business status and real business activity in construction industry. Previous papers on this research area have been examined the relation between released BSI and released IPI. However, this paper focuses 'the relation between released BSI and the long-run component of IPI' and 'the relation between released BSI and the short-run component of IPI'. The first step is to decompose released IPI by unobserved component model. The long-run component of IPI is set up as a random walk process. And short-run component is set up as a stationary AR(1) process. The findings are as follows. First, released BSI Granger causes unidirectionally released IPI. Second, there exists one-way Granger causality from released BSI to long-run component of IPI. Third, Granger causality does not exist between released BSI and 'short-run component of IPI'. BSI increases IPI in the second or third month. These findings of this paper mean that CEO's expectations may influence industrial production in construction industry.

• Journal of Microbiology and Biotechnology
• /
• 제17권2호
• /
• pp.244-252
• /
• 2007

Escherichia coli has a PhoR-PhoB two-component regulatory system to detect and respond to the changes of environmental phosphate concentration. For the E. coli W3110 strain growing under phosphate-limiting condition, the changes of global gene expression levels were investigated by using DNA microarray analysis. The expression levels of some genes that are involved in phosphate metabolism were increased as phosphate became limited, whereas those of the genes involved in ribosomal protein or amino acid metabolism were decreased, owing to the stationary phase response. The upregulated genes could be divided into temporarily and permanently inducible genes by phosphate starvation. At the peak point showing the highest expression levels of the phoB and phoR genes under phosphate-limiting condition, the phoB- and/or phoR-dependent regulatory mechanisms were investigated in detail by comparing the gene expression levels among the wild-type and phoB and/or phoR mutant strains. Overall, the phoB mutation was epistatic over the phoR mutation. It was found that PhoBR and PhoB were responsible for the upregulation of the phosphonate or glycerol phosphate metabolism and high-affinity phosphate transport system, respectively. These results show the complex regulation by the PhoR-PhoB two-component regulatory system in E. coli.

• 한국실내디자인학회논문집
• /
• 제19권1호
• /
• pp.75-84
• /
• 2010

This study will establish the transformal characteristics of architectural visual information by investigating: how contemporary architects perceive and process multifaceted architectural information via the expression media since 1970s. The purposes and results of this study are summarized as follows: This study established the contemporary transformal characteristics by comparing the expression methods of traditional architects with the transformal characteristics of visual information derived from the contemporary architectural expression media. In a pluralistic information society, the expression methods of the past, which recognize space as a stationary, unidimensional visual point on a drawing surface, is now changing to the mixed, multidimensional expression methods that connect various visual points on a limited drawing surface. Furthermore, the rapid advancement of digital media is changing, from a method which simply arranges visual information, to a flexible visual tool which can process architecture sequentially and simultaneously. As the communication structure of architecture is moving toward an individual-centered two-way communication type, the information delivery method is used to visualize conceptual, inferential information, rather than visualizing realistic information which simply records facts. In the past, multidimensional, non-linear forms could not be processed by the conventional design processes and sketch work, but now they can be expressed via digital media.

• 한국기계가공학회지
• /
• 제18권1호
• /
• pp.85-93
• /
• 2019

Oil seals are most essential parts in mechanical lubrication system to maintain the close gaps between stationary and high rotating components, and to help prevent oil leakages. Oil seals also can prevent harmful contaminants entering from outside to machinery, especially in severe environments. Therefore, the oil seals have an important performance in the machinery components. The performance of the oil seals are influenced by the design variables such as amount of interference gap between the main lip and shaft, the angle of main lip at air and oil sides and the distance between the garter spring and main lip. In the present study, a finite element analysis was performed to evaluate the oil seal performance with the considerations of number of oil seal dust lips and angle of the lip at oil side with the different design variables. As a result from the FEM analysis, the stress and contact pressure distributions was derived, based on this, performance of the sealing and durability were determined.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.283-294
• /
• 2023

APro, developed in KAERI for the process-based total system performance assessment (TSPA) of deep geological disposal systems, performs finite element method (FEM)-based multiphysics analysis. In the FEM-based analysis, the mesh element quality influences the numerical solution accuracy, memory requirement, and computation time. Therefore, an appropriate mesh structure should be constructed before the mesh stability analysis to achieve an accurate and efficient process-based TSPA. A generic reference case of DECOVALEX-2023 Task F, which has been proposed for simulating stationary groundwater flow and time-dependent conservative transport of two tracers, was used in this study for mesh stability analysis. The relative differences in tracer concentration varying mesh structures were determined by comparing with the results for the finest mesh structure. For calculation efficiency, the memory requirements and computation time were compared. Based on the mesh stability analysis, an approach based on adaptive mesh refinement was developed to resolve the error in the early stage of the simulation time-period. It was observed that the relative difference in the tracer concentration significantly decreased with high calculation efficiency.

• International Journal of Automotive Technology
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

Wastes such as shredder dust of disposed vehicles can be decomposed into low calorific flammable gases by Pyrolysis gasification. A stationary electric Power generation using an internal combustion engine fuelled with the waste-pyrolysis gas is an effective way to ease both waste management and energy saving issues. The waste-pyrolysis gas mainly consists of H$_2$, CO, $CO_2$ and $N_2$. The composition and heating value of the gas generated depend on the conversion process and the property of the initial waste. This research analyzed the characteristics of the combustion and the exhaust emissions in a premixed charge spark ignition engine fuelled with several kinds of model gases, which were selected to simulate the pyrolysis-gases of automobile shredder dusts. The influences of the heating value and composition of the fuel were analyzed parametrically. Furthermore, optical analyses of the combustion flame were made to study the influence of the fuel's inert gas on the flame propagation.

• Journal of the Korean Statistical Society
• /
• 제20권2호
• /
• pp.139-146
• /
• 1991

A generalization of an earlier diffusion model for system subject to continuous wear is presented. It is assumed that the state of the system is modelled by Brownian motion with negative drift and an absorbing barrier at the origin. A repairman arrives according to a stationary renewal process and increases the state of the system by a random amount if the state does not exceed a threshold. Various properties of this model are investigated including the distribution of the state of the system at time t, the first passage time to state 0 and the probability that the state of the system exceeds a certain level throughout a specified interval.

• 한국국방경영분석학회지
• /
• 제11권1호
• /
• pp.111-129
• /
• 1985

Markov chains with large transition probability matrices occur in many applications such as manpowr models. Under certain conditions the state space of a stationary discrete parameter finite Markov chain may be partitioned into subsets, each of which may be treated as a single state of a smaller chain that retains the Markov property. Such a chain is said to be 'lumpable' and the resulting lumped chain is a special case of more general functions of Markov chains. There are several reasons why one might wish to lump. First, there may be analytical benefits, including relative simplicity of the reduced model and development of a new model which inherits known or assumed strong properties of the original model (the Markov property). Second, there may be statistical benefits, such as increased robustness of the smaller chain as well as improved estimates of transition probabilities. Finally, the identification of lumps may provide new insights about the process under investigation.

• The Journal of the Acoustical Society of Korea
• /
• 제17권3E호
• /
• pp.43-46
• /
• 1998

Many of the active noise control system utilize a form of the least mean square(LMS) algorithm. This paper discusses the dependence of the convergence rate on the acoustic error path in the popular algorithm which is conventional "filtered-x LMS" and introduces new algorithm "constrained filtered-x LMS". The proposed method increase the convergence region regardless of the time-delay in the acoustic error path. In the algorithms, coefficients of the controller are adapted using the residuals of constrained structure which are defined in such a way that the control process become stationary. Advantages of constrained filtered-x LMS algorithm is illustrated by convergence analysis in the mean sense.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.159-161
• /
• 2004

Many motion object detection algorithms rely on the process of background subtraction, an important technique that is used for detecting changes from a model of the background scene. This paper propose a novel method to update the background model image of a visual surveillance system which is not stationary. In order to do this, we use a background model based on statistical qualities of monitored images and another background model that excluded motions. By comparing each changed area computed from the two background model images and current monitored image, the areas that will be updated are decided.