• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.46-49
• /
• 2005

This paper presents the electrical characteristics of metal oxide varistors for lightning surge arresters. ZnO varistors were fabricated with typical ceramic production methods and two types of varistors were also prepared to be compared. The nominal discharge current and line discharge class of those varistors are $10kA(8/20{\mu}s)$ and class 3, respectively. The diameter of varistors manufactured and prepared were in the range of 61.6~65.0mm and the thickness of those were in the range of 27~42.52mm. The reference and residual voltage were tested and reference and residual voltage per 1mm and the ratio of reference and residual voltage were calculated. The reference voltage per 1mm of varistors manufactured was about 175V/mm but that of A's and B's varistors was nearly 200V/mm. The residual voltage exhibited the same trends as the reference voltage, so the reference and residual voltage per 1mm of domestic varistors should be increased. According to the results of tests, it is thought that if the reference and residual voltage per 1mm were increased to 200V/mm and 330V/mm, domestic ZnO varistors would be possible to apply to the station class arresters in the near future.

• Management Science and Financial Engineering
• /
• 제2권1호
• /
• pp.123-145
• /
• 1996

We consider a priority-based multiclass queue with probabilistic feed-back. There are J service stations. Each customer belongs to one of the several priority classes, and the customers of each class arrive at each station in a Poisson process. A single server serves queued customers on a priority basis with a nonpreemptive scheduling discipline. The customers who complete their services feed back to the system instantaneously and join one of the queues of the stations or depart from the system according to a given probability. In this paper, we propose a new method to simplify the analysis of these queueing systems. By the analysis of busy periods and regenerative processes, we clarify the underlying system structure, and systematically obtain the mean for the sojourn time, i.e., the time from the arrival to the departure from the system, of a customer at every station. The mean for the number of customers queued in each station at an arbitrary time is also obtained simultaneously.

• Journal of applied mathematics & informatics
• /
• 제8권3호
• /
• pp.1035-1045
• /
• 2001

We present two decomposition approximations for the mean sojourn times in open single class queing networks. If there is a single bottleneck station, the approximations are asymptotically exact in both light and heavy traffic. When applied to a Jackson network or an M/G/1 queue, these approximations are exact for all values of the traffic intensity.

• Journal of Plant Biology
• /
• 제2권2호
• /
• pp.22-24
• /
• 1959

1. In this paper the author reports on 16 species fo the higher fungi, Which were collected in the Dagelet Island during the periods of October 5-22, 1958. 2. They are Classified as follows : 1. Class, 2 subClasses, 4 orders, 8 families, 13 genera and 16 species. Among them 2 unrecorded species are included.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.710-715
• /
• 2004

The design problem of manufacturing system is addressed, adopting the closed queueing network model with multiple loops and re-entrant flows. The entire design problem is divided into two hierarchical sub-problems of (1) determining the station configuration and (2) optimizing the lot constitution; then they are tackled by neighbor search algorithm (NSA) and greedy mean value analysis (GMVA), respectively. Unlike the conventional MVA concerning multi-class closed queueing networks, the GMVA doesn't stick to a fixed lot proportion; rather it tries to find the optimal balance. The NSA, on the other hand, improves the object function value by altering the station configuration successively with its superior neighbor. The moderate time complexity, presented in big-${o}$ notation, enables us to apply the method even to the large-size practical cases, and the CPU time of an enlarged problem can be approximated by the same equation. The validity of our analytic approach is backed up by simulation studies with a widespread simulation package.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2011년도 춘계학술발표대회 논문집
• /
• pp.147-152
• /
• 2011

The purpose of this study is to find out the commercialization cause of 2nd class residential area in urban center as basic research to protect urban residential area against the pressure of commercialization. Through the research that are based on literature, field survey and urban planning map, it analysed the commercialization cause of selected two sites under similar urban condition ; to be a nearby subway station and to be a famous commercial street in site, etc. The consequences of this study are summarized as follows ; First the distance between subway station and residential block and residential commercialization are in inverse proportion each other. Second, the corner lot of a block and the access street directly connected collector street are very important factors to spread commercialization to residential area. Finally, nevertheless first and second results, there is square zone which is very high rate of commercialization within one regardless the distance between subway and residential block. the maximum range of square zone is assumed about 250 meter based on case study.

• 한국전기전자재료학회논문지
• /
• 제19권4호
• /
• pp.398-403
• /
• 2006

This paper describes the evaluation of the long duration current impulse withstand characteristics of ZnO blocks for high voltage surge arresters. Four ZnO varistors were manufactured with the general ceramic production method and the long duration current impulse withstand test, electrical uniformity evaluation test and microstructure observation were performed. All varistors exhibited high density, which was in the range of $5.42{\sim}5.46g/cm^3$. In the electrical properties, the reference voltage of samples was in the range of $5.11{\sim}5.25\;kV$ and the residual voltage was in the range of $8.314{\sim}8.523\;kV$. In the long duration current impulse withstand test, sample No.2 and No.3 failed at the 2nd and 4th shot of series impulse currents, respectively, but the rest survived 18 shots during the test. Before and after this test, the variation ratio of the residual voltage of samples survived was below 0.5 %, which was in the acceptance range of 5 %. According to the results of the test, it is thought that if the soldering method is improved, ZnO varistors would be possible to apply to the high voltage arresters like the station class and transmission line arresters in the near future.

• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1061-1066
• /
• 2006

This paper presents the electrical characteristics with manufacturing process and performance evaluation of high performance zinc oxide varistors. ZnO varistors were fabricated with typical ceramic production methods with different thickness and the structural and electrical characteristics of ZnO varistors were investigated. All varistors exhibited high density, which was in the range of $5.41{\sim}5.49g/cm^3$. In the electrical properties, the reference voltage increased in the range of $4.410{\sim}5.250kV$ with increasing their thickness and the residual voltage exhibited the same trends as the reference voltage. In the long duration current impulse withstand test, E-2 and F-1 samples failed at the two and four shots of impulse current, respectively, but E-1 and F-2 samples survived 18 shots during the test. Before and after this test, the variation ratio of residual voltage of E-1 and F-2 samples were -0.34 % and 0.05 %, respectively, which were in the acceptance range of 5 %. According to the results of tests, it is thought that if the fabrication process such as insulating coating, sintering condition, and soldering method is improved, these ZnO varistors would be possible to apply to the station class arresters in the near future.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1146-1149
• /
• 2004

A new developed impulse current test system(100kV, 250kJ)is presented, which can carry out all impulse current and performance tests on surge arrester sections with rated voltage up to 12kV according to IEC 60099-4(2001). The maximum achievable peak value is 200kA for the impulse current $4/10{\mu}s$ and 60kA for the $30/80{\mu}s$ and $8/20{\mu}s$. The long duration current impulse is realized from class 1 to class 5. The digital transient recorder(4 channels 60MS/S 10bit) is used for measuring AC voltage, impulse current, reference voltage and leakage current. The complex control, measuring, evaluation and data storage system is controlled by one industrial PC system.

• 한국초지조사료학회지
• /
• 제5권2호
• /
• pp.93-99
• /
• 1985

1984년도(年度) 초지조성(草地造成) 대상지(對象地) 10,077ha에 대한 환경조건(環境條件)과 토양(土壤)의 이화학적(理化學的) 특성(特性)을 조사(調査)하여 초지조성(草地造成) 및 시책자료(施策資料)를 제공(提供)코자 수행(遂行)한 결과(結果)는 다음과 같다. 1. 신분류체계(新分類體系)에 의한 토양분류단위(土壤分類單位)는 일(日) 4, 아목(亞目) 7, 대군(大群)11, 아군(亞群)28 및 통(統) 105개로 분류(分類)되었다. 2. 초지조성면적(草地造成面積) 3.0ha이하로 경영(經營)하는 농가(農家)는 70.8%로 면적(面積)은 35.9%였으며, 불경운(不耕耘) 초지조성면적(草地造成面積)이 71.3%였다. 3. 초지조성(草地造成) 대상지(對象地)는 구릉지(丘陵地)와 산여지(山麗地)에 82.0% 분포(分布)하였고 경사(傾斜) 30%이하(以下)가 66.9%였다. 4. 조립질토양(粗粒質土壤)이 85.0, 유효토심 20cm이하(以下)이 97.8, 그리고 석력함량(石礫含量) 35%이상(以上)이 1.6%였다. 5. 초지토양(草地土壤)의 적성등급(適性等級) 구분(區分)은 1등급(等級)이 67.32 등급(等級) 29.7 그리고 3등급(等級) 3.0%였다. 6. 표토(表土)의 평균(,平均) pH는 5.6, 유효인산 31ppm, 유기물(有機物) 3.2%, 그리고 Ca, Mg 및 K는 각각(各各) 2.23, 1.05 및 0.37me/100gr였다.