• Physical Therapy Rehabilitation Science
• /
• v.10 no.3
• /
• pp.270-277
• /
• 2021

Objective: The purpose of this study is to compare the effect of static balance, lower extremity function, and gait ability between a lower extremity restrain robot gait training and a general robot gait training in subacute stroke subjects. Design: Two-group pretest-posttest design. Methods: A total of 12 subacute stroke patients were randomly divided into an Experimental group (n=6) and a control group (n=6). Both groups were performed for four weeks, three times a week, for 20 minutes. To compare the Static balance function, the center of pressure (COP) path-length and COP velocity were measured. The Fugl-Meyer assessment lower extremity (FMA-LE) were evaluated to compare the Lower Extremity function. 2D Dartfish Program and 10 Meter Walking Test (10 MWT) on Gait ability were evaluated to compare the gait function. Results: In the intra-group comparison, Experimental groups showed significant improvement in COP path-length, velocity, Lower Extremity Function, 10 MWT, Cadence, by comparing the parameters before and after the intervention (p<0.05). Comparison of the amount of change between groups revealed significant improvement for parameters in the COP path-length, velocity, Lower extremity function, 10 MWT by comparing the parameters before and after the intervention (p<0.01). Conclusions: The Experimental group showed enhanced efficacy for variables such as COP path-length, velocity, Lower extremity function, 10 MWT as compared to the control group.

• Wind and Structures
• /
• v.25 no.6
• /
• pp.551-567
• /
• 2017

Studies of unsymmetrical blade H-Darrieus rotors at low wind speeds in terms of starting time, static torque, and power performances for different blade parameters: thickness-to-chord (t/c), camber position, and solidity are scarce. However these are required for knowing insights of rotor performances to obtain some design guidelines for the selection of these rotors. Here, an attempt is made to quantify the effects of these blade parameters on the performances of three different H-Darrieus rotors at various low wind streams. Different blade profiles, namely S815, EN0005 (both unsymmetrical), and NACA 0018 (symmetrical blade for comparison) are considered. The rotors are investigated rigorously in a centrifugal blower apparatus. Firstly the dynamic and static performances of the rotors are evaluated to determine the best performing rotor and their optimum solidity. Generalised performance equations are developed based on selected blade parameters which are validated for the unsymmetrical rotors. Further, the starting time is quantified with respect to the rotor inertia to determine the suitable range of inertia that helps the unsymmetrical blade rotor to self-start earlier than the symmetrical one. This study can work as a benchmark for the selection of optimum blade parameters while designing an unsymmetrical blade rotor at low wind speeds.

• Journal of Photoscience
• /
• v.11 no.1
• /
• pp.11-17
• /
• 2004

Fluorescence quenching of l,4-bis [2-(2-methylphenyl) ethenyl]-benzene (Bis-MSB) by carbon tetrachloride in five different solvents namely hexane, cyclohexane, toluene, benzene and dioxane has been carried out at room temperature with a view to understand the quenching mechanisms. The Stern-Volmer plot has been found to be non-linear with a positive deviation for all the solvents studied. In order to interpret these results we have invoked the Ground state complex and Sphere of action static quenching models. Using these models various rate parameters have been determined. The magnitudes of these parameters imply that sphere of action static quenching model agrees well with the experimental results. Hence the positive deviation in the Stem-Volmer plots is attributed to the static and dynamic quenching. Further, with the use of Finite Sink approximation model, it was possible to check whether these bimolecular reactions as diffusion limited and to estimate independently distance parameter R' and mutual diffusion coefficient D. Finally an effort has been made to correlate the values of R'and D with the values of the encounter distance R and the mutual diffusion coefficient D determined using the Edwardis empirical relation and Stokes-Einstein relation.

• Steel and Composite Structures
• /
• v.48 no.6
• /
• pp.625-639
• /
• 2023

In this paper, a Taguchi-based finite element method (FEM) has been proposed and implemented to assess optimal design parameters for minimum static deflection in laminated composite plate. An orthodox mathematical model (based on higher-order shear deformation plate theory and Green-Lagrange geometrical nonlinearity) has been used to compute the nonlinear central deflection values of laminated composite plates according to Taguchi design of experiment via a self-developed MATLAB computer code. The lay-up scheme, aspect ratio, thickness ratio and the support conditions of the laminated composite plate structure were designated as the governable design parameters. Analysis of variance (ANOVA) is used to investigate the effect of diverse control factors on the nonlinear static responses. Moreover, regression model is developed for predicting the desired responses. The ANOVA revealed that the lay-up scheme alongside the support condition plays vital role in minimizing the central deflection values of laminated composite plate under uniformly distributed load. The conformity test results of Taguchi analysis are also in good agreement with the numerical experimentation results.

• The Journal of Korean Physical Therapy
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2006

Purpose: This study was performed to determine the difference or temporal-spatial gait asymmetry ratio according to static pelvic inclination level in hemiplegic patients. Methods: The subjects were 25 hemiplegic patients who was experienced stroke on MCA territory. Gait parameters and static pelvic inclination were recorded by $GAITRite^{(R)}$ system and radiologic PACS. The subjects were divided into three group according to static pelvic inclination. In the group I, the subjects have static pelvic inclination below $58^{\circ}$. The group II has $58^{\circ}{\sim}62^{\circ}$ or static pelvic inclination and the group m has over $62^{\circ}$ or static pelvic inclination. The data or three groups were analysed with ANOVA. Results: In comparison or single support time asymmetry ratio among 3 groups, the score or group II was significantly higher than the other groups(p<0.05). But the swing time asymmetry ratio was not significant(p>0.05). Conclusion: Asymmetry ratio of single support time was statistically significant by static pelvic inclination level. But asymmetry ratio or group II was the highest among three groups. It means that the patients or normal range of pelvic inclination was showed the most asymmetry or gait. And swing time asymmetry ratio was not significant among three groups. Even if the patient has normal ranged static pelvic inclination, it doesn't suggest that the patient has low gait asymmetry.

• Korean Journal of Computational Design and Engineering
• /
• v.16 no.3
• /
• pp.178-186
• /
• 2011

Static CAD models are the CAD models that do not have feature information and modeling history. These static models are generated by translating CAD models in a specific CAD system into neutral formats such as STEP and IGES. When a CAD model is translated into a neutral format, its precious feature information such as feature parameters and modeling history is lost. Once the feature information is lost, the advantage of feature based modeling is not valid any longer, and modification for the model is purely dependent on geometric and topological manipulations. However, the capabilities of the existing methods to modify static CAD models are limited, Direct modification methods such as tweaking can only handle the modifications that do not involve topological changes. There was also an approach to modify static CAD model by using volume decomposition. However, this approach was also limited to modifications of protrusion features. To address this problem, we extend the volume decomposition approach to handle not only protrusion features but also depression features in a static CAD model. This method first generates the model that contains the volume of depression feature using the bounding box of a static CAD model. The difference between the model and the bounding box is selectively decomposed into so called the feature volume and the base volume. A modification of depression feature is achieved by manipulating the feature volume of the static CAD model.

• Journal of the Korean Chemical Society
• /
• v.56 no.1
• /
• pp.20-27
• /
• 2012

Complex permittivity spectra of Allyl Chloride (AC), 2-Butanone (2-BU) and their binary mixtures over the entire range of concentration were obtained using the Time Domain Reflectometry (TDR) technique in microwave frequency range at various temperatures. Static dielectric constant and relaxation time are obtained from complex permittivity spectra. Density ($\rho$) and refractive index ($n_D$) are also measured. These parameters are used to determine excess dielectric constant, excess inverse relaxation time, excess molar volume, excess molar refraction, polarity, Bruggeman factor and thermodynamic parameters viz. enthalpy of activation and entropy of activation. The values of static dielectric constant and relaxation time increases while density and refractive index decreases with the percentage of 2-Butanone in Allyl Chloride increases. Excess parameters were fitted to a Redlich-Kister equation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.4
• /
• pp.172-178
• /
• 2003

This paper examines the application of high voltage static var compensator(SVC) with cascade multilevel inverter which employs H-bridge inverter(HBI). This method has the primary advantage that the number of voltage levels can be increased for a given number of semiconductor devices when compared to the conventional control methods. The SVC system is modeled using the d-q transform which calculates the instantaneous reactive power. This model is used to design a controller and analyze the SVC system. From the mathematical model of the system, the design procedures of the circuit parameters L and C are presented in this thesis. To meet the specific total harmonic distortion(THD) and ripple factor of the capacitor voltage, the circuit parameters L and C are designed. Simulated and experimental results are also presented and discussed to validate the proposed schemes.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.4
• /
• pp.607-612
• /
• 1994

The static and dynamic model of IGBT for the SPICE simulation has been successfully developed. The various circuit model parameters are extracted from the I-V and C-V characteristics of IGBT and implemented into our model. The static model of IGBT consists of the MOSFET, bipolar transistor and series resistance. The parameters to be extracted are the threshold voltage of MOSFET, current gain $\beta$ of bipolar transistor, and the series resistance. They can be extracted from the measured I-V characteristics curve. The C-V characteristics between the terminals are very important parameters to determine the turn-on and turn-off waveform. Especially, voltage dependent capacitance are polynomially approximated to obtain the exact turn-on and turn-off waveforms. The SPICE simulation results employing new model agree well with the experimental values.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.125-130
• /
• 2002

This paper examines the application of high voltage static var compensator(SVC) with cascade multilevel inverter which employs H~bridge inverter(HBI). The SVC system is modeled using the d-q transform which calculates the instantaneous reactive power. This model is used to design a controller and analyze the SVC system. From the mathematical model of the system, the design procedures of the circuit parameters Land C are presented in this thesis. To meet the specific total harmonic distortion(THD) and ripple factor of the capacitor voltage, the circuit parameters Land C are designed. Simulated and experimental results are also presented and discussed to validate the proposed schemes.