• 제목/요약/키워드: static measurements

검색결과 417건 처리시간 0.034초

외부 강재 보강으로 구성한 합성 부재의 휨 성능에 대한 실험 (Experiments on Flexural Performance of Composite Members Strengthened by External Steel Plates)

  • 황병훈;신진원;전재호;김윤용
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제26권5호
    • /
    • pp.143-150
    • /
    • 2022
  • 이 논문은 내진 성능 향상 목적으로 외부 강재로 보강한 콘크리트 부재의 휨 성능에 대한 실험적 연구이다. 구조물을 보강하기 위하여 벽과 기둥을 보강재로 감싸는 형식의 보강 방법을 적용하였는데, 이 구조물에서 가장 긴 지간을 갖는 벽체 일부 단면을 실물 크기로 제작하여 정적 재하 실험을 수행하는 방법으로 강성 보강효과를 확인하였다. 실험 결과, 보강 단면은 충분한 보강 성능을 발현하는 것을 확인하였으나, 가력기의 용량 부족과 안전상의 문제로 파괴까지의 거동을 확인하지는 못하였다. 보강재가 벽체에 작용하는 면외방향 모멘트를 효과적으로 부담하고 있는 것을 확인하였고, 측정된 변위와 철근 변형률 등의 분석을 통하여 보강 전 부재에 비하여 부재 강성과 휨모멘트 저항능력이 향상되었음을 검증하였다.

A Study on Ability of Cognitive Impairment According for Decreased Balance Function of Pneumoconiosis Patients

  • Tae Hoon Lee;Sang Seok Yeo
    • The Journal of Korean Physical Therapy
    • /
    • 제35권4호
    • /
    • pp.111-116
    • /
    • 2023
  • Purpose: Pneumoconiosis is a chronic lung disease in which the lungs become hardened due to the accumulation of fine mineral dust that has been breathed in at industrial sites. The lungs are unable to function properly, resulting in complications of several respiratory diseases. Methods: The subjects were 36 elderly adults (pneumoconiosis patients 18, healthy elderly 18) over the age of 65 years. The respiratory function was assessed using a spirometer to measure forced vital capacity (FVC), first second of forced expiration (FEV1), FEV1/FVC, and peak expiratory flow n(PEF). The static balance function test was determined by the center of mass (COM), ankle angle range, hip angle range, sway parameters, and reciprocal compensatory index (RCI). Cognitive function was measured by applying MoCA-k. Results: Comparison of respiration functions between the two groups showed statistically significant differences in FVC, FEV1, FEV1/FVC, and PEFs (p<0.05). Cognitive abilities showed statistically significant differences due to higher cognitive skills in the control group as compared to the patient group (p<0.05). Most results of the static balance capability measurements showed statistically significant differences between the groups (p<0.05). However, no statistically significant differences were obtained for COM AP Range, Angle AP Range, RCI ML Range, and AP Range (p>0.05). Conclusion: The results of the current study indicate that patients suffering from pneumoconiosis have less cognitive ability and balance function as compared to healthy elderly people. Therefore, we expect an improvement in the balance ability and cognitive function through systematic management and strengthening lung function training to improve the quality of life of pneumoconiosis patients.

UBCSAND모델을 이용한 사면의 동적거동해석 (Numerical Modeling of Sloping Ground under Earthquake Loading Using UBCSAND Model)

  • 박성식;김영수;김희중
    • 한국지반공학회논문집
    • /
    • 제22권4호
    • /
    • pp.61-71
    • /
    • 2006
  • 본 논문에서는 유효응력모델을 이용하여 포화된 사면의 동적거동에 관한 연구를 수행하였다. 수치해석에는 저자가 개발한 연성 유효응력모델인 UBSSAND모델을 이용하였으며, 이 모델은 초기전단응력이 수평면에 작용하는 경우와 작용하지 않는 경우를 포함한 반복 직접단순전단시험 자료를 이용하여 검증하였다. 검증된 모델은 느슨한 Fraser River 모래로 성형된 사면을 가진 원심모형모델의 동적거동을 예측하였다. 예측된 과잉간극수압, 가속도 및 변위를 계측치와 서로 비교하였으며, 예측치와 계측치는 비교적 서로 잘 일치하였다. 전단응력도의 응력전환형태는 초기전단응력과 반복전단응력의 크기에 따라 달라지며, 이는 지진시 포화된 사면의 안정해석에 아주 중요한 역할을 하고 있음을 알 수 있었다. 전단응력도의 응력전환이 발생하지 않을 경우에 사면근처의 모래는 낮은 유효응력 구속압과 그에 따른 팽창성으로(부의 과잉간극수압발생) 유효응력이 증가하여, 동적하중 하의 사면의 변위를 저지하였다. 이와 같은 유효응력모델은 액상화를 고려한 지반구조물의 내진해석에 유용하게 사용될 수 있다.

초고강도 원심성형 각형보를 상부구조로 하는 라멘교의 내하성능 평가 (Evaluation of the Load Carrying Capacity on a Rahmen Bridge with Ultra-high Strength Centrifugally Formed Square Beams as the Superstructure )

  • 이두성;김성진;김정회
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제28권1호
    • /
    • pp.61-69
    • /
    • 2024
  • 고가의 혼화재 투입 없이 원심성형 공정 활용으로 콘크리트의 수밀성 증대를 통한 콘크리트 압축강도가 100MPa급인 초고강도 프리스트레스 각형보를 개발하였다. 피암터널 상부구조로 개발된 원심성형 각형보를 지역 소하천의 라멘교에 시공하였으며, 본 연구에서는 정적재하시험을 통하여 계측한 결과와 대상 구조물의 수치해석 결과를 바탕으로 비교, 분석하여 원심성형 각형보 라멘교의 공용내하력과 안전성을 평가하였다. 본 교량의 정·동적 재하시험과 수치해석 결과가 유사하게 나타났으며 원심성형 각형보의 거동을 잘 모사하는 것으로 확인되었다. 합성 라멘교를 구성하는 모든 원심성형 각형보는 설계활하중 하에서 충분한 내하력을 확보하는 것으로 평가되었고 안전성을 확보하여 구조적인 신뢰성을 입증하였다.

Kinetic Investigation of CO2 Reforming of CH4 over Ni Catalyst Deposited on Silicon Wafer Using Photoacoustic Spectroscopy

  • Yang, Jin-Hyuck;Kim, Ji-Woong;Cho, Young-Gil;Ju, Hong-Lyoul;Lee, Sung-Han;Choi, Joong-Gill
    • Bulletin of the Korean Chemical Society
    • /
    • 제31권5호
    • /
    • pp.1295-1300
    • /
    • 2010
  • The $CO_2-CH_4$ reaction catalyzed by Ni/silicon wafers was kinetically studied by using a photoacoustic technique. The catalytic reaction was performed at various partial pressures of $CO_2$ and $CH_4$ (50 Torr total pressure of $CO_2/CH_4/N_2$) in the temperature range of 500 - $650^{\circ}C$ in a static reactor system. The photoacoustic signal that varied with the $CO_2$ concentration during the catalytic reaction was recorded as a function of time. Under the reaction conditions, the $CO_2$ photoacoustic measurements showed the as-prepared Ni thin film sample to be inactive for the reaction, while the $CO_2/CH_4$ reactions carried out in the presence of the sample pre-treated in $H_2$ at $600^{\circ}C$ were associated with significant time-dependent changes in the $CO_2$ photoacoustic signal. The rate of $CO_2$ disappearance was measured from the $CO_2$ photoacoustic signal data in the early reaction period of 50 - 150 sec to obtain precise kinetic data. The apparent activation energy for $CO_2$ consumption was determined to be 6.9 kcal/mol from the $CO_2$ disappearance rates. The partial reaction orders, determined from the $CO_2$ disappearance rates measured at various $PCO{_2}'S$ and $PCH{_4}'S$ at $600^{\circ}C$, were determined to be 0.33 for $CH_4$ and 0.63 for $CO_2$, respectively. Kinetic data obtained in these measurements were compared with previous works and were discussed to construct a catalytic reaction mechanism for the $CO_2-CH_4$ reaction over Ni/silicon wafer at low pressures.

연료 과농 가스발생기의 연소 가스 물성치에 관한 연구 (Study on Combustion Gas Properties of a Fuel-Rich Gas Generator)

  • 서성현;최환석;한영민;김성구
    • 한국항공우주학회지
    • /
    • 제34권10호
    • /
    • pp.56-60
    • /
    • 2006
  • 액체 로켓 엔진용 가스발생기 개발을 위해서는 추진제 O/F ratio에 따른 연소 가스의 열역학적 물성치 예측이 필수적이다. 본 연구에서는 액체산소/Jet A-1 조합의 연료 과농 가스발생기의 실 추진제 연소 시험을 통해 O/F ratio 변화에 따른 연소 생성 가스의 온도를 계측하였다. 또한 연소실 내 동압 섭동 측정 및 정압 측정 결과를 이용하여 비열비, 가스 상수, 정압 비열과 같은 연소 가스의 열역학적 물성치를 간접적으로 산출해내었다. 본 실험값은 화학평형코드 결과를 통해 구한 보간 계수를 이용한 예측 결과와 비교해보았을 때 동일한 경향 및 유사한 값을 가지는 것으로 밝혀졌으며 이는 보간 계수 예측 방법이 설계 도구로 충분히 적용 가능하다는 결과를 확인하였다.

On the NiTi wires in dampers for stayed cables

  • Torra, Vicenc;Carreras, Guillem;Casciati, Sara;Terriault, Patrick
    • Smart Structures and Systems
    • /
    • 제13권3호
    • /
    • pp.353-374
    • /
    • 2014
  • Recent studies were dedicated to the realization of measurements on stay-cable samples of different geometry and static conditions as available at several facilities. The elaboration of the acquired data showed a a satisfactory efficacy of the dampers made of NiTi wires in smoothing the cable oscillations. A further attempt to investigate the applicability of the achieved results beyond the specific case-studies represented by the tested cable-stayed samples is herein pursued. Comparative studies are carried out by varying the diameter of the NiTi wire so that similar measurements can be taken also from laboratory steel cables of reduced size. Details of the preparation of the Ni-Ti wires are discussed with particular attention being paid to the suppression of the creep phenomenon. The resulting shape of the hysteretic cycle differs according to the wire diameter, which affects the order of the fitting polynomial to be used when trying to retrieve the experimental results by numerical analyses. For a NiTi wire of given diameter, an estimate of the amount of dissipated energy per cycle is given at low levels of maximum strain, which correspond to a fatigue fracture life of the order of millions of cycles. The dissipative capability is affected by both the temperature and the cycling frequency at which the tests are performed. Such effects are quantified and an ageing process is proposed in order to extend the working temperature range of the damper to cold weathers typical of the winter season in Northern Europe and Canada. A procedure for the simulation of the shape memory alloy behavior in lengthy cables by finite element analysis is eventually outlined.

지하수에 용해된 질소, 아르곤 가스의 동시측정 (Simultaneous Determiniation of Ar/$N_2$Ratios in Groundwater)

  • Kim, Euisik;Roy F. Spalding
    • 대한지하수환경학회지
    • /
    • 제1권1호
    • /
    • pp.6-9
    • /
    • 1994
  • 지하수의 Ar/$N_2$가스의 비율은 탈질화(denitrification)의 정도를 측정하는 하나의 방법으로 사용된다. (Barnes et al., 1975; Vogel et al., 1981; Mariotti et al., 1988) 그 비율 측정은 일반적으로 질량분석기 (Mass Spectrometer)를 사용한다. 본 실험에서 사용한 Mass Spectrometer는 일반적인 Static Mass Spectrometer가 아닌 Ar과 $N_2$을 시간적으로 동시에 측정하여 오차를 줄일 수 있는 VG Optima isotope ratio Mass Spectrometer를 사용하였다. 두 지역 지하수의 Ar/$N_2$가스의 비율을 측정한 결과 Site 1(Grand Island, NE)의 경우 대기가스가 포화된 증류수의 Ar/$N_2$가스 비율인 0.026보다 낮은 0.015-0.018로서 탈질이 일어났음을 알 수 있으며, Site 2(Shelton, NE)의 경우 0.023-0.02로서 탈질이 일어나지 않음을 알 수 있다. 본 실험의 목적은 지하수에 응해되어 있는 Ar/Nitrogen의 비율을 정확히 측정하는 방법을 개발하므로서 탈질의 정도를 정확히 측정하며 탈질의 전개 과정을 관찰하기 위한 것이다.

  • PDF

유체기계 덕트 내 시변 음원의 음향 특성에 관한 연구 (An Analysis of the Acoustical Source Characteristics in the Time-varying Fluid Machines)

  • 장승호;이준신;이정권
    • 한국음향학회지
    • /
    • 제22권2호
    • /
    • pp.104-112
    • /
    • 2003
  • 유체기계 덕트 내 음원은 흔히 선형 시불변 모델을 이용하여 음원 임피던스와 강도로 특성화되어진다. 그러나 내연기관 및 압축기 음원에 대한 여러 측정에서 물리적으로 타당하지 않은 부의 저항이 보고된 바 있다. 본 논문에서는 유체기계의 시변성이 음원특성에 미치는 영향에 대하여 해석적으로 연구하였다. 이를 위하여 왕복동 피스톤 및 배기계로 구성된 간단한 유체기계를 전형적인 주기적으로 시변하는 계로서 다루었으며 등가음향 회로를 해석하였다. 해석 해를 이용한 모사측정에서는 실제 음원의 시변성이 부의 저항에 대한 주요한 원인임을 볼 수 있다. 비교적 작은 시변항의 크기를 가지는 경우에 피스톤이 정적 계의 고유진동수의 두 배 또는 그 정수로 나뉜 주파수로 작동한다면 음원이 큰 음향 파워를 방사하게 됨을 알 수 있다.

스마트 마이크로그리드 실시간 상태 추정에 관한 연구 (A Study on Real-time State Estimation for Smart Microgrids)

  • 배준형;이상우;박태준;이동하;강진규
    • 한국태양에너지학회:학술대회논문집
    • /
    • 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
    • /
    • pp.419-424
    • /
    • 2012
  • This paper discusses the state-of-the-art techniques in real-time state estimation for the Smart Microgrids. The most popular method used in traditional power system state estimation is a Weighted Least Square(WLS) algorithm which is based on Maximum Likelihood(ML) estimation under the assumption of static system state being a set of deterministic variables. In this paper, we present a survey of dynamic state estimation techniques for Smart Microgrids based on Belief Propagation (BP) when the system state is a set of stochastic variables. The measurements are often too sparse to fulfill the system observability in the distribution network of microgrids. The BP algorithm calculates posterior distributions of the state variables for real-time sparse measurements. Smart Microgrids are modeled as a factor graph suitable for characterizing the linear correlations among the state variables. The state estimator performs the BP algorithm on the factor graph based the stochastic model. The factor graph model can integrate new models for solar and wind correlation. It provides the Smart Microgrids with a way of integrating the distributed renewable energy generation. Our study on Smart Microgrid state estimation can be extended to the estimation of unbalanced three phase distribution systems as well as the optimal placement of smart meters.

  • PDF