• 한국화재소방학회논문지
• /
• 제1권1호
• /
• pp.19-26
• /
• 1987

In this study, fire resistance of steel fiber reinforced concrete was investigated Cylindrical and prismatic specimens made of Ordinary Portland Cement plain concrete and steel fiber reinforced concrete were exposed to heating in accordance with a standard time-temperature curve as specified in KS·F22 57, method of fire resistance test for structural parts of buildings, the period of heating was 1 hour and 2 hours. After the fire resistance test, mechanical properties of specimens such as compressive and bending strength, stress-strain curve, static and dynamic modulus of elasticity and bending toughness were investigated. Also the cracks and spallings of the specimens were observed. From the test results, it was confirmed that steel fiber reinforced concrete has a excellent fire resistance than plain concrete in the view of higher residual strength of concrete and smaller crackings because of steel fibers in concrete.

• 대한기계학회논문집A
• /
• 제34권1호
• /
• pp.55-60
• /
• 2010

틸팅형 고속열차의 차체에 적용되는 하니컴 복합재 조인트 구조물의 경우 운행중 외팔보형 굽힘하중을 받게된다. 하이브리드 복합재 조인트 구조물에 대한 굽힘시험평가를 수행하기 위해 실제 틸팅열차 차체 구조물에서 조인트부를 절단 채취하여 시험편으로 제작하였다. 굽힘시험결과 시험편의 파괴거동은 정적하중과 피로하중하에서 확연히 달라짐을 보였다. 정적굽힘하중 하에서는 하니컴 코어 영역에서 전단변형과 파괴가 발생하였으며, 피로굽힘하중 하에서는 복합재 표피층과 하니컴 코어층 사이에서 계면분리가 발생하거나, 또는 금속재 언더프레임과의 용접부에서 파괴가 발생하였다. 이러한 파괴거동은 다른 산업분야에서 사용되는 유사한 구조의 하니컴 복합재 조인트 구조물에서도 발생할 수 있기 때문에, 본 실험 결과를 하니컴 복합재 조인트 구조물의 설계변수를 개선하기 위해 이용될 수 있다.

• 대한의용생체공학회:의공학회지
• /
• 제23권1호
• /
• pp.17-26
• /
• 2002

본 연구의 목적은 척추 내고정 시스템인 척추경 나사못의 기계적 특성 평가를 통하여 내고정 시스템에 영향을 미치는 주요 하중요소를 규명하고. 하중요소에 대한 정하중 평가와 단분절 시스템(one bevel system)에서의 피로수명을 증가시키는 방법을 제안하는 것이다. 정하중 시험에서 단일 척추경 나사못(single pedicle strew)에 작용하는 하중요소는 마찰력((friction force), 굽힘력(bending force), 결합력(holding force)으로 나타났으며, 단일 나사못의 굽힘력 시험결과로부터 단분절 시스템에 대한 시험결과의 유추가 가능하였다 척추 내고정 시스템의 상부 부분 시험의 피로수명 보다는 봉(rod)의 유연성을 포함하는 단분절 시스템에서의 피로수명이 길게 나타났고. 인체에 삽입되는 척추경 나사못 단분절 시스템에서 근육 및 ligament 등에 의해서 봉의 유연성 저하를 가져올 수 있음을 고려할 때. 단일 나사못 피로시험만으로 단분절 시스템의 피로수명 예측이 가능함을 보였다.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.147-155
• /
• 1996

The purpose of present paper is to estimate the static and fatigue bending strengths of CFRP(carbon fiber reinforced plastic) laminates having impact damage(FOD). The specimens which are formed with the different stacking composition, EPOXY and PEEK matirx and orthotropic and quasi-isotropic laminated plates, are prepared for this experiment. A steel ball is impacted on CFRP laminates, generating impact damages, and the three-point fatigue bending test is carried out by using the impacted laminates to investigate the influence of the stackin composition on the fatigue strength of CFRP laminates.

• Advanced Composite Materials
• /
• 제17권3호
• /
• pp.215-224
• /
• 2008

The present study aims to design a multilayer microstrip antenna with composite sandwich construction and investigate fatigue behavior of this multilayer SAS (surface antenna structure) that was asymmetric sandwich structure for the next generation of structural surface technology. This term, SAS, indicates that the structural surface becomes an antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, antenna elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.2 GHz. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of the SAS was obtained. The experimental results of bending fatigue were compared with single load level fatigue life prediction equations and in good agreement. The SAS concept is can be extended to give a useful guide for manufacturers of structural body panels as well as antenna designers.

• 한국철도학회논문집
• /
• 제9권2호
• /
• pp.151-159
• /
• 2006

It analyzed the mechanical behaviors of non-ballasted railway bridge (steel plate girder type) with ballast reinforced on the finite element analysis, field test and laboratory test far the static and dynamic responses. The major objective of this study is to investigate the effects and application of reinforcement for steel plate girder railway bridge by the external post-tensioning method. The reinforcement of non-ballast railway bridge had obviously stable dynamic behaviors due to the additional dead force which was ballast. But in case of static behaviors, static displacements and stresses had increased nearly the allowable values. Therefore we analyzed the mechanical behaviors of non-ballasted railway bridge with ballast reinforced and external post-tensioning reinforced on the finite element analysis and laboratory test for the static and dynamic behavior. As a result, the reinforcement of ballasted railway bridge the external post-tensioning method are obviously effective for the additional dead force which is ballast. The analytical and experimental study are carried out to investigate the post-tension force decrease bending behavior and deflection in composite bridge for serviceability. The servicing railway bridge with ballast reinforced has need of the reasonable reinforcement measures which could be reducing the effect of additional dead load that degradation phenomenon of structure by an unusual. stresses and a drop durability.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.282-285
• /
• 2006

This study is to examine bond strength of beam reinforced with GFRP rebar under 4-point bending test by adopting BRITISH STANDARD. The variables were made to have bonding length of 5times$(5d_b)$, 10times$(10d_b)$ and 15times$(15d_b)$ of the nominal diameter of GFRP rebar and were done to analyze the relationship between the bonding strength and the slip. In the result of the test, pull-out failure was dominant in the $5d_b$ and $10d_b$ specimen, both patterns of the pull-out failure and concrete splitting failure appeared in the $10d_b$. On the other hand, the $15d_b$ specimen showed only concrete splitting failure at the end of bonding length. Therefore, it was prove that available bonding length of the GFRP rebar under bending condition on static test is over $15d_b$ then farther research such as fatigue bending test, development of bonding model, FEM parameter study should be performed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.81-88
• /
• 2005

In soft grounds with deep bearing stratum, the PHC piles are generally joined by welding or prefabricated method. However, the existing joining methods have some problems in a side view of workability, quality and cost etc. In this study, a new joining method of PHC piles, which removes the problems of the existing methods, is developed. Static and dynamic load tests in fields as well as laboratory tests such as tensile and bending tests are conducted to investigate the workability and structural safety of PHC piles joined by the new method. The test results show that tensile and bending resistances of the joint part are higher than those of PHC pile itself. PHC piles with 400mm diameter are joined by the new method within 4 minutes while 25 minutes for welding method. Bearing capacities of the PHC piles joined by the new method are nearly the same as those of jointed PHC piles by welding method.

• Journal of Welding and Joining
• /
• 제16권2호
• /
• pp.84-92
• /
• 1998

On this study, the variations of hardness and microstructure were observed at he spot-welded part of 5182 alminum alloy sheets with thickness of 1.2 mm. The hardness of spot-welded part of aluminum alloy indicated the lowest value at nugget center. Also, the position where fatigue crack exists was investigated by surveying microstructure of the spot-welded sections. Mean load-deformation diagrams were obtained from static tensile test. Fracture was occurred completely within 5 mm after transforming elastic into plastic area. Fatigue test was stopped when the specimens of fatigue test had the final displacement of 0.2mm and measured fatigue bending angle and crack length. This study utilized them, investigated the relations between fatigue bending angle and fatigue crack length and made a estimation of the fatigue fracture life of resistance spot welded part of 5182 aluminum alloy sheet. The relative equation o fatigue crack length and fatigue failure life can be represented by {TEX}$L_{C}${/TEX}=α{TEX}$N_{f}^ {β}${/TEX}.

• 한국철도학회논문집
• /
• 제15권5호
• /
• pp.423-428
• /
• 2012

철도차량의 속도가 증가함에 따라 레일 불균일에 의한 가진주파수의 상승으로 인하여 철도차량의 동특성을 고려한 승차감 예측기술이 중요해지고 있다. 철도차량의 동특성은 전산 모드해석과 더불어 시험적으로 검증되어야 한다. 본 연구에서는 철도차량 차체 굽힘모드 시험을 고찰하고, 이를 대체할 수 있는 방안을 제시하였다. 이를 위해 우선 차체 크기비를 반영한 평판 시편을 제적하고, 이를 기존 시험규격인 JIS E7105방법과 충격시험을 사용한 결과를 비교하여 충격시험의 타당성을 검증하였다. 또한 전산해석을 통하여 이를 재현하였다. 타당성이 검증된 결과를 바탕으로 현장 굽힘모드 시험을 유압가진 대신 충격시험으로 대체 가능성을 검토하였다.