• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.99-105
• /
• 2005

초고온($2700^{\circ}C$) 연소가스에 직접 노출된 상태에서 가스유동에 의한 동압을 받는 추력편향장치용 제트 베인의 열구조 안전성을 평가하기 위하여 내열합금의 초고온 인장시험 및 3차원 비선형 수치해석을 수행하였다. 고온 구조거동을 분석하여 제트 베인의 구조안전성을 평가하였으며 구조해석결과를 지상연소시험결과와 비교하였다. 구조 및 열 하중의 대부분은 제트 베인 축에 집중되었으며, 축은 $1400^{\circ}C$ 이하에서 구조적으로 안전한 것으로 밝혀졌다. 지상연소시험결과와 구조해석결과의 비교를 통하여 베인 하중과 축의 변위를 기준으로 구조안전계수를 평가하는 것이 등가응력에 의한 평가 기준보다 더 유용한 기준으로 판단되었다.

• 한국추진공학회지
• /
• 제9권3호
• /
• pp.18-24
• /
• 2005

초고온(2700$^{\circ}C$ ) 연소가스에 직접 노출된 상태에서 가스유동에 의한 동압을 받는 추력편향장치용 제트 베인의 열구조 안전성을 평가하기 위하여 내열합금의 초고온 인장시험 및 3차원 비선형 수치해석을 수행하였다. 고온 구조거동을 분석하여 제트 베인의 구조안전성을 평가하였으며 구조해석결과를 지상 연소시험결과와 비교하였다. 구조 및 열 하중의 대부분은 제트 베인 축에 집중되었으며, 축은 1400$^{\circ}C$ 이하에서 구조적으로 안전한 것으로 밝혀졌다. 지상연소시험결과와 구조해석결과의 비교를 통하여 베인 하중과 축의 변위를 기준으로 구조안전계수를 평가하는 것이 등가응력에 의한 평가기준보다 더 유용한 기준으로 판단되었다.

• 연구논문집
• /
• 통권27호
• /
• pp.57-73
• /
• 1997

The bogie between the track and the railway vehicle body, is one of the most important component in railroad vehicle. Its effects on the safety of both passengers and vehicle itself, and on the overall performance of the vehicle such as riding quality, noise and vibration are critical. The bogie is mainly consisted of the bogie frame, suspensions, wheels and axles, braking system, and transmission system. The complex shapes of the bogie frame and the complicate loading condition (both static and dynamic) induced in real operation make it difficult to design the bogie frame fulfilling all the requirements. The complicated loads applied to the bogie frame are i) static load due to the weight of the vehicle and passengers, ii) quasi-static load due to the rolling in curves iii) dynamic load due to the relative motion between the track, bogie, and vehicle body. In designing the real bogie frame, fatigue analysis based on the above complicated loading conditions is a must. In this study, stress analysis of the bogie frame has been performed for the various loading conditions according to the UIC Code 6 15-4. Magnitudes of the stress amplitude and mean stress were estimated based on the stress analysis results to simulate the operating loads encountered in service. Fatigue strength of the bogie frame was evaluated by using the constant life diagram of the material. 3-D surface modelling, finite element meshing, and finite element analysis were performed by Pro-Engineer, MSC/PATRAN, and MSC/NASTRAN, respectively.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.341-363
• /
• 2012

The spectral representation method is a quick and versatile tool for the generation of spatially variable, response-spectrum-compatible simulations to be used in the nonlinear seismic response evaluation of extended structures, such as bridges. However, just as recorded data, these simulated accelerations require processing, but, unlike recorded data, the reasons for their processing are purely numerical. Hence, the criteria for the processing of acceleration simulations need to be tied to the effect of processing on the structural response. This paper presents a framework for processing acceleration simulations that is based on seismological approaches for processing recorded data, but establishes the corner frequency of the high-pass filter by minimizing the effect of processing on the response of the structural system, for the response evaluation of which the ground motions were generated. The proposed two-step criterion selects the filter corner frequency by considering both the dynamic and the pseudo-static response of the systems. First, it ensures that the linear/nonlinear dynamic structural response induced by the processed simulations captures the characteristics of the system's dynamic response caused by the unprocessed simulations, the frequency content of which is fully compatible with the target response spectrum. Second, it examines the adequacy of the selected estimate for the filter corner frequency by evaluating the pseudo-static response of the system subjected to spatially variable excitations. It is noted that the first step of this two-fold criterion suffices for the establishment of the corner frequency for the processing of acceleration time series generated at a single ground-surface location to be used in the seismic response evaluation of, e.g. a building structure. Furthermore, the concept also applies for the processing of acceleration time series generated by means of any approach that does not provide physical considerations for the selection of the corner frequency of the high-pass filter.

• 한국자동차공학회논문집
• /
• 제6권5호
• /
• pp.146-152
• /
• 1998

Recently, for the development of vehicle structures and components there is a tendency to increase using numerical simulation methods compared with practical tests for the estimation of the fatigue strength. In this study, an integrated powerful methodology is suggested for fatigue strength evaluation through development of the interface program to integrate dynamic analysis quasi-static stress analysis and fatigue analysis, which were so far used independently. To verify the presented evaluation method, a single and zigzag bump run test, 4-post road load simulation and driving durability test have been performed. The prediction results show a good agreement between analysis and test. This research indicates that the integrated life prediction methodology can be used as a reliable design tool in the pre-prototype and prototype development stage, to reduce the expense and time of design iteration.

• Earthquakes and Structures
• /
• 제14권6호
• /
• pp.505-523
• /
• 2018

Static pushover analyses of typical existing reinforced concrete frames, designed according to the previous generations of design codes in Greece, have established these structures' inelastic characteristics, namely overstrength, global ductility capacity and available behaviour factor q, under planar response. These were compared with the corresponding demands at the collapse limit state target performance point. The building stock considered accounted for the typical variability, among different generations of constructed buildings in Greece, in the form, the seismic design code in effect and the material characteristics. These static pushover analyses are extended, in the present study, in the time history domain. Consequently, the static analysis predictions are compared with Incremental Dynamic Analysis results herein, using a large number of spectrum compatible recorded base excitations of recent destructive earthquakes in Greece and abroad, following, for comparison, similar conventional limiting failure criteria as before. It is shown that the buildings constructed in the 70s exhibit the least desirable behaviour, followed by the buildings constructed in the 60s. As the seismic codes evolved, there is a notable improvement for buildings of the 80s, when the seismic code introduced end member confinement and the requirement for a joint capacity criterion. Finally, buildings of the 90s, designed to modern codes exhibit an exceptionally good performance, as expected by the compliance of this code to currently enforced seismic provisions worldwide.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.559-560
• /
• 2009

본 연구는 2차 긴장재를 비부착시킨 PSC거더 교량의 거더높이가 일반 PSC거더 교량보다 낮음에 따라 정 동적 차량재하시험과 구조검토를 수행하여 내하력을 평가함으로서 대상교량의 건전성 평가를 수행하였다.

• 정보과학회 논문지
• /
• 제44권10호
• /
• pp.1081-1086
• /
• 2017

대규모 공개 소스 소프트웨어 저장소를 대상으로 프로그램 분석을 수행하면, 각 저장소의 소프트웨어의 변화 과정을 살펴볼 수 있고, 방대한 양의 프로그램을 분석함으로써 신뢰도가 높은 분석 결과를 얻을 수 있다는 점에서 의의가 있다. 본 논문에서는 대규모 소프트웨어 저장소를 대상으로 확장 가능하게 정적 프로그램 분석을 수행할 수 있는 프레임워크인 WALABOA를 소개한다. 나아가, 정적 분석 결과인 정적 함수 호출 그래프와 동적 분석 결과인 동적 함수 호출 그래프를 비교하는 모듈을 WALABOA에 추가하여, 자바스크립트 분석기 WALA에서 제공하는 분석 기법 중 하나인 필드 기반 분석(field-based analysis) 결과를 평가하는 데 활용하였다.

• 대한물리의학회지
• /
• 제6권2호
• /
• pp.235-246
• /
• 2011

Purpose: The aim of this study is to compare and assess the effects of lumbar stabilization exercise on the balance ability of young college studets with low back pain after having performed spinal stabilization exercise by using 3-dimensional air-balance system and gym ball. Methods: The subjects of this study were 34 low back patients in their early twenties. They were divided into two groups: 3-dimensional lumbar stabilization exercise group(N=17) and gym ball lumbar stabilization exercise group(N=17). The period of the intervention was for five weeks. VAS(Visual Analogue Scale) for pain test, ODI(Oswestry Disability Index) for ADL limitation test, Tetrax system for static balance test, and Air-balance system 3D for dynamic balance test were used as evaluation tools for this study. Results: Pain showed significant decrease in both groups after having performed the experiment, but ADL limitation of the groups did not show any remarkable difference between before and after the experiment. Dynamic balance ability in the 8-directional angle comparison test significantly increased in all directions except for the backward, left-backward, and right-backward directions. As for dynamic balance ability in the 8-directional postural test, 3D exercise group showed statistically significant reduction in every direction while gym ball exercise group did not(p<.05). However, when it comes to static balance ability in the weight distribution and stability test, there was not significantly change between pre and post test in both groups. Conclusion: This study shows 3-dimensional lumbar stabilization exercise is more effective in the lumbar stabilization of coordinated movement than gym ball exercise, which may imply that 3D air-balance system can be used for the therapeutic treatment of body imbalance for patients with low back pain.

• Steel and Composite Structures
• /
• 제46권5호
• /
• pp.621-635
• /
• 2023

The combination of replaceable and repairable properties in structures has introduced new approach called "Low Damage Design Structures". These structural systems are designed in such a way that through self-centering, primary members and specific connections neither suffer damage nor experience permanent deformations after being exposed to severe earthquakes. The purpose of this study is the seismic assessment of steel moment resisting frames with the aid of rigid rocking cores. To this end, three steel moment resisting frames of 4-, 8-, and 12-story buildings with and without rocking cores were developed. The nonlinear static analysis and incremental dynamic analysis were performed by considering the effects of the vertical and horizontal components of 16 strong ground motions, including far-fault and near-fault arrays. The results reveal that rocking systems benefit from better seismic performance and energy dissipation compared to moment resisting frames and thus structures experience a lower level of damage under higher intensity measures. The analyses show that the interstory drift in structures equipped with stiff rocking cores is more uniform in static and dynamic analyses. A uniform interstory drift distribution leads to a uniform distribution of the bending moment and a reduction in the structure's total weight and future maintenance costs.