• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.960-961
• /
• 2006

In this paper, a static var compensator using three phase PWM Watkins-Johnson AC-AC converter is presented. The PWM Watkins-Johnson AC-AC converter is modelled by using circuit DQ transformation whereby the basic DC characteristics equation is analytically obtained. Finally, the PSIM simulation shows the validity of the modelling and analysis.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.99-106
• /
• 2019

This paper propose a new form of UPQC (Unified Power Quality Compensator) to compensate the current and voltage quality problems of nonlinear loads. The conventional UPQC system consists of a series inverter, a parallel inverter, and a common DC link. A new type of UPQC proposed is a parallel compensator with SVC (Static Var Compensator) added to compensate for the wide compensation range and low DC link voltage. The parallel inverter compensates the reactive power generated by the nonlinear load, and the series inverter compensates the sag and swell generated at the power supply side.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.742-753
• /
• 2014

In this paper, a new continuously and linearly controlled capacitive static VAR compensator is proposed for the automatic power factor correction of inductive single phase loads in 220V 50Hz power system networks. The compensator is constructed of a harmonic-suppressed TCR equipped with a new adaptive current controller. The harmonic-suppressed TCR is a new configuration that includes a thyristor controlled reactor (TCR) shunted by a passive third harmonic filter. In addition, the parallel configuration is connected to an AC source via a series first harmonic filter. The harmonic-suppressed TCR is designed so that negligible harmonic current components are injected into the AC source. The compensator is equipped with a new adaptive closed loop current controller, which responds linearly to reactive current demands. The no load operating losses of this compensator are negligible when compared to its capacitive reactive current rating. The proposed system is validated on PSpice which is very close in terms of performance to real hardware.

• Journal of the Korean Solar Energy Society
• /
• v.35 no.3
• /
• pp.49-56
• /
• 2015

This paper presents a comparative operating characteristics of static var compensator(SVC) and static synchronous compensator(STATCOM) for compensating the reactive power in the Jeju power system. There are two kinds of reactive power compensating systems, which are active and passive system in the applications of the line commutated converter type high voltage direct current (LCC-HVDC). In the Jeju power system, two STATCOMs as active compensating system have been operating. Even though STATCOM has good performance compared with SVC, economical efficiency of former system is not good to the latter system. So, it is necessary to examine the performance and economical efficiency depend on the intention before appling the system. To compare the operating characteristics of two systems in the Jeju power system, simulations have been carried out for case studies that both of the HVDC system have transient state by using PSCAD/EMTDC program.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.532-535
• /
• 2003

In this paper, a Pl controlled feedback closed-loop voltage regulation scheme of the three-phase squirrel cage rotor self-excited induction generator (SEIG) driven by a variable-speed prime mover (VSPM) such as a wind turbine is designed on the basis of the static VAR compensator (SVC) and discussed in experiment fer the promising stand-alone power independent conditioner. The simulation and experimental results of the three-phase SEIG with the simple SVC controller for its stabilized voltage regulation prove the practical effectiveness of the additional SVC control loop scheme including the PI controller with fast response characteristics and steady-sate performance improvement.

• Journal of Power Electronics
• /
• v.3 no.3
• /
• pp.185-196
• /
• 2003

In this paper, the single-phase static VAR compensator (SVC) is applied to regulate and stabilize the generated terminal voltage of the single-phase self-excited induction generator (single-phase SEIG) driven by a variable-speed prime mover (VSPM) under the conditions of the independent inductive load variations and the prime mover speed changes The conventional fixed gain PI controller-based feedback control scheme is employed to adjust the equivalent capacitance of the single-phase SVC composed of the fixed excitation capacitor FC in parallel with the thyristor switched capacitor TSC and the thyristor controlled reactor TCR The feedback closed-loop terminal voltage responses in the single-phase SEIG coupled by a VSPM with different inductive passive load disturbances using the single-phase SVC with the PI controller are considered and discussed herem. A VSPM coupled the single-phase SEIG prototype setup is established. Its experimental results are illustrated as compared with its simulation ones and give good agreements with the digital simulation results for the single-phase SEIG driven by a VSPM, which is based on the SVC voltage regulation feedback control scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.7
• /
• pp.1187-1193
• /
• 2010

This paper provides the methods for enhancing the stability with normal or emergency operating conditions in real power systems and copes with the unbalance of demand of reactive power due to the loss of facility, such as 765kV transmission line. In this paper, we focused on the maximum allowable transmission power(hereafter, MAXTP) in the metropolitan area. In order to increase the MAXTP, the application of reactive power compensators, SVC, and Shunt compensator and reactor, is analyzed as an enhancing method of stability and MAXTP. Particularly, the f-V analysis was performed for the postulated contingency, in order to evaluate the effects on SVC. Conclusively, the stability of power systems could be enhanced and the MAXTP is increased effectively with Dongseoul SVC which has the capacity 200MVAr.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.767-769
• /
• 1993

A multilevel PWM voltage source inverter, especially five-level one, is introduced to obtain a static var compensator(SVC) as a large scale power, source. In this paper, the three phase SVC is modeled using circuit DQ transformation and completely analyzed. Finally, through the experimental results from 5-kVA SVC, the validity of the analyses and the feasibility of the SVC system are shown for high power applications.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.618-621
• /
• 2002

This paper proposes a static vu compensator using hybrid cascade 5-level PWM inverter, Circuit DQ transformation is used for modeling and analysis of the system, and it reveals the important characteristics and related equations of the system. Also, a multilevel PWM technique suitable to hybrid structure Is proposed for less harmonics in the input currents of the system. Finally, the validity of tile characteristics analysis is shown through PSIM simulations.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.211-212
• /
• 2015

전압 안정도를 향상 시키고 무효전력을 보상하는 방법 중 하나로 정지형 무효전력보상설비(SVC, Static Var Compensator)를 사용한다. 특히, 전기로(EAF, Electric Arc Furnace) 등 비선형 부하가 주를 이루는 철강 민수 사업자의 부하는 단시간 내에 전류 변화가 급격히 일어나며 큰 전압 변동을 일으키므로 무효전력 보상설비를 적용하여 안정적인 전력을 공급하고 전력 품질을 확보해야 할 필요가 있다. 본 논문에서는 LS-Nikko 동제련 온산 공장에 역률 보상을 목적으로 무효전력을 제어하기 위한 ${\pm}100[MVar]$ SVC 시스템 모델을 소개하고, 그 특성에 대한 이해를 돕고자 한다.