• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.373-375
• /
• 2004

The SRM is more robust and lower cost than other type motors. The inverter for SRM cannot have shoot through fault, since a phase winding of SRM is independent of other phase windings. The SRM has high starting torque and high power density. But it has torque ripples due to nonlinear magnetic characteristics. Therefore, SRM has highly non-linear torque producing characteristics. Because fuzzy logic is a flexible and general-purposed method for implementing non-linear dynamic functions, it is effective for the control of high current SRM. We design the fuzzy controller and demonstrate the fuzzy control system by MATLAB.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.840-841
• /
• 2011

본 논문은 평형운전조건 및 고정자 동손 최소화조건이 적용된 단상 LSPM 전동기를 기본모델로 하며 이를 기초로 기동특성 및 정동특성을 고려한 최적설계 방법을 제안한다. 기동특성 및 정동특성을 고려한 설계 변수로는 회전자 도체의 형상과 엔드링의 축방향 길이를 선정 하였으며 이를 통하여 평형운전조건과 고정자 동손최소화 조건을 만족하는 동시에 기동특성 및 정동특성을 고려한 최적모델을 설계하였다. 또한 최적설계 과정을 통하여 얻은 특성들을 유한요소해석을 통해 비교 및 분석하였으며 본 논문에서 제안하는 실용적인 최적설계 방법의 타당성을 검증한다.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.22-24
• /
• 2003

유도성 기동 영구자석 전동기의 경우 고효율성 및 자기동성으로 인해 현재 산업계에서 많이 사용되고 있는 유도기를 대체할 가능성이 크다. 정상 상태에서는 영구자석 동기 전동기로 작동하며 기동시에는 유도바의 역할로 유도기로서 동기화에 이르게 된다. 이때, 적절한 설계가 이루어지지 않으면 기동 또는 동기화에 실패할 수 있으므로 기동시의 과도특성 해석은 매우 중요하다. 본 논문에서는 기계 방정식과 결합된 유한요소해석 프로그램을 이용하여 전동기의 기동 및 동기화 특성을 해석하고자 한다. 해석의 타당성을 검증하기 위하여 시험용 전동기를 제작하고 과도 상태 시험을 수행하여 해석결과와 비교한다.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.46-48
• /
• 2004

Recently, the study of sensorless drive of IPMSM is coming to be active. In sensorless drive, because the wrong estimation of the initial rotor position brings about the decrease of the starting torque, or a temporary reverse revolution, it is important to know the exact importation of the initial rotor position. In this paper, the initial rotor position estimation method is based on the current peak measured by applying the pulsewise voltage and the current peak is changed according to the rotor position owing to the saliency of the rotor. The effectiveness of the proposed algorithm is verified by the experimental results.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.973_974
• /
• 2009

본 연구는 영구자석 AC 동기전동기의 초기 기동제어에 대하여 연구하였다. 회전자 위치 검출용 센서는 홀센서를 사용하였고 전동기 운전을 벡터제어를 사용하기 위해 전동기가 정지된 상태에서 홀센서 신호에 따른 회전자 위치를 계산하였다. 견인전동기가 주행저항 보다 큰 견인력을 내기 위해 전동기를 BLDC로 기동한 후 안정적 운전을 위해서 벡터제어로 전환하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.105_106
• /
• 2009

본 논문은 가압펌프용 전동기에 대한 기동방법을 정류소자(Soft starter)에 의한 기동전류 제어방식을 채택하고 있는 수도사업장에서 한전 수전에 의한 펌프모터 기동시에는 원활하게 운전이 가능하였으나 비상용 디젤발전기 부하운전에서 펌프모터를 기동하는데 실패함에 따라 상이한 전력공급계통으로부터 펌프모터 기동시 콘덴서의 특이현상과 고조파의 영향에 따른 모터 기동특성을 비교분석한 사례를 중심으로 연구되었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.311-319
• /
• 1998

DC Motors have been widely used in industry as driving power motors for electrical vehicles cranes and winches due to their strong starting torques and as servo-motors for position and speed control systems due to their convenience of speed control etc. Generally in the speed control systems of motors speed sensors are required and this fact results in he increased price and operating cost and in the limitted applications. This paper presents a new speed control method for sensorless DC motors. In this scheme the speed signal is estimatd by the measurement values of the armature voltage and current. A Fuzzy feedback controller instead of the conventional PID controller. Through simulations the effectiveness and usefullness of the proposed method are illustrated.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.460-461
• /
• 2006

Computer Loads can be found in all of modern society. The switching mode power supplies used in personal computers are major sources of harmonic currents. Harmonic currents can cause lots of harmonic problems such as disruption in computer performance. A series resonant filter is very effective in harmonic reduction for personal computer loads. Voltage sags are short duration reductions in rms voltage. The main causes of voltage sags are faults, motor starting, and transformer energizing. Personal computers are another example of devices sensitive to voltage sags. A serious voltage sag at the terminals way lead mis-operation of the equipment. This paper presents an in depth analysis to evaluate the effect of harmonics reduction based on the IEC 61000-3-2 and the effect of voltage sag using ITI curve by applying a series resonant filter for personal computer loads.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.666-673
• /
• 2000

This paper describes the full load test results of IGBT VVVF inverter for the railway propulsion system. The 1,650kVA IGBT VVVF inverter has been developed. Therefore, the field test is performed in SMG 6 Line to confirm its the reliability and performance. The train consists of 4M4T(4 Motor car 4 Trailer Car) and the electrical equipment for field test are as follows VVVF inverter 4 sets, 16 traction motors and 2 SIVs. The propulsion system is composed with IC4M(1-Controller 4-Motors). The results of propulsion system which have the excellent acceleration/deceleration and the jerk characteristics as well as starting ability on slope are taken through the field test.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.80-82
• /
• 2004

The single phase switched reluctance motor(SRM) is more simpler and robust in the structure than poly phase SRM. It has the merits that it reduces the switching elements and the energy density per volume is very high. Recently, it has been researched and developed in various types and starting method due to the technique of power electronics and the computer added design. This paper presents a analytical representation of the phase inductance of a single phase SRM, as function of position and current, taking into account the non-linearity of the magnetic circuit. the method is based on Fourier series expansion. Analytical expressions for the calculation of instantaneous phase inductance, flux linkage, coenergy and electromagnetic torque as a function of rotor position and winding currents are derived.