• 제목/요약/키워드: start time

검색결과 1,586건 처리시간 0.023초

금낭화(Dicentra spectabilis)의 배우체 형성 및 접합자배의 발달 (Formation of Gametophytes and Development of Zygotic Embryo in Dicentra spectabilis)

  • 심옥경;이강섭;김이엽;은종선
    • 한국자원식물학회지
    • /
    • 제18권2호
    • /
    • pp.302-308
    • /
    • 2005
  • 본 연구는 금낭화 배우체의 형성과 배 발달특성에 관한 기초 자료로 활용하기 위해 수행되었다. 시원세포로부터 발달된 소포자 모세포는 화뢰의 길이가 1 mm일 때 감수분열을 하여 4면체형(tetrahedral) 4분자가 형성되었다. 4개의 소포자는 분리되어 각각 웅성배우체로 발달하였다. 대포자 모세포는 화뢰의 길이 $4{\sim}5\;mm$에서 관찰되었다. 대포자의 발달유형은 정상형(polygonum)이었으며, 배낭의 형태는 굽어있는 곡생배주(amphitropous)였다. 3개의 뚜렷한 반족세포는 배낭이 성숙한 후에도 퇴화하지 않고 남아있었다. 개화 전 자웅배우체는 충분히 성숙하였다. 개화 시에 수술과 암술의 길이는 거의 비슷하거나 수술이 0.5 mm 짧아서 자화수정에 적당한 구조를 가지는 것으로 나타냈다. 수정 후 배는 구형, 심장형을 거쳐 자엽배까지 발달하였으며, 종자 산포시 초기 자엽배를 가지고 있음을 알 수 있었다.

PCB Handler의 과도응답해석 및 충격계수 산출 연구 (A Study on the Transient Response and Impact Coefficient Calculation of PCB Handler)

  • 이병화;권순기;고만수
    • 디지털융복합연구
    • /
    • 제15권7호
    • /
    • pp.223-229
    • /
    • 2017
  • 유럽, 미국을 비롯한 일본 등 선진 업계에서는 오랜 기간의 시험을 거쳐 충격계수의 시험결과를 보유하고 있으며, 장비를 설계할 때 이를 적용하여 구조물의 안정성을 확보하고 있다. 그러나 국내 산업체의 실정으로는 실제 구조물이 받는 여러 가지 동적인 외력에 의한 영향을 시험을 통해 충격계수를 확보하기에는 많은 비용과 시간이 소요되기 때문에 선진업체에서 제공하는 충격계수를 활용하여 장비를 설계하고 있다. 본 논문에서는 유한요소해석 프로그램인 NX/NASTRAN을 이용하여 반도체 검사 장비인 PCB Handler의 정하중해석과 충격하중에 대한 과도응답 해석을 진행하고, 변위 결과를 비교하는 방법으로 충격계수를 산출하였다. 충격계수 산출 방법은 일본 구조 구격에서 사용하고 있는 방법을 적용하였으며, PCB Handler가 검사를 위해 급출발 또는 급정지 시 충격계수는 1.27로 산출되었다. 해석으로 얻어낸 충격계수는 향후 장비의 구조개선과 기존장비를 기반으로 제품 개발 시 사용할 수 있어 업계에 도움이 될 것으로 판단된다.

이클립스 기반의 교육용 컴파일러 통합개발환경 (Development of an Eclipse-based IDE for Educational Compilers)

  • 성우경;강현석;배종민
    • 컴퓨터교육학회논문지
    • /
    • 제14권5호
    • /
    • pp.9-18
    • /
    • 2011
  • 컴파일러 교과목에서 수행하는 컴파일러 개발 프로젝트는 많은 경험과 기술을 얻을 수 있다. 그러나 한 학기에 이수하기 부족한 강의 시간과 컴파일러 개발의 높은 난이도 때문에 수업에 어려움을 겪는다. 그리고 컴파일러 목적시스템은 대게 인터프리터로 구현되기 때문에 학생의 흥미를 유도하기도 어렵다. 이에 따라서 컴파일러 교육은 이론 위주의 교육이 되기 쉽다. 이러한 한계를 극복하기 위하여 본 논문에서는 컴파일러의 이론과 실제를 보다 쉽게 습득할 수 있는 통합개발환경을 제시한다. 개발된 통합개발환경에는 마인드스톰 NXT 로봇을 목적시스템으로 하는 레퍼런스 컴파일러와 컴파일러 제작 도구, 목적언어 테스트 도구, 코드생성 시각화 도구가 포함되며 이클립스 플러그인 기반으로 개발되어 편의성과 확장성이 뛰어나다. 개발된 통합개발환경은 학생들이 컴파일러를 보다 쉽게 이해하고 개발할 수 있도록 도와준다.

  • PDF

Falcon 9 로켓 3회 발사 소음의 비교 분석 (Comparative analysis of noise from three Falcon 9 launches)

  • Mathews, Logan T.;Gee, Kent L.;Hart, Grant W.;Rasband, Reese D.;Novakovich, Daniel J.;Irarrazabal, Francisco I.;Vaughn, Aaron B.;Nelson, Pauline
    • 한국음향학회지
    • /
    • 제39권4호
    • /
    • pp.322-330
    • /
    • 2020
  • 본 연구에서는 미국 캘리포니아주 소재 반덴버그 공군기지(Vandenberg Air Force Base)에서 3차례 발사된 Falcon 9의 원거리장 소음에 대해 논하였다. 발사 소음은 3회 모두 롬폭(Lompoc) 도시 인근의 동일 위치에서 측정되었다. 전체 음압레벨(overall sound pressure level)은 3회 모두 유사하지만 기상조건과 관련된 차이점이 발사 초반부에 관찰되었다. 음압레벨 기준 최대 지향성은 약 65°로서 수평 정적 연소시험으로부터 얻어진 결과와 일치하였다. 세번째 발사 소음에 대하여 각 발사 단계에 따른 파형 및 스펙트럼을 분석하였다. 1단 엔진 추진 구간에서 소음의 대역폭은 시간에 따라 감소하였으나 그 크기는 모든 주파수에 걸쳐 주변 소음레벨을 상회하였다. 또한, 발사 후반부 데이터에서 관찰되는 특이 경향은 1단 엔진 정지 및 2단 로켓 점화와 연관이 있는 것으로 추정되었다.

선박의 안전운항을 위한 깊이정보 기반의 졸음 감지 시스템 (A Detection System of Drowsy Driving based on Depth Information for Ship Safety Navigation)

  • 하준;양원재;최현준
    • 해양환경안전학회지
    • /
    • 제20권5호
    • /
    • pp.564-570
    • /
    • 2014
  • 본 논문에서는 컬러정보와 깊이정보를 사용하여 얼굴을 검출하고 추적한 후 항해사의 졸음을 탐지하는 방법을 제안한다. 이 방법은 얼굴검출 과정과 얼굴추적 과정으로 구성된다. 얼굴검출 과정에서는 기존의 방법 중 가장 좋은 성능을 보이는 Adaboost 알고리즘을 사용하며, Adaboost로 입력되는 영상의 영역을 사람이 존재하는 영역으로만 제한하여 얼굴을 검출한다. 얼굴검출 과정에서 얼굴이 검출되면 그것을 템플릿으로 하여 얼굴추적 과정이 수행된다. 제안한 방법의 성능을 평가하기 위하여 실험영상을 이용하여 실험을 수행하였다. 실험결과 제안한 졸음탐지 방법은 기존의 방법에 비해 약 23 %의 수행시간을 보였으며, 또한 졸음탐지 방법은 추적 시간과 추적 정확도에 있어서 상보적인 관계를 가지며, 특별한 경우를 제외한 모든 경우에서 약 1 %의 낮은 추적오차율을 보였다.

지역기반 환경체험학습의 효과에 관한 연구 (A Study on the Effects of Experiential Learning for Environment Based on Living Area)

  • 이동엽;김희철;박만근;안아영;이지숙;이지희;정철
    • 한국환경교육학회지:환경교육
    • /
    • 제20권1호
    • /
    • pp.19-27
    • /
    • 2007
  • This study was intended to answer the question, 'What kinds of effects will be aroused by experiential learning for environment based on living area?'. Experiential learning for environment was operated to 17 elementary school students in 4th grade in Kyeong-san city. The results were drawn analyzing the mind map for the changes of environmental consciousness before and after learning, and they are as below. First, it had an effect to change the meaning association of the relationship between 'river and me'. Meaning association was 'river-a thing' before experiential learning, but it was developed as 'river-a thing-me' after learning. This means that students expanded understanding of the world that they were belonging and self-spatialization was promoted. The expansion of meaning association would be a start point and a method to promote their segmentation for each student. Second, students could self-directly modify misconception and preconception after experiential learning. It showed that students could find meanings in the world that they were belonging by experiential learning for environment, and misconception obtained by concept learning without actual situation could be revised through the truth recognition in meanings, and student could see what things displayed. Therefore preconception would be corrected. Of course, everything would not be completed by just one time of experiential learning, and consistent experience learning should be operated. Third, experiential learning promoted the change of sensitivity. Students had shallow sensitivity, which appeared in the relation with things, since having learned only inside of class without a direct observation. However their sensitivity could be increased by experiencing specific things. Fourth, there was the change of classification recognition. Students found properties of things with a direct observation. It raised their ability to classify things, and to understand an individual thing in 'a class'.

  • PDF

Pilot-scale 회전식 드럼 바이오필터를 이용한 Styrene 제거 (Removal of Gaseous Styrene using a Pilot-Scale Rotating Drum Biotrickling Filter)

  • 황재웅;임지성;장석진;이은열;최차용;박성훈
    • KSBB Journal
    • /
    • 제21권3호
    • /
    • pp.188-193
    • /
    • 2006
  • 본 연구에서는 신 개념의 바이오필터 시스템인 RDBF를 이용하여 기상의 styrene을 제거하고자 하였다. 다양한 운전조건에서 시스템의 성능을 평가하고, 진공흡입을 통해 과다성장 미생물을 제어하고자 하였다. RDBF에서는 sheet 형태의 충진 담체를 사용하므로 영양원 및 공기의 균일한 공급이 가능하였고, 빠른 속도로 균일한 미생물 층을 담체 표면에 형성할 수 있었다. 또한 기-액 접촉면적을 증대 시켜 95% 이상의 안정적이고 높은 styrene 분해 효율과 $125g/m^3{\cdot}hr$의 높은 제거 용량을 가질 수 있게 해주었다. 하지만 우수한 성능은 미생물의 과다성장에 따른 기공의 폐쇄현상 때문에 오래 지속되지 않았고 반응기의 성능과 안정성은 급속히 저하되었다. 이를 해결하기 위해 진공흡입을 통한 미생물 제거를 시도하였으나 제한적인 효과만을 확인하였다. 향후 RDBF 반응기의 상업화를 위해서는 보다 효율적인 미생물 제어 방법이 개발될 필요가 있다.

흡수성 봉합사를 이용한 아킬레스건 파열의 치료 (Treatment of Achilles Tendon Rupture with Absorbable Suture)

  • 강찬;황득수;황정모;송재황;신병건;박종화
    • 대한족부족관절학회지
    • /
    • 제18권3호
    • /
    • pp.115-118
    • /
    • 2014
  • Purpose: The purpose of this study is to report on the result of repairing Achilles tendon using absorbable suture under nerve block. Materials and Methods: We retrospectively reviewed 20 patients with acute Achilles tendon rupture who were followed up for at least six months after the operation. We repaired Achilles tendon using two absorbable sutures using the Krackow technique for the proximal stump and the Kessler technique for the distal stump. A programmed postoperative management including non-weight bearing with a short leg cast for four weeks after the operation was applied for all patients. We evaluated clinical results using American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score, visual analogue scale (VAS) for satisfaction, range of motion of ankle, functional recovery rate, and the starting time of single heel raise. Results: The mean VAS score for satisfaction and AOFAS score was 9.2 and 93.0, respectively. The affected ankle showed a mean dorsiflexion rate of 90% and plantar-flexion rate of 94% compared to the uninjured side. The single heel raise could start at a mean of 3.5 months after the operation. Conclusion: Treatment of Achilles tendon rupture with absorbable suture material using the hybrid suture technique of proximal Krackow and distal Kessler showed sufficient stability and minimal chronic inflammatory reaction.

SDN/NFV의 군 적용 타당성 분석 (The Validity Analysis of SDN/NFV Military application)

  • 장지희;권태욱
    • 한국전자통신학회논문지
    • /
    • 제15권4호
    • /
    • pp.687-694
    • /
    • 2020
  • SDN과 NFV은 차세대 네트워크 기술로서, 데이터센터, 캠퍼스, 대형회사 등 Cloud가 구축되어 있거나, 서비스 제공 중심의 통신회사 등에서 활발하게 적용하고 있다. 특히, 군(軍) 적용을 위해서는 국방통합데이터센터가 대표적인 예가 될 것이다. 국방통합데이터센터(DIDC)가 지능화된 센터로 도약하기 위해 최신 정보통신기술(ICT)을 적용한 「스마트 국방통합데이터센터」 추진에 박차를 가하고 있다. DIDC 설립 당시, Cloud 서비스 등의 인프라 구축을 30% 안팎의 수준으로 시작하여, 현재 'Cloud 퍼스트'를 통해 D-Cloud를 75%까지 확장할 예정이다. 또한, SDN/NFV 도입하므로 DIDC의 운용비용과 인력을 절감하고, 정보자원의 효율적인 이용과 사이버 정보보호체계에 대한 능력을 강화할 예정이며, 각 체계 사용에 유연성과 민첩성을 높여 앞으로 국방경영에 효율성에 이바지하기 위해 노력하고 있다. 이에 DIDC을 중심으로 SDN/NFV 도입의 당위성과 기대효과를 논하고자 한다.

강풍 시 전력망 연계기준을 만족하는 해상풍력발전단지 강제종료 방법 (Supervised Shutdown of an Off-shore Wind Farm to meet the Grid Code in a Storm-driven Situation)

  • 유약;김연희;정태영;강용철
    • 전기학회논문지
    • /
    • 제60권7호
    • /
    • pp.1299-1304
    • /
    • 2011
  • A wind turbine (WT) should be shut down as fast as possible to minimize its own damage in a storm-driven situation. Shutdown of a large wind farm requires a power grid to have a ramp-up capability large enough to balance between generation and consumption of electrical energy. This paper proposes a supervised shutdown algorithm of a wind farm to meet a required ramp-down rate in a grid code in the case of a storm-driven situation. The information on the speed and the direction of wind is measured at a wind mast (WM) installed around a wind farm. If the wind speed exceeds a cut-out speed, the number of WTs to be shut down simultaneously is decided to meet a required ramp-down rate of a grid-code. Arrival times to each WT from the WM are calculated and sorted in the order of time. Then a sequence of groups is generated. The shutdown start/end times of each group are decided to avoid superposition between adjacent two groups. The performance of the proposed shutdown algorithm is verified under various storm scenarios. Results indicate that the proposed algorithm can not only protect the wind farm in the case of a storm-driven situation but also meet the required ramp-down rate. In addition, the algorithm can produce more energy than that of a conventional shutdown algorithm.