• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.171-182
• /
• 2003

In this paper, we propose an efficient and simple fair queueing algorithm, called Minimum Possible Virtual Start Time Fair Queueing (MPSFQ), which has O(1) complexity for the virtual time computation while it has good delay and fairness properties. The key idea of MPSFQ is that it has an easy system virtual time recalibration method while it follows a rate-proportional property. MPSFQ algorithm recalibrates system virtual time to the minimum possible virtual start time of all backlogged sessions. We will show our algorithm has good delay and fairness properties by analysis.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.10
• /
• pp.1065-1072
• /
• 2008

A HDD adopts a sensorless brushless DC (BLDC) motor as a spindle motor. Because there is no direct sensor measuring rotor position. open loop commutations with inductive sensing are used to increase the rotor speed up to a certain speed where the zero crossings of the back electromotive force (EMF) voltage are measurable. Therefore, successful open loop commutations are necessary for the stable start-up control of the spindle motors. In this paper, the time scale and the number of the open loop commutations are employed for design parameters to guarantee robustness to torque constant variation and initial rotor position. The design results are verified by experiments on a very low current start-up of the spindle motor with various environment. The experimental results show that the design results can decrease the start-up failure rate considerably.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.2
• /
• pp.87-96
• /
• 1993

Because of the complexity, nonlinearity and long-time delay of power plant, the star-up operation of a fossil power plant is very difficult to automate. So the start-up operation is always carried out by the skilled human operators, who utilize their knowledges and experiences for the predesigned start-up schedules and procedures. In this paper, a fuzzy logic controller is designed for the start-up operation of the power plant. And the operators experiences are modeled in terms of fuzzy sets and variables. To validate the controller, a drum-type boiler of the Seoul Power Plant is constructed via the signal flow diagram. Using the model, the suggested automatic start-up operation is verified, and the results are also presented.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.5
• /
• pp.463-468
• /
• 2017

One of the most critical part for magnetron driving in microwave oven is start-up control. For this, switching frequency of resonant inverter should be carefully controlled in order to supply sufficient power to the filament of the magnetron and to prevent rectifier diode from destruction caused by the excessive voltage across them. This paper proposes a novel start-up control strategy for LLC resonant inverter for microwave oven considering the non-oscillation mode time and the magnetron voltage during the start-up process. The validity of the proposed method is verified through the experiment with 1,200W microwave oven using LLC resonant inverter.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.101-108
• /
• 2011

On cold start operation of an SI engine, a catalyst shows poor performance before it reaches activation temperature. Therefore, fast warmup of the catalyst is very crucial to reduce harmful emissions. In this study, an appropriate control strategy is investigated to increase exhaust gas temperature through changes of spark timing. Combustion stability is also considered at the same time. Exhaust gas temperature and pressure of combustion chamber are measured to investigate the effects of spark timings on cold start and idle performance. Experiments showed that retarded spark timing promotes the combustion at the end of expansion stroke and increases exhaust gas temperature during cold start.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.12
• /
• pp.1147-1152
• /
• 2013

In this study, the effect of an insulation coating on the start time of a linear region is theoretically investigated when an insulation-coated hot-wire is used for the transient hot-wire method (THWM). For this purpose, important parameters affecting the start time of the linear region are presented from an analytical solution of temperature-rise for an insulation-coated hot-wire. Furthermore, a critical time to ignore the influence of important parameters is studied. The theoretical results indicate that the effect of the insulation coating rapidly disappears with a decrease in the wire radius, coating thickness, thermal diffusivity of insulation material or an increase in the thermal conductivity of the insulation material. The results of this study will be helpful for selecting a proper start time of the linear region for the THWM using insulation-coated hot-wires.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.97-105
• /
• 2008

The kinematic variables for swimming and fin-swimming start motions were analyzed and compared using 3-dimensional cinematography. For the swimming start, the arm segment moved towards the upper rear and trunk towards the upper front followed by a descent towards the lower front, while the fin-swimming start motion showed movement towards the lower front for all segments. The total body center of gravity for the swimming start showed horizontal movement far to the front followed by a rapid descent while the fin-swimming start showed close movement towards the lower front in a short period of time. Upon entering the water, the center of gravity for swimming showed high vertical velocities while fin swimming had high horizontal velocities. For both swimming and fin swimming, the upper extremity velocity had more influence on the total center of gravity velocity than the lower extremities. Flexion of the hip joint was observed before the jump for the fin swimming start while the swimming start showed two flexions in mid-air succeeding the jump. The flexion and extension movements at the knee joint during the fin-swimming start motion were shown to be larger and more rapid than those of fin-swimming.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.6
• /
• pp.201-214
• /
• 2023

This study attempted to analyze the impact of individual entrepreneurial capabilities on entrepreneurial intention targeting small and medium-sized business employees, and sought to confirm the mediating effect of entrepreneurial efficacy and entrepreneurial mentoring between entrepreneurial capabilities and entrepreneurial intention. The sub-variables of entrepreneurship competency were analyzed separately into creativity, problem solving, communication, and marketing. 368 questionnaires collected from employees at small and medium-sized manufacturing companies located across the country were used for empirical analysis. A parallel dual mediation model with no causal relationship between parameters was used for empirical analysis using SPSS v26.0 and PROCESS macro v4.2. As a result of the analysis, first, among the start-up competencies, creativity, communication, and marketing were confirmed to have a significant positive (+) effect on start-up efficacy. Second, among the start-up competencies, creativity, communication, and marketing were tested to have a significant positive influence on start-up mentoring. Third, both startup efficacy and startup mentoring were found to have a significant positive influence on startup intention. Fourth, among start-up capabilities, creativity and marketing were confirmed to have a significant positive (+) effect on start-up intention. Fifth, startup efficacy and startup mentoring were found to have a mediating effect on startup intention except for problem solving among startup competencies. As a result, it was confirmed that in order to strengthen the intention to start a business among small and medium-sized business employees, start-up efficacy and start-up mentoring are important factors, and that marketing and creativity have an important influence among individual start-up capabilities, so education and prior preparation for these are necessary. As follow-up research, it will be necessary to apply multivariate models, analyze time series data, research considering external environmental factors, and test the difference between start-up capabilities and performance considering detailed population characteristics.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.455-459
• /
• 2013

The fuel processor for the portable fuel cell includes multi-step processes consisting of hydrogen generator, heat generator and several CO clean-up stages. One of requirements of the fuel processor for portable fuel cell system is a rapid start-up time. Especially, the warm-up time for WGS reactor is crucial factors for total start-up time. In this paper, active heating protocol, which is the heating protocol of WGS reactor supplied by the oxidation of CO rich reformate in the initial stage, is used for a rapid start-up. The air stream fed to the inlet of WGS reactor rapidly oxidize the CO rich reformate in the WGS reactor. Therefore, CO concentration in reformate quickly stabilized at the desired concentration without CO surges.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.1
• /
• pp.75-81
• /
• 2017

Objective: The purpose of this study was to compare and analyze the kinematic variables and electromyography (EMG) findings that change with varying characteristics of crouch start and feedback provision, and to provide the fundamental data for record improvement in 400 mH. Method: Four short-distance runners participated in the experiment. The analyzed variables were elapsed time per interval, stride length, and muscle activities in three lower limb muscles. These variables were analyzed by using Kwon3d XP and Noraxon Myoresearch. The participants were subjected to three conditions, including two conditions that relate to the thrusting foot on the rear block and another condition pertinent to feedback provision. Results: In terms of a one-step interval, the elapsed time in condition A was longer than that in condition B, and the one after the feedback was the longest. The stride length of a one-step interval was the longest in condition A. The stride length of a two-step interval was the shortest in condition A. The muscle activity during a one-step interval showed differences in vastus medialis and medial gastrocnemius, with condition A being the highest. Conclusion: When the non-dominant left foot was located at the back, negative results were observed in terms of elapsed time and stride length. Moreover, an imbalance in muscle activity was observed between the left and right feet when the left foot was placed at the back. As a result, significant differences in elapsed time, stride length, and muscle activity were observed depending on the foot placed on the rear block. In conclusion, we identified the characteristics of crouch start in 400 mH, and a specialized program must be suggested.