• Microbiology and Biotechnology Letters
• /
• v.19 no.2
• /
• pp.163-170
• /
• 1991

Production of cyclodextrin (CD) directly from raw corn starch without liquefaction using cyclodextrin glucanotransferase (CGTase) was carried out in an agitated bead reaction system. Similar CD yield and production rate comparable with those of conventional method using liquefied starch were obtained. Especially high purity-CD in the reaction mixture without accumulation of malto-oligosaccharides was obtained. The maximum 54g/l of CD was obtained at raw starch concentration of 200g/l. CD yield was inversely proportional to raw starch concentration, and conversion yield was 0.48 at substrate concentration of 100g/l. The optimal amount of enzyme (CGTase unit/g raw starch) was found to be around 6.0. Granular structure of raw starch degraded by CGTase was observed by SEM in order to investigate the enhancing mechanism, along with those of acid or alkali pretreated raw starch, amylose, and amylopectin. Kinetic constants of CGTase on raw starch in an agitated bead reaction system were evaluated, and CGTase was competitively inhibited by CD.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.3
• /
• pp.21-28
• /
• 2003

It is essential to use base papers having proper surface characteristics in coating operation for improving coated paper quality and coater runnability. To fulfill these purposes surface sizing of coating base stock with anionic oxidized starch is commonly practiced. It is suggested that use of cationic starch for surface sizing rather than conventional oxidized starch will improve coated paper quality since cationic starch penetrates less into paper structure because of its strong electrostatic interaction with anionically charged paper surface. Strong interaction of cationic surface sizing starch with anionic coating color is expected to promote rapid immobilization of the coating color and improve coating holdout and optical property. The immediate objective of this study was to examine the influence of surface sizing starches on the properties of coated papers. Structural characteristics of the coatings formed on the substrate surface sized with cationic and anionic starches were examined. To enhance the efficiency of cationic surface sizing starch on coated paper properties, strongly charged cationic polymers were added to the surface sizing starch and its effect on coated paper properties was evaluated. Results showed that opacity and light scattering coefficient of coated paper were higher when base paper surface sized with cationic starch was used. Addition of less than 1% of cationic poly-DADMAC to the cationic surface sizing starch improved the opacity of coated paper significantly.

• Food Engineering Progress
• /
• v.15 no.1
• /
• pp.70-74
• /
• 2011

The effects of high pressure homogenization (microfluidization) on physicochemical properties of normal maize and oxidized maize starch film were studied. The molecular dispersibility of amlyose and amylopectin and the disintegration of granular structure had a marked effect on the physicochemical properties of starch films. The high pressure homogenized starch films showed increased solubility and transmittance due to the absence of gelatinized starch granules. The tensile strength of starch film increased significantly with decreasing oxygen permeability after high pressure homogenization, indicating that starch molecules were more uniformly and fully dispersed during the film formation. As a result, a clear starch film with improved mechanical properties was obtained after high pressure homogenization due to the increased interactions between the uniformly dispersed starch molecules.

• Korean Journal of Food Science and Technology
• /
• v.23 no.6
• /
• pp.683-688
• /
• 1991

Wheat flour was extruded by a single-screw extruder, and used for the ethanol production of takju. The molecular structure and enzymic susceptability of extruded starch were compared to those of steam cooked one. The gel permeation chromatographic pattern of wheat flour extrudates was not significantly different from those of raw and steam cooked starches. However, the conversion rate of extruded starch into maltose by ${\alpha}-amylase$ hydrolysis was significantly faster than those of raw ad steamed starch. The molecular weight of starch estimated from GPC pattern and the intrinsic viscosity were remarkably reduced by extrusion cooking followed by the enzymic hydrolysis for 30 min, while steam cooking and enzymic hydrolysis for 30 min did not change them significantly. Extrusion-cooked flour produced alcohol 26% higher than that of steamed flour in the laboratory takju fermentation, and 10% more alcohol in the pilot plant scale takju production.

• Korean journal of food and cookery science
• /
• v.15 no.4
• /
• pp.418-425
• /
• 1999

The characteristics and yield of resistnat starch (RS) in waxy starches which were treated with 0.1N HCl were investigated. Hydrolysis rate of waxy starches were 0.32-0.88%. The yields of RS in waxy maize and waxy barley starches increased with acid treatment time up to 12hr and then decreased. The yield of RS in waxy rice starches increased with acid treatment up to 8hr and then decreased. The hydrolysis and yield of RS were different depending upon the varieties of starch source. Autoclaved normal maize starch showed a gel-like structure, but autoclaved normal maize starch showed crystal particle on the surface by SEM. The shape of autoclaved resistant starch was not different from acid treated ones. X-ray diffraction patterns of native and acid treated starches were all A-types. X-ray diffraction patterns of autoclaved waxy maize starches showed amorphous structures, however, those of RS showed all completely crystalline structure.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.335-340
• /
• 2009

This study was performed to analyze changes in the molecular structural and physical properties of modified corn starch, in which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of the modditied corn starch after pulverization decreased 50% and increased 567%, respectively. Content of low molecular substances mersured using gel permeation chromatography (GPC) increased from 21.0% to 86.5% after pulverizing corn starch. Damaged starch content also increased from 9.63% to 83.57% after pulverizing corn starch. After pulverization, gel formation capacity corn starch was reduced compared to that of control by structure breakdown.

• Korean Journal of Food Science and Technology
• /
• v.49 no.1
• /
• pp.1-7
• /
• 2017

Molecular structure, physicochemical properties, and in vitro digestibility of starch from Korean rice cultivars for special uses (Baegjinju 1, Hanareum, Deuraechan, and Goami 4) were investigated. The starch from Baegjinju 1 had the lowest amylose content (9.7%) and Hanareum, Deuraechan, and Goami 4 had intermediate amylose (20-25%) contents. Baegjinju 1 had a lower proportion of short amylopectin branch chains than the other rice starches. Hanareum had the lowest relative crystallinity and the highest intensity ratio of $1047cm^{-1}/1022cm^{-1}$ among the rice starches. The starch from Goami 4 had a higher pasting temperature and lower gelatinization enthalpy than the other rice starches. Peak viscosity of rice starch from Baegjinju 1 was substantially higher than peak viscosity of other rice starches. Rice starch from Baegjinju 1 had significantly higher rapidly digestible starch content and lower resistant starch content than other rice starches, whereas there was no significant difference in resistant starch content among the rice starches.

• Microbiology and Biotechnology Letters
• /
• v.22 no.3
• /
• pp.283-289
• /
• 1994

The production of maltose utilizing swollen extrusion starch seems to have many technical advantages, such as, high reaction rate and high yield, production of high purity concentrated maltose, and low energy consumption, over the conventional method utilizing liquefied starch. The characteristics of maltose formation in heterogeneous enzyme reaction system comtaining swollen extrusion starch was investigated using fungal $\alpha $-amylase. The influence of extrusion conditions on structure of extruded starch, such as, degree of gelatinization, water absorption index, and water solubility index was analyzed. The relationship between the structural features and maltose forming reaction was investigated, and the result was analyzed in terms of surface reaction of insoluble extruded swollen starch. The characteristics of maltose formation from swollen sxtrusion starch was compared using endo-type fungal $\alpha $-amylase and exo-type $\beta $anylase, and the structural trasformation of extruded starch was also observed to clarify the reaction mechanism.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.832-835
• /
• 2007

Moisture content of normal, waxy, and high amylose com starches was adjusted to 10-35%, and irradiated in a microwave oven. The effect of microwave irradiation on the crystalline structure of starch was measured by using a differential scanning calorimetry (DSC), and X-ray diffractometry. Pasting viscosity profile was also determined by using a rapid viscoanalyzer (RVA). For all the 3 types of starches tested, the rate of temperature increase by the microwave irradiation was faster and more rapidly reached the maximum temperature of the pressure bomb ($120^{\circ}C$) when the moisture content was higher. X-ray diffraction and DSC data revealed that the microwave irradiated starch underwent partial disruption of crystalline structure. RVA studies showed that the irradiation caused significant reductions in maximal viscosity and breakdown, whereas pasting temperature was increased. Overall trends revealed that the microwave irradiation on the starch containing limited moisture content (less than 35%) provided the effects similar to the heat moisture treatment. These effects became more significant when the moisture content was higher. Compared to waxy com starch, normal, and high amylose com starches appeared to be more susceptible to the microwave irradiation.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1024-1028
• /
• 1998

Crystalline structure of the extrudate of high amylose corn starch was studied by X-ray diffractometer and $^{13}C\;NMR$. The X-ray diffraction crystal ratio of the extrudates (barrel temperature $100^{\circ}C$ )of high amylose corn starch slightly increased from 6.08% to 8.37% by increasing feed moisture content from 25% to 45%. But extrudates of high amylose corn starch showed similar crystal ratio on various extrusion conditions. Extrudates of high amylose corn starch (feed moisture content 20%, barrel temp $140^{\circ}C$) showed more enlarged crystal structure than that of non-extrudates. The perpendicular distance of crystal increased by extrusion. Crystal ratio was changed from $6.3{\sim}8.3%$ to $4.5{\sim}5.8%$ during storage at $4^{\circ}C$. Starch configuration was examined with $^{13}C\;NMR$. Double helical content was measured by $^{13}C\;NMR$ method. The highest double helical content (60%) was obtained from high amylose corn starch extrudate (barrel temp.: $100^{\circ}C$, feed moisture content 45%). Double helical contents and resistant starch (RS) yield (pancreatin) were positively correlated. However, double helical content of the extrudates was not changed by the storage at $4^{\circ}C$.