• The Korean Journal of Food And Nutrition
• /
• v.30 no.4
• /
• pp.689-695
• /
• 2017

Ohmic heating is an internal heating method based on the principle that when an electrical current passes through food, electric resistance heat is uniformly generated internally by food resistance. Previous studies indicate that the thermal properties, external structure, internal structure, and swelling power of ohmic heat treated starch of various starches, such as potato, wheat, corn, and sweet potato, differed from those of conventional heating at the same temperature. In this study, the pasting property of starch, treated with ohmic and conventional heating, were measured by RVA (Rapid Visco-Analyzer). Our results show that as the ohmic heating temperature increased, the PV (Paste Viscosity) of the starch decreased significantly, and the PT (Pasting Temperature) increased. Changes in PV and PT indicate that the swelling of starch remains unchanged by ohm heating. The HPV (Hot Paste Viscosity), CPV (Cold Paste Viscosity) and SV (Setback Viscosity) of ohmic heated starch also differed from the conventional heated starch. The pasting property is similar to the viscosity curve of common cross-linked modified starch. In this experiment, we further confirm the similarity with modified starch and its usability.

• The Korean Journal of Food And Nutrition
• /
• v.27 no.1
• /
• pp.112-119
• /
• 2014

Ohmic heating uses electric resistance heat which occurs equally and rapidly inside food when the electrical current is transmitted into. Prior to the study, we have researched the potato starch's thermal property changes during ohmic heating. Comparing with conventional heating, the gelatinization temperature and the range of potato starch treated by ohmic heating are increased and narrowed respectively. Herein, we have studied thermal property changes of wheat, corn, potato and sweet potato starch by ohmic heating as well as conventional heating. And then we measure the water holding capacity of starches. Annealing of starch is a heat treatment method heated at 3~4% below the gelatinization point. This treatment changes the starch's thermal property. In the DSC analysis of this study, the $T_o$, $T_p$, $T_c$ of all starch levels have increased, and the $T_c$-$T_o$ narrowed. In the ohmic heating, the treatment sample is extensively changed but not with the conventional heating. From the ohmic treatment, increases from gelatinization temperature are potato ($8.3^{\circ}C$) > wheat ($5.3^{\circ}C$) > corn ($4.9^{\circ}C$) > sweet potato ($4.5^{\circ}C$), and gelatinization ranges are potato ($7.9^{\circ}C$), wheat ($7.5^{\circ}C$), corn ($6.1^{\circ}C$) and sweet potato ($6.8^{\circ}C$). In the case of conventional treatment, water holding capacity is not changed with increasing temperature but the ohmic heating is increased. Water holding capacity is related to the degree of gelatinization for starch. This result show that when treated with below gelatinization temperature, the starches are partly gelatined by ohmic treatment. When viewing the results of the above, ohmic treatment is enhanced by heating and generating electric currents to the starch structure.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.4
• /
• pp.304-311
• /
• 2019

Ohmic heating is a heating method based on the principle when an electrical current passes through food. Since this method is internal, electrical current damage occurred during heating treatment. The results of ohmic heated starch's external structure, X-ray diffraction, DSC analysis and RVA were differed from those of conventional heating at the same temperature. Several starches changed more rigid by structure re-aggregation. This change in starch was caused by change of physical, chemical, rheological property. The rheology of ohmic heated potato and corn starch of different heated methods were compared with chemically modified starch. After gelatinization, sample starch suspension (2%, 3%) measured flow curves by rheometer. Cross-linked chemically modified starch's shear stress was decreased with degree of substitution reversibly. Ohmic heated more dramatic, at $60^{\circ}C$. Potato starch's shear stress was less than commercial high cross-linked modified starch. Flow curves of potato starches measured at $4^{\circ}C$, $10^{\circ}C$, $20^{\circ}C$. Showed that Ohmic heated potato starch's shear stress ranging between $4^{\circ}C$ and $20^{\circ}C$ was narrower than modified starch. According to this study, ohmic heated potato starch can be used by decreasing viscosity agent like cross-linked modified starch.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.160-166
• /
• 2007

This study was performed to analyze the molecular structural and physical properties changes of modified rice starch, which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of rice starch after pulverization decreased 20% and increased 25%, respectively. Low molecular substances content in rice starch using GPC (gel permeation chromatography) increased from 36.5% to 59.5% after pulverizing of rice starch. Damaged starch contents in rice starch also increased from 16.4% to 99.2% after pulverizing of rice starch. Water holding capacity, solubility and transmittance of rice starch after pulverization increased compared to those of control. Apparent viscosity value of rice starch after pulverization decreased to 7% in control based on $30^{\circ}C$ and 20 RPM conditions.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.705-712
• /
• 2008

Sweet potato starch was modified using Thermus aquaticus $\alpha$-1,4-glucanotransferase ($Ta{\alpha}GT$), and its structural and rheological properties were investigated. $Ta{\alpha}GT$-modified starch had a lower amylose level and molecular weight than raw starch. The chain length distribution showed an increased number of short and long branched chains and the formation of cycloamyloses. Compared with raw starch, $Ta{\alpha}GT$-modified starch displayed a lower gelatinization enthalpy and a wider melting temperature range. The X-ray diffraction of $Ta{\alpha}GT$-modified starch was a weak V-type pattern with distinct sharp peaks at 13 and $20^{\circ}$. Scanning electron micrographs of modified starch exhibited big holes on the surface and the loss of granular structure. The frequency sweep measurement revealed that the gel of $Ta{\alpha}GT$-modified starch was more rigid than raw starch gel. However, the structure of modified starch gel was destroyed by heating at $75^{\circ}C$, and a firm gel was re-formed by subsequent storage at $5^{\circ}C$, indicating thermoreversible property.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.31 no.2
• /
• pp.25-33
• /
• 1999

A great difference in drainage time was observed from the recycled stocks between corrugated container board and its component papers, liner and medium paper. It could be assumed that the different drainage property should be caused from a starch adhesive present in the corrugated board. Thus, three types of starch such as dried Stein-Hall adhesive, cooked starch solution, and its dried film were added to linerboard stock in order to investigate the mechanism of drainage reduction. The water-swollen starch particles derived from Stein-Hall adhesive were drastically deteriorated the drainage time, even though the amount of starch is very small (2% or below). The drainage time of OCC was improved by 25% when amylase was used a new biological treatment. The results from the lab and mill test showed that the starch-degradable enzymatic treatment improves the drainage property as well as the reduction of calcium hardness.

• Korean Journal of Human Ecology
• /
• v.14 no.6
• /
• pp.1037-1046
• /
• 2005

Using three consecutive years' harvested rices and their starches isolated from rice flours by alkaline method, it was found that no significant aging effect on rice flour and starch was observed based on following results. Proximate data of flours or starches showed in similarity, except high level of crude fat in rice flour and rice starch harvested in 2002. In SEM, the surface of aged rice flour had slightly layered shape due to possible abrasion during storage, and that of aged starch showed more smooth and less rigid polygonal shape. X-ray diffraction patterns of flours and starches were all A type, and crystallinity of rice starch harvested in 2000 had the smallest. From tristimulus colorimetry (Hunterlab Color), total color difference ($\Delta$E) calculated from L, a, and b gave less color difference with the darkest in 2002 harvested one among flours and the lightest in 2001 one among starches. WBCs of both 2002 rice flour and starch were the lowest among samples studied. At 80$^{\circ}C$, swelling power and solubility of rice starches harvested in 2000, 2001 and 2002 were 14.35, 9.75; 14.04, 9.6; and 12.49, 8.82, respectively. The highest peak viscosities measured by RVA were shown both in 2001 rice flour and in its starch. Starch and milled rice flour harvested in 2000 had higher hydrolytic $\alpha$-amylase, compared to other flour and starch samples.

• The Korean Journal of Food And Nutrition
• /
• v.25 no.4
• /
• pp.1068-1074
• /
• 2012

Ohmic heating uses electric resistance heat which occurs equally and rapidly inside of food when electrical current is flown into. In other study, we researched about soybean protein's characteristic changes by ohmic heating. Nevertheless treated same temperature, denaturation of soybean protein were accelerated by ohmic heating than conventional heating. In this time, we studied thermal property change of potato starch by ohmic heating besides conventional heating. For this purpose, potato starch was heated at same subgelatinization temperature by ohmic and conventional heating. And thermal properties were tested using DSC. Annealing of starch is heat treatment method that heated at 3~4% below the gelatinization point. DSC analysis results of this study, the $T_o$, $T_p$, $T_c$ of potato starch levels were increased, whereas $T_c{\sim}T_o$ was narrowed. This thermal property changes appear similar to annealing's result. It is thought the results shown in this study, because the heating from below the gelatinization point. 6, 12, 24, 72, and 120 hours heating at $55^{\circ}C$ for potato starch, $T_o$, $T_p$, $T_c$ values continue to increased with heating time increase. The gelatinization temperature of raw potato starch was $65.9^{\circ}C$ and the treated starch by conventional heating at $55^{\circ}C$ for 120 hr was $72^{\circ}C$, ohmic was $76^{\circ}C$. The gelatinization range of conventional (72 hr) was $10^{\circ}C$, ohmic was $8^{\circ}C$. In case of 24 hours heating at 45, 50, 55, 60, $65^{\circ}C$ for potato starch, the result was similar to before. $T_o$, $T_p$, $T_c$ values continue to increased and gelatinization range narrowed with heating temperature increase. In case of conventional heating at $60^{\circ}C$, the results of gelatinization temperature and range were $70.1^{\circ}C$ and $9.1^{\circ}C$. And ohmic were $74.4^{\circ}C$ and $7.5^{\circ}C$. When viewed through the results of the above, the internal structure of starch heated by ohmic heating was found that the shift to a more stable form and to increase the homology of the starch internal structure.

• Food Science and Biotechnology
• /
• v.18 no.1
• /
• pp.118-123
• /
• 2009

In order to find out the effect of low level of starch acetylation on physicochemical properties of potato starch, amylose content, digestibility of raw and gelatinized starch, thermal properties, pasting properties, and the swelling power of native and acetylated potato starches were measured. The amylose content was significantly lower in acetylated starch than in their counterpart native starches. Though a tendency in the decrease in digestibility of raw starch was observed with starch acetylation, acetylation did not alter the proportion of readily digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS) of both raw and gelatinized potato starches. No clear increase in the swelling power was observed, however, the peak and onset gelatinization temperatures and the enthalpy required for starch gelatinization decreased with starch acetylation. Peak and breakdown viscosities were reduced due to acetylation of potato starch while final viscosity and set back were increased.

• Food Engineering Progress
• /
• v.13 no.4
• /
• pp.335-340
• /
• 2009

This study was performed to analyze changes in the molecular structural and physical properties of modified corn starch, in which particle structure was broken using high impact planetary mill and ultra fine pulverizing techniques. The average diameter and specific surface area of the modditied corn starch after pulverization decreased 50% and increased 567%, respectively. Content of low molecular substances mersured using gel permeation chromatography (GPC) increased from 21.0% to 86.5% after pulverizing corn starch. Damaged starch content also increased from 9.63% to 83.57% after pulverizing corn starch. After pulverization, gel formation capacity corn starch was reduced compared to that of control by structure breakdown.