• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1298-1305
• /
• 2000

Potato starches were crosslinked with 0.1, 0.5, 1.0, and 2.0% epichlorohydrin. Starch/polyethylene(PE) cast films were prepared to contain 5% of the crosslinked potato starch. Mechanical properties and degradability of these films were measured and compared to those of the films containing native potato starch. Mechanical strength of the films containing crosslinked potato starch was higher than that of the film containing native starch. Thermal degradability measured by a FT-IR and an Instron showed that crosslinked starch/PE films degraded faster than native starch/PE films. Biodegradability of the starch/PE films was accelerated by the addition of crosslinked starch to the PE films.

• Korean journal of food and cookery science
• /
• v.28 no.6
• /
• pp.871-881
• /
• 2012

To compare the physicochemical and gel properties of mung bean starches prepared by different purification methods, starches from Korean Eohul variety and Chinese mung bean (MB) with or without hull using alkaline solution or water as solvent were purified. The optimum conditions for making muk were investigated. Apparent amylose and total dietary fiber contents, water binding capacity, solubility and pasting properties by RVA were analyzed. The characteristics of starch gels (10% dry basis) were measured for 0 and 4 day stored at $4^{\circ}C$. The protein and ash contents were significantly different (p<0.05) and lowered in starch from dehulled MB using alkaline solution. The starches from dehulled MB using alkaline solution showed the lowest color differences. Apparent amylose contents of Eohul and Chinese starches showed 37.06-39.03% and 31.57-32.74%, respectively. Chinese starch was higher in water binding capacity but lower in solubility at $85^{\circ}C$ than others. Peak, trough, cold, and breakdown viscosities of Eohul starch were higher than those of Chinese one. Mung bean starch gel made immediately exhibited clear and glossy appearance but became whiter like milk. The crystallinities of starch and starch gel showed A and B types, respectively. The hardness, gumminess, and resilience of starch gel made immediately and hardness, cohesiveness, gumminess, and resilience of 4 day stored gels were different significantly (p<0.05). Especially, Eohul starch gels purified from hulled MB showed higher resilience (bending property) and hardness. Therefore, it was suggested that high quality muk would be made using MB starch purified from hulled Korean mung bean using water as solvent.decreased in contain more than 20% of SGP added groups. The optimal concentration of SGP was found in the range of less than 10%.

• Korean journal of food and cookery science
• /
• v.19 no.1
• /
• pp.65-71
• /
• 2003

The objective of this study was to compare the textural properties and sensory evaluation of Injulmi, a traditional Korean waxy rice cake, added with 10, 20 and 30% of RS3-type resistant starch. RS3-type resistant starch was prepared from nonwaxy rice(Odaebyeo) starch by autoclaving-cooling cycle. The RS yield of RS3-type resistant starch was 9.10%. By increasing the addition level of RS3-type resistant starch, the hardness and adhesiveness of Injulmi increased as measured by using a rheometer. Hunter color L and a values of Injulmi added with RS3-type resistant starch were increased, but b value was decreased. In case of sensory evaluation, the hardness of Injulmi added with RS3-type resistant starch was higher than that of non-added Injulmi. The overall duality of Injulmi added with RS3-type resistant starch by sensory evaluation was negatively correlated with the hardness measured by rheometer(p＜.0.05).

• Preventive Nutrition and Food Science
• /
• v.4 no.4
• /
• pp.215-220
• /
• 1999

The Physical properties of corn starch were investigated by scanning electron microscopy, X-ray diffractometry and differential scanning calorimetry during the formation of enzyme-resistant starch(RS). Samples were studied in their native states and after annealing at 50, 55, 60 and 65℃ in excess water(starch : water=1:3) for 48hr. Starch granules became smaller and more rounded after annealing than in their native state. Annealing did not change the X-ray profile of native corn starch. After autoclaving-cooling cycles, native starch lost most of its crystallinity but annealed ones showed some of their crystallinity left as diffuse or poor B-type, which didn't relate to increasing Rs yields. During formation of RS, however, both native and annealed starches changed their X-ray profile from A-type to poor B-type of retrograded amylose. Annealing caused an increase in gelatinization temperature and enthalpy, but a narrowing of gelatinization temperature range. Only starch annealed at 65℃, however, showed a decrease in enthalpy even though its gelatinization temperature increased, which appeared to be due to the partial gelatinization in the amorphous region during annealing. Peak height index(PHI), the ratio of ΔH to Ti-To, increased by annealing. PHI values, therefore, showed the possibility as an indicator to predict RS yield which cannot be differentiated by differential scanning calorimetry and X-ray diffraction data.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.6
• /
• pp.1260-1268
• /
• 1999

Physical properties were investigated in tangsuyuk batter containing different amounts of ingredients, such as wheat flour, corn starch, sodium bicarbonate, alum and water. For the response surface methodology (RSM) central composite design was used to determine the optimal ingredient ratios for viscosity, color properties(lightness, redness, yellowness, color differences) and cutting forces. There were significant differences(p<0.05) between the different batter mixtures. The lightness(L) of batter was in proportion to the increased amount of wheat flour and corn starch. Higher redness was recorded with increasing corn starch. Higher yellowness was observed with increasing wheat flour and sodium bicarbonate. Color differences were higher with increasing wheat flour, corn starch, and/or alum and decreasing water. Cutting forces were linearly increased with increasing sodium bicarbonate. From these results, it is possible to monitor the effects of ingredients on physical properties of tangsuyuk batter, and to predict their optimal ratios.

• Korean Journal of Food Science and Technology
• /
• v.24 no.1
• /
• pp.70-73
• /
• 1992

Gelatinization behaviour and gel properties of corn starch modified either by hydroxypropylation only or by cross-linking and hydroxypropylation were investigated. Gelatinization temperature of corn starch decreased greatly by hydroxypropylation, but increased slightly by cross-linking with epichlorohydrin. The treatment of both hydroxypropylation and cross-linking lowered the gelatinization temperature, although it was not significantly different from that of hydroxypropylated corn starch. The swelling power of the corn starch was reduced and gel strength was increased by both modifications. The results suggested that the gelatinization behaviour and gel properties of corn starch could be improved by both cross-linking and hydroxypropylation.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2006

Tarakjuk with different amylose content was made up using roasted rice flours that consisted of the highest enzyme-resistant starch (RS), while differential scanning calorimetry (DSC) was also utilized to measure the gelatinization temperature of these roasted rice flours in order to establish cooking temperature of tarakjuk. The following qualities of tarakjuk with different amylose content were studied: color, viscosity, spreadability, starch fractions involving total starch (TS), rapidly digestible starch (RDS), slowly digestible starch (SDS) and RS, in vitro starch digestibility (IVSD) and sensory properties. During experimentation, it was found that as the amylose content of the rice flour decreased, the L value of tarakjuk decreased, whereas a value increased significantly (p<0.05). Also, while viscosity showed to increase significantly (p<0.05), on the opposite end, the property of spreadability decreased. TS ranged from $15.95{\sim}17.31%$, RDS $9.36{\sim}10.16%$, SDS $5.46{\sim}6.91%$ and RS $0.33{\sim}1.07%$, on a dry basis. Although the amylose content of rice flours decreased, IVSD increased, however showing no significant difference. When testing the sensory properties of tarakjuk, color and viscosity increased, whereas clumpiness decreased. Ilpum tarakjuk showed the highest score for nutty taste and overall acceptance levels. In fact a high correlation was shown between nutty taste and overall acceptance level (p<0.01), which leads one to believe that nutty taste is a prime factor that greatly influences overall acceptance. Furthermore, viscosity was positively correlated with both a and b values, however negatively correlated with L value (p<0.05). Moreover, roasted nutty taste and overall acceptance were positively correlated with a value (p<0.05), respectively. In conclusion, the above results suggest that tarakjuk could be made by choosing the appropriate rice flour based on the nutritional or sensory purpose.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.450-454
• /
• 2001

The physical properties of ramyon made of potato starch at various levels (12, 14 16%) were investigated to find out the effect of potato starch on ramyon quality. The higher starch content in dough, the higher water content after steaming and the lower moisture content after deep frying. As the starch content increased, the magnitudes of extrusion work of cooked ramyon and capillary viscosity of ramyon soup increased but the starting temperature of gelatinization decreased. There was a good correlation ($R^2$=0.99) between extrusion work and capillary viscosity. Firmness and chewiness values measured by texture analyser decreased with increase in starch content while tenderness and overall texture preference evaluated by sensory analysis increased.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1287-1294
• /
• 2013

In this study, thermoplastic starch (TPS), cross-linked starch (CS), and cross-linked starch modified with glycerol (CTPS) were prepared, and the mechanical properties of the compatibilized low-density polyethylene (LDPE) blends (LDPE/TPS, LDPE/CS, and LDPE/CTPS) were investigated and compared with those of uncompatibilized LDPE/TPS, LDPE/CS, and LDPE/CTPS blends. Maleic-anhydride-grafted polyethylene was used as the compatibilizer. The enhanced tensile strength and elongation at break for the compatibilized LDPE/modified starch blends are a result of the improved compatibility between LDPE and the modified starch, which was confirmed by torque measurements and scanning electron microscopy.

• Journal of Environmental Science International
• /
• v.14 no.3
• /
• pp.359-366
• /
• 2005

Starch was crosslinked with epichlorohydrin. Crosslinked starch-filled waterborne acrylate (CSWAC) films were prepared by blending this crosslinked starch with waterborne acrylate. The thermal and mechanical properties of these films were investigated by thermogravimetric analysis (TGA), tensile strength and elongation test. The biodegradability was also studied by determination of reduced sugar products after enzymatic hydrolysis and the surface morphology was investigated by scanning electron microscopy (SEM). The CSW AC film showed significantly higher tensile strength and elongation than those of starch-filled waterbonre acrylate (SWAC). The biodegradability of this film was higher than that of native starch-filled acrylate film, and was increased by the addition of crosslinked starch to the acrylate film.