• 대한인간공학회지
• /
• 제4권1호
• /
• pp.3-6
• /
• 1985

This research developes a microcomputer program for MSD which is one of the most widely llsed predetermined time standards. The program is written in BASIC and designed mainly for desk-top or portable microcomputer to facilitate the development of standard times for time study analysis. A simple case is illustrated to show the program running procedure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.961-963
• /
• 2000

Most of the application standard of the low-voltage devices have applied one the IEC standard another the UL standard. European union applied the IEC60947-1 standard has not exceed 1000V a.c. or 1500V d.c.. Therefore. it is necessary to the low-voltage device has expended for rated operational voltage with our products. The export of European market shall be made for the CE-Marking in accordance with IEC60947-1 ( Low-voltage switchgear and controlgear). We shall be considered for the requirement with the IEC standard. In this time to study for power supply system at EU ( European union. At that time for design and development in order to the construction and test method among the study for the rated insulation voltage at less then 690V.

• 대한산업공학회지
• /
• 제4권1호
• /
• pp.21-27
• /
• 1978

For labor-intensive sewing industry, productivity could be enhanced with the proper utilization of standard time system. This paper develops a standard data for sewing operations through three stages. The first is to identify the manual motions from sewing operations. The second is to simplify the MTM-1 data considering the frequency and the nature of basic motions occuring in the operations. Finally we synthesize the standard data using the simplified MTM-1 by the film analysis of the actual operations pictured in the field. The standard data developed is shown to be easier and faster with reasonable accuracy in determining the standard time compared to the MTM-1.

• 정보통신설비학회논문지
• /
• 제9권2호
• /
• pp.35-41
• /
• 2010

The balance coefficients between telecommunication lines are specified in the technical standard and the power induction computation method varies in the order of 100 times in magnitude according to the amount of impedance. The results of actual balance measurements, differing from time to time with the measurement circuit or increasing proportionally as the induction voltage increases, appeared as a measurement error because of not using the standard measurement circuit. This article investigates such errors and proposes the use of a standard balance measurement circuit and a measurement device impedance under the domestic notification standard and the ITU-T international standard.

• Wind and Structures
• /
• 제31권3호
• /
• pp.269-285
• /
• 2020

The statistical characteristics of typhoon wind speed records tend to have a considerable time-varying trend; thus, the stationary wind model may not be appropriate to estimate the wind characteristics of typhoon events. Several nonstationary wind speed models have been proposed by pioneers to characterize wind characteristics more accurately, but comparative studies on the applicability of the different wind models are still lacking. In this study, three landfall typhoons, Ampil, Jongdari, and Rumbia, recorded by ultrasonic anemometers atop the Shanghai World Financial Center (SWFC), are used for the comparative analysis of stationary and nonstationary wind characteristics. The time-varying mean is extracted with the discrete wavelet transform (DWT) method, and the time-varying standard deviation is calculated by the autoregressive moving average generalized autoregressive conditional heteroscedasticity (ARMA-GARCH) model. After extracting the time-varying trend, the longitudinal wind characteristics, e.g., the probability distribution, power spectral density (PSD), turbulence integral scale, turbulence intensity, gust factor, and peak factor, are comparatively analyzed based on the stationary wind speed model, time-varying mean wind speed model and time-varying standard deviation wind speed model. The comparative analysis of the different wind models emphasizes the significance of the nonstationary considerations in typhoon events. The time-varying standard deviation model can better identify the similarities among the different typhoons and appropriately describe the nonstationary wind characteristics of the typhoons.

• 한국지구과학회지
• /
• 제23권6호
• /
• pp.494-506
• /
• 2002

우리 나라는 현재 표준시로 경도 135 E를 기준으로 하는 I-시간을 사용하고 있으면서 I-시간대역의 서쪽 경계에 위치하고 있어 표준시가 태양시보다 30분 정도 빠르게 운용되고 있다. 우리 나라가 적용하고 있는 이 I-시간이 우리나라의 표준시로 적합한가를 판단하기 위하여 세계 각국의 표준시 사용 현황을 조사 분석하여 다음과 같은 결론을 얻었다. 현재 세계의 각 국가가 사용하고 있는 표준시를 검토해보면 주요 국가 중 56% 정도는 그 지리적 위치가 태양시와 표준시가 어느 정도 일치하고 있으며(Table 4 참조), 18% 정도는 태양시보다 30분 정도 빠른 표준시를, 그리고 또 21% 정도는 태양시보다 1시간 이상 빠른 표준시를 운용하고 있어서 대체로 태양시보다 빠른 표준시 운용을 긍정적으로 받아들이고 있다. 표준시를 태양시보다 늦게 운용하는 국가는 5% 정도가 있을 뿐이다. 이와 같이 세계 대부분의 나라에서 표준시를 태양시보다 30분${\sim}$1시간, 또는 그 이상까지도 앞세워 적용하고 있으면서 그 중에서 또 많은 나라가 서머타임까지를 시행하고 있다는 사실은 태양시에 대해 표준시를 어느 정도 앞세워 생활하는 것은 인간의 생체리듬에 악영향을 미치지 않으면서 오히려 시간 이용을 효율화하는 장점이 있다는 결론을 얻을 수 있다. 이는 한국의 경우에도 적용될 것으로 보아 태양시보다 30분 정도 빠른 현재의 표준시 I-시간이 한국인의 생체리듬에 나쁜 영향을 주지 않으면서, 오히려 하루의 시간을 효율적으로 사용할 수 있는 장점을 가진 시간환경인 것으로 판단된다. 뿐만 아니라 이러한 시간환경은 여름철에 일광절약시간제(서머타임제) 시행의 필요성을 완화시켜주는 효과도 있어 표준시를 안정적으로 운용하는 데에도 크게 기여하고 있는 것이다. 또한 이 I-시간은 UTC와 정수 시간차를 유지하면서 안정적으로 운영하려는 세계 각국의 표준시 운영 경향과도 잘 일치한다. 따라서 우리 나라가 태양시에 맞게 H$^{\ast}$-시간을 사용해야 한다는 것은 태양시와 비슷한 표준시를 사용한다는 장점은 인정되지만, 그에 못지 않게 UTC와는 비 정수 시간차 시간을 운용하게 되며, 또한 하절기에는 서머타임을 도입해서라도 태양시보다 1시간 빠른 시간을 이용해야 한다는 필요성을 유발하게 된다는 점에서 결코 바람직하지 않다고 생각된다.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.719-726
• /
• 2010

In this paper, the appropriate thermal storage time of an air-conditioning system with slab thermal storage was considered by use of summer measurement values. Two standards of heat extraction rate and criterion function were established as the standard that evaluates appropriateness. When heat extraction rate was a standard, zero hour and seven hours were obtained as appropriate thermal storage time, in the case of evaluation by energy consumption and running cost individually. Also, when criterion function was a standard, the difference between energy consumption and running cost was small, it was because the weight function to room air temperature deviation was much bigger than heat extraction rate.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.63-70
• /
• 2019

The subject of the simultaneous measuring system of base pattern and deposition pattern is a new research topic on a defect inspection of OLED. In this paper, we propose a new OLED inspection method that simultaneously measures standard and deposition pattern images. This method reduces unnecessary processes and tac time during OLED inspection. For an additional reduction of the tac time during pattern measurement, the ROI was configured to measure only in the designated ROI area instead of measuring the entire area of an image. During the ROI set-up, the value of effective deposition pattern area is included so that if the deposition pattern is out of the ROI zone, it would be treated as a defect before measuring the size and center point of the pattern. As a result, the tac time and inspection process could be shortened. The proposed method also could be applied to the OLED manufacturing process. Production of OLED could be increased by reducing tac time and inspection process.

• 산업경영시스템학회지
• /
• 제5권7호
• /
• pp.59-62
• /
• 1982

The purpose of this paper is to increase the effectiveness of decreasing time - load and cost down in manufacturing company using the new way of regulating standard time - load. Let us take an example of K automobile factory. This company have avoided the used to way of regulating standard ti me load in staff members and increased the effectiveness of decreasing time - load having participated all members centering around the Q.C circle. Here, We can take conclusions as below. 1. We could improve the consciousness of question and the consciousness of efficiency progress as a result of new way. 2. We could encourage the activation of organization and working desire of all members to be participated.

• 유통과학연구
• /
• 제14권12호
• /
• pp.5-21
• /
• 2016

Purpose - This study aims to clarify the meanings of small enterprise and modify criteria for explaining its range. Prioritizing the number of full time workers first and the sales next are proper as a new concept and range. Research design, data, and methodology - In research, 'small company' is a basic concept because the range of its standard is categorized as a 'small company' in the policy system of small & medium business. This study focuses on the solutions with ① evaluation on sales, ② standard for excluded ones ③ regulation for excluded business types in 'Act on Protection and Support for Small Enterprise'. Results - Clarifying the range of standard with maintaining the title is advisable. The scope should resist the current criteria or adopt a new standard which contains not only full time workers but also the sales. The new one may raise the policies' effectiveness because it can sort the 1% people of small enterprises. Conclusions - However, there should be a preventive system for sorting out the non-eligible ones not conformed to the CAP for small company. Therefore, it is desirable to prepare the system with 'unsuitable ones list' or regulate large income·inappropriate business types in 'Act on protection and support for small enterprise'.