• Journal of the Ergonomics Society of Korea
• /
• v.4 no.1
• /
• pp.3-6
• /
• 1985

This research developes a microcomputer program for MSD which is one of the most widely llsed predetermined time standards. The program is written in BASIC and designed mainly for desk-top or portable microcomputer to facilitate the development of standard times for time study analysis. A simple case is illustrated to show the program running procedure.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.961-963
• /
• 2000

Most of the application standard of the low-voltage devices have applied one the IEC standard another the UL standard. European union applied the IEC60947-1 standard has not exceed 1000V a.c. or 1500V d.c.. Therefore. it is necessary to the low-voltage device has expended for rated operational voltage with our products. The export of European market shall be made for the CE-Marking in accordance with IEC60947-1 ( Low-voltage switchgear and controlgear). We shall be considered for the requirement with the IEC standard. In this time to study for power supply system at EU ( European union. At that time for design and development in order to the construction and test method among the study for the rated insulation voltage at less then 690V.

• Journal of Korean Institute of Industrial Engineers
• /
• v.4 no.1
• /
• pp.21-27
• /
• 1978

For labor-intensive sewing industry, productivity could be enhanced with the proper utilization of standard time system. This paper develops a standard data for sewing operations through three stages. The first is to identify the manual motions from sewing operations. The second is to simplify the MTM-1 data considering the frequency and the nature of basic motions occuring in the operations. Finally we synthesize the standard data using the simplified MTM-1 by the film analysis of the actual operations pictured in the field. The standard data developed is shown to be easier and faster with reasonable accuracy in determining the standard time compared to the MTM-1.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.9 no.2
• /
• pp.35-41
• /
• 2010

The balance coefficients between telecommunication lines are specified in the technical standard and the power induction computation method varies in the order of 100 times in magnitude according to the amount of impedance. The results of actual balance measurements, differing from time to time with the measurement circuit or increasing proportionally as the induction voltage increases, appeared as a measurement error because of not using the standard measurement circuit. This article investigates such errors and proposes the use of a standard balance measurement circuit and a measurement device impedance under the domestic notification standard and the ITU-T international standard.

• Wind and Structures
• /
• v.31 no.3
• /
• pp.269-285
• /
• 2020

The statistical characteristics of typhoon wind speed records tend to have a considerable time-varying trend; thus, the stationary wind model may not be appropriate to estimate the wind characteristics of typhoon events. Several nonstationary wind speed models have been proposed by pioneers to characterize wind characteristics more accurately, but comparative studies on the applicability of the different wind models are still lacking. In this study, three landfall typhoons, Ampil, Jongdari, and Rumbia, recorded by ultrasonic anemometers atop the Shanghai World Financial Center (SWFC), are used for the comparative analysis of stationary and nonstationary wind characteristics. The time-varying mean is extracted with the discrete wavelet transform (DWT) method, and the time-varying standard deviation is calculated by the autoregressive moving average generalized autoregressive conditional heteroscedasticity (ARMA-GARCH) model. After extracting the time-varying trend, the longitudinal wind characteristics, e.g., the probability distribution, power spectral density (PSD), turbulence integral scale, turbulence intensity, gust factor, and peak factor, are comparatively analyzed based on the stationary wind speed model, time-varying mean wind speed model and time-varying standard deviation wind speed model. The comparative analysis of the different wind models emphasizes the significance of the nonstationary considerations in typhoon events. The time-varying standard deviation model can better identify the similarities among the different typhoons and appropriately describe the nonstationary wind characteristics of the typhoons.

• Journal of the Korean earth science society
• /
• v.23 no.6
• /
• pp.494-506
• /
• 2002

The Korean Standard-Time (KST) in practice is about 30 minutes earlier than Korea’s solar-time. Suitability of tile KST is analysed by whether it is suitable for the society in general and for the mental and physical health of the Korean people. About 56% of the countries in the world use single standard-time coincident, 18% are 30 minutes earlier, and 21% are an hour or more earlier than their solar-times, respectively, and only 5% have standard-times 30 minutes later than their solar-time. This means adoption of the standard-time earlier than the solar-time is rather acceptable in most countries without any harm to the mental and physical health of their people. Because Korea is located on the western margin of the I-time zone (which is used standard longitude of 135$^{\circ}$E and is used as KST), KST is about 30 minutes earlier than Korea’s solar-time. This situation does not seem to affect adversely the physical, physiological or psychological activities of the people of Korea. It also helps in effective use of the daily time schedule throughout the year, moreover it diminishes the necessity of the summer-time system in the Korea. If H$^{\ast}$-time of the longitude of 127.5$^{\circ}$E that passes through middle of the Korean peninsular is used as KST, non-integer time difference from UTC is inevitable which may be of great inconvenience, and also the introduction of a summer-time system like most countries in high latitude, using their standard-time coincidentally with or even earlier than their solar time, will become essential.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.22 no.10
• /
• pp.719-726
• /
• 2010

In this paper, the appropriate thermal storage time of an air-conditioning system with slab thermal storage was considered by use of summer measurement values. Two standards of heat extraction rate and criterion function were established as the standard that evaluates appropriateness. When heat extraction rate was a standard, zero hour and seven hours were obtained as appropriate thermal storage time, in the case of evaluation by energy consumption and running cost individually. Also, when criterion function was a standard, the difference between energy consumption and running cost was small, it was because the weight function to room air temperature deviation was much bigger than heat extraction rate.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.63-70
• /
• 2019

The subject of the simultaneous measuring system of base pattern and deposition pattern is a new research topic on a defect inspection of OLED. In this paper, we propose a new OLED inspection method that simultaneously measures standard and deposition pattern images. This method reduces unnecessary processes and tac time during OLED inspection. For an additional reduction of the tac time during pattern measurement, the ROI was configured to measure only in the designated ROI area instead of measuring the entire area of an image. During the ROI set-up, the value of effective deposition pattern area is included so that if the deposition pattern is out of the ROI zone, it would be treated as a defect before measuring the size and center point of the pattern. As a result, the tac time and inspection process could be shortened. The proposed method also could be applied to the OLED manufacturing process. Production of OLED could be increased by reducing tac time and inspection process.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.5 no.7
• /
• pp.59-62
• /
• 1982

The purpose of this paper is to increase the effectiveness of decreasing time - load and cost down in manufacturing company using the new way of regulating standard time - load. Let us take an example of K automobile factory. This company have avoided the used to way of regulating standard ti me load in staff members and increased the effectiveness of decreasing time - load having participated all members centering around the Q.C circle. Here, We can take conclusions as below. 1. We could improve the consciousness of question and the consciousness of efficiency progress as a result of new way. 2. We could encourage the activation of organization and working desire of all members to be participated.

• Journal of Distribution Science
• /
• v.14 no.12
• /
• pp.5-21
• /
• 2016

Purpose - This study aims to clarify the meanings of small enterprise and modify criteria for explaining its range. Prioritizing the number of full time workers first and the sales next are proper as a new concept and range. Research design, data, and methodology - In research, 'small company' is a basic concept because the range of its standard is categorized as a 'small company' in the policy system of small & medium business. This study focuses on the solutions with ① evaluation on sales, ② standard for excluded ones ③ regulation for excluded business types in 'Act on Protection and Support for Small Enterprise'. Results - Clarifying the range of standard with maintaining the title is advisable. The scope should resist the current criteria or adopt a new standard which contains not only full time workers but also the sales. The new one may raise the policies' effectiveness because it can sort the 1% people of small enterprises. Conclusions - However, there should be a preventive system for sorting out the non-eligible ones not conformed to the CAP for small company. Therefore, it is desirable to prepare the system with 'unsuitable ones list' or regulate large income·inappropriate business types in 'Act on protection and support for small enterprise'.