• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.983-991
• /
• 2021

The role of the distribution basin role is to apportion incoming raw water to the primary sedimentation basin as part of the water treatment process. The purpose of this study was to calculate the amount of water in the distribution basin using computational fluid dynamics (CFD) analysis and to find a way to improve any non-uniformity. We used the Taguchi method and the minitab tool as optimization methods. The results of the CFD calculation showed that the distribution flow had a deviation of 5% at the minimum inflow, 10% at the average inflow, and 22% at the maximum inflow. At maximum flow, the appropriate heights of the 7 weirs(C, D, A, B, E, F, G) were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, according to the Taguchi optimization tool. Here, the maximum deviation of the distribution amount was 9% and the standard deviation was 23.7. The appropriate heights of the 7 weirs, according to the Minitab tool, were 40 mm, 20 mm, 20 mm, 0, 0, 0, and 20 mm, respectively, for weirs C, D, A, B, E, F, and G. Therefore, the maximum deviation of the distribution amount was 8% and the standard deviation was 17.1, which was slightly improved compared to the Taguchi method.

• Communications for Statistical Applications and Methods
• /
• v.16 no.4
• /
• pp.707-711
• /
• 2009

We propose new cointegration tests using signs of the regressors as instrumental variable. Our tests have the asymptotic standard normal distribution and are free from the dimension of regressors under the null hypothesis of no cointegration. A Monte-Carlo simulation shows that the proposed tests have a stable size and an improved power. Particulary, the tests have better power for small numbers of observations.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.3
• /
• pp.130-135
• /
• 2001

In this paper, the distribution characteristics of salt contaminants with the distance from sea in East coast, from Sokcho to Pusan of Korea peninsula were investigated to evaluate the design standard of KEPCO. To get the equivalent salt deposit density(ESDD), conventional brush wiping method was used. As the measuring period is comparatively short, and the measuring interval is long to check the maximum value, acquired ESDD data is very lower than the recommended value in the standard. The measured data didn't follow normal distribution, so it should take the statistical treatment. Through normalizing method, we could get a reliable probability data. In the past investigation, the accumulation characteristics of Japan is consulted to set the criterion, but the climatic condition of Korea is different to Japan. With the comparison of precipitation data and some measured data for long tern accumulation, we could set appropriate accumulation factor.

• Journal of Distribution Science
• /
• v.20 no.4
• /
• pp.101-110
• /
• 2022

Purpose: This study is a comparative study to examine the differences between Incoterms 2010 and Incoterms 2010 through a study on the revision contents and conditions of Incoterms 2020. Research design, data, methodology: This study is composed of 5 chapters through literature study. Chapter 1 is an introduction, and Chapter 2 explains the significance and change of standard trading conditions. Chapter 3 compares Incoterms 2020 and 2010. Chapter 4 deals with major revisions and considerations of Incoterms 2020, and Chapter 5 mentions conclusions and implications. Results: In comparison with Incoterms 2020 and Incoterms 2010, first, the selection of the correct Incoterms rules was emphasized through the introduction; second, the division and connection between the sale contract and the ancillary contract were more clearly explained; and third, each Incoterms An explanatory note was presented by improving the existing guidance note for rules, and finally, the order of clauses within individual Incoterms rules was changed to further emphasize delivery and risk. Conclusions: This study pays attention to the understanding of academic content related to standard trade terms and conditions and how usefully it can be used in the business process of users in practice.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.8
• /
• pp.1117-1129
• /
• 2013

The sizing system for Korean Standard of Disposable Protective Coveralls (DPC) uses the ISO sizing system without modification even though the user suitability for Koreans is unverified. This study provides useful information to improve the size standard of Korean DPC by analyzing measurement DPC data from Korean men and women. The distribution of Korean measurements shows that the size sections were unsuitable for Korean men and women for a protective clothing size standard. Body types were categorized into five types based on a cluster analysis of representative men's and women's measurement factors. Two clusters mostly consisted of men, two other clusters mostly consisted of women, and the other cluster relatively evenly consisted of men and women. Therefore, characteristic body measurements and measurement distribution differences were identifiable for men and women. In conclusion, an unmodified ISO protective clothing size standard is unsuitable for Korean men and women and may cause fit problems. This study shows that a Korean Standard of protective clothing is beneficial for protective clothing manufacturers and wearers if smaller size intervals are added for women and the difference in the distribution of men and women is reflected in the current sizing system. ISO is appropriate to use a Korean Standard in this global era, however, it should be reviewed to provide improved Korean data.

• Journal of Distribution Science
• /
• v.13 no.7
• /
• pp.41-51
• /
• 2015

Purpose - This study analyzes loading efficiency by loading pattern for package standardization and reduction of logistics costs, along with the creation of revenue for the revenue review panel (RRP) of Membership Wholesale Clubs (MWC). The study aims to identify standard dimensions that can help improve the compatibility of the pallets related to display patterns preferred by the MWC and thereby explore ways to enhance logistics efficiency between manufacturers and retailers through standardization. Research design, data, and methodology - The study investigates and analyzes the current status based on actual case examples, i.e., manufacturer A and Korea's MWC (A company, B company, and C company), and thus devises improvement measures. To achieve this, the case of manufacturer A delivering to MWC was examined, and the actual pallet display patterns for each MWC were investigated by visiting each distribution site. In this study, TOPS (Total Optimization Packaging Software, USA) was used as the tool for pallet loading efficiency simulations the maximum allowable dimension was set to 0.0mm to prevent the pallet from falling outside the parameters, and the loading efficiency was analyzed with the pallet area. In other words, the study focused on dimensions (length x width x height) according to the research purpose and thereby deduced results. Results - The analysis of pallet loading patterns showed that the most preferred loading patterns for loading efficiency according to product specification, such as pinwheel, brick, and block patterns, were used in the case of the general distribution products, but the products were configured with block patterns in most cases when delivered to MWCs. The loading efficiency by loading pattern was analyzed with respect to 104 nationally listed standard dimensions. Meanwhile, No.51 (330 × 220mm) of KS T 1002 (1,100 × 1,100mm) was found to be the dimension that could bring about an improved loading efficiency, over 90.0% simultaneously in both the T-11 and T-12 pallet systems in a loading pattern configuration with the block pattern only, and the loading efficiency simulation results also confirmed this as the standard dimension that can be commonly applied to both the T-11 pallet (90.0%) and the T-12 pallet (90.7%) systems. Conclusions - The loading efficiency simulation results by loading pattern were analyzed: For the T-11 pallet system, 17 standard dimension sizes displayed the loading efficiency of 90.0% or more as block patterns, and the loading capacity was an average of 99.0%. For the T-12 pallet system, 35 standard dimension sizes displayed the loading efficiency of more than 90% as block patterns (the average loading efficiency of 98.6%). Accordingly, this study proposes that the standard dimensions of 17 sizes with the average loading efficiency of 99.0% should be applied in the use of the T-11 pallet system, and those of 35 sizes with the average loading efficiency of 98.6% should be reviewed and applied in the use of the T-12 pallet system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.4
• /
• pp.123-130
• /
• 2006

Airport facility is infrastructure that become external credit worthiness and linear measure of country competitive power. Among them, an airport electric power receiving and distribution facility is very important. In this paper, sorted domestic airline as 4 grades by code to accomplish standardization for airport electric power receiving and distribution facility. And established define and coverage about electric power receiving and distribution facility. And then analyze problem of existing airport and presents standardization. Finally, present standard single-line diagram by airport grade and system grade standard of airport electric power receiving and distribution facility

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.308-311
• /
• 2004

In this paper, we investigated $\phi-q-n$ distribution to inquire discharge characteristic according to variation of electrode. Also, we investigated Weible distribution of discharge number using Weible analysis to search the relationship between a part discharge and shape of electrode. We increased voltage 1[kV] AC 60[Hz] of impressed voltage, data is acquired a generating discharge for 10 seconds after impressing voltage. Also, as we repeated the experiment 10 times at same condition, analyzed foible using data except for maximum and minimum. As the result, we confirmed that discharge generating and discharge quantity were significantly increased narrowing radius of electrode, also discharge frequency was close to shape of a standard distribution.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.2
• /
• pp.161-168
• /
• 2018

In this study, IT based traceability system which is able to measure weight and moisture content of grain in the post-harvest process of intake, drying, storage and milling was developed in RPC(Rice processing complex). Measured information of weight, moisture content, yield, loss and quality was saved in the DB sever. Simultaneously, lot No. was generated and connecting to quality and traceability information. Also, automatic control system with MMI(Man Machine Interface) and yield and inventory control system(YICS) for grain was developed for the traceability system by applying the TCP/IP communication. In addition, simulation of system was performed for evaluation in RPC.

• Journal of Distribution Science
• /
• v.14 no.12
• /
• pp.5-21
• /
• 2016

Purpose - This study aims to clarify the meanings of small enterprise and modify criteria for explaining its range. Prioritizing the number of full time workers first and the sales next are proper as a new concept and range. Research design, data, and methodology - In research, 'small company' is a basic concept because the range of its standard is categorized as a 'small company' in the policy system of small & medium business. This study focuses on the solutions with ① evaluation on sales, ② standard for excluded ones ③ regulation for excluded business types in 'Act on Protection and Support for Small Enterprise'. Results - Clarifying the range of standard with maintaining the title is advisable. The scope should resist the current criteria or adopt a new standard which contains not only full time workers but also the sales. The new one may raise the policies' effectiveness because it can sort the 1% people of small enterprises. Conclusions - However, there should be a preventive system for sorting out the non-eligible ones not conformed to the CAP for small company. Therefore, it is desirable to prepare the system with 'unsuitable ones list' or regulate large income·inappropriate business types in 'Act on protection and support for small enterprise'.