• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.175-176
• /
• 2014

Identification and authentication of the security requirements of the application area. Individual ID for uniquely be identified. Standard length of the password is limited and should be applied in combination. And must be changed periodically. ID/PW authentication scheme non-reinforced must be provided. The authentication process is defined in the security requirements should be satisfied.

• Mass Spectrometry Letters
• /
• v.11 no.4
• /
• pp.108-112
• /
• 2020

A certified reference material (CRM) for the analysis of nutrient elements in an edible mushroom (Ganoderma lyceum) powder has been developed (KRISS CRM 108-10-011). The mass fractions of calcium (Ca), iron (Fe), and zinc (Zn) were measured by isotope dilution inductively coupled plasma mass spectrometry (ID ICP/MS). To dissolve the fungi cell wall of mushroom consisted of chitin fibers, sample preparation method by single reaction chamber type microwave-assisted acid digestion with acid mixtures was optimized. The mean measurement results obtained from 12 sample bottles were used to assign as the certified values for the CRM and the between-bottle homogeneities were evaluated from the relative standard deviations. The certified values were metrologically traceable to the definition of the kilogram in the International System of Units (SI). This CRM is expected to be used for validation of analytical methods or quality control of measurement results in analytical laboratories when they determine the mass fractions of elements in mushroom or other similar samples.

• The Journal of the Acoustical Society of Korea
• /
• v.28 no.7
• /
• pp.580-588
• /
• 2009

In this paper, we describe technical trends, standard activities, and upcoming issues relating on UHDTV audio, which requires high quality realistic sound. We also propose a proper solution to it for domestic broadcasting and telecommunication environments.

• MALSORI
• /
• no.21_24
• /
• pp.43-89
• /
• 1992

In this thesis, the prominent aspect of word accent in standard Korean is studied by auditory test and acoustic analysis experiment. The definition of 'accent' is, following Hoyoung Lee's discussion(1990), to be described as 'the means whereby a focused part of an utterance is made to stand out in order to concentrate the hearer's attention on it.' That is to say, the ten of 'accent' may be described in terms of phonological phenomenon and the accented syllable can be phonetically prominent as the result of those phonological process. Prosodic features may have different characteristics in different languages whether they contain linguistically important functions or not. Thus the characteristics of word accent in standard Korean will be determined as the content and trait of prosodic features. Following this viewpoint, present study looked over prosodic features which may effect the characteristics of word accent in standard Korean, through systematic experimental procedure. And the result of this experiment has been verified by statistical method, the T-test, for the purpose of identifying the relatedness among prosodic features(parameters). This thesis, therefore, aimed to investigate the intrinsic acoustic and physical qualities of the word accent in standard Korean. Nonsense words composed by 'mal' and 'ma' which can be divided into 'heavy syllable' and 'light syllable' quoted from Hyman(1975) have been classified into 28 types with respect to syllable numbers(2 syl., 3 sy1., 4 syl.) and these words have become the target of auditory test and acoustic experiment. As the result of those experimental Procedures, the word accent in standard Korean may be said that it has a tendency of fixing first two syllables regardless of syllable numbers. The syllable types of HH, HL, LL in the first two syllables may be prominent at first syllable and the type of H may be at second syllable. Various prosodic features(parameters) including duration, intensity, and Fo(purely phonetic terms) were also strengthened in those positions. The result of this experiment can be cleared up like these : 1. The most important feature is proved as 'duration', the feature of intensity resulted in more subsidiary one than the feature of duration. 2. Fo( fundamental frequency) could be observed as having some coherent contour through almost all syllable types(99 ％), that is, in 2 syllable types, it had rising contour, in 2 syllable types, rising-falling contour, and in 4 syllable types, it contained rising-falling-rising contour. The result of auditory test was different with those contour forms of all Fo surveyed. With respect to these results, the discuss for Fo is determined' to be excluded comparing other features. 3. Finally, this thesis resulted in a decision that the word accent in standard Korean may has fixed(somewhat weaker) accent, especially fixed at first two syllables in almost all words. 4. Various kinds of syllable types related with 2,3,4 syllables, therefore, can be reclassified into 4 types of HH, HL, LH, LL following the concept of accent fixing placement(i.e. first two syllables). In these 4 types, the types of HH, HL, LL were prominent at the position of the first syllable , and the type of LH was prominent at the second syllable otherwise.

• Korean Journal of Remote Sensing
• /
• v.26 no.5
• /
• pp.549-559
• /
• 2010

In geo-spatial information system building and operation, metadata is one of the crucial factors. Therefore, international and domestic organizations or associations for standardization have developed and distributed geo-based standard metadata to meet public demands. However, because metadata is composed of complicated elements and needs XML storage and management, individual organization which implement and operate practical application system is inclined to define and use its own metadata specifications. In this study, metadata extraction program, that metadata elements are directly extracted from geo-based file formats was developed to easily utilize standard metadata such as ISO/TC 19115, TTAS.KO-10.0139 and TTAS.IS-19115, and those elements are processed into XML. Furthermore, geo-based images sets are applied to another metadata of ISO/TC 19115-2. As well, metadata transformation is needed due to inconsistent or non-corresponding definition among standard metadata; in this program, transformation modules are also implemented to interoperable uses between standard metadata specifications. Widely used data formats are dealt with in this program, but extension for other formats and other metadata specifications is possible, and it is expected that availability of standard metadata is increased, through this kind of development.

• International Journal of Quality Innovation
• /
• v.9 no.3
• /
• pp.71-91
• /
• 2008

The definition of cycle time is the time from the wafer start to the wafer output. It usually takes one or two months to get the product since customer decides to produce it. The cycle time is a critical factor for customer satisfaction because it represents the response time to the market. Long cycle time reflects the ineffective investment for the capital. The cycle time is very important for foundry because long cycle time will cause customer unsatisfied and the order loss. Consequently, all of the foundries put lots of human source in the cycle time improvement. Usually, we make decisions based on the experience in the cycle time management. We have no mechanism or theory for cycle time management. We do work-in-process (WIP) management based on turn rate and standard WIP (STD WIP) set by experiences. But the experience didn't mean the optimal solution, when the situation changed, the cycle time or the standard WIP will also be changed. The experience will not always be applicable. If we only have the experience and no mechanism, management will not be work out. After interview several foundry fab managers, all of the fab can't reflect the situation. That is, all of them will have an impact period after product mix or utilization varied. In this study, we want to develop a formula for standard WIP and use statistical process control (SPC) concept to set WIP upper/lower limit level. When WIP exceed the limit level, it will trigger action plans to compensate WIP Profile. If WIP Profile balances, we don't need too much WIP. So WIP level could be reduced and cycle time also could be reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.2
• /
• pp.334-344
• /
• 2009

The EPCglobal Network is a system which provides the information of items to suppliers, consumers, and customers by granting identification numbers on the goods based on the technologies of EPC(Electronic Product Code) and RFID(Radio Frequency Identification), and connecting the space to store those information by network. The EPCglobal architecture framework is also a service consolidating supply and process chain by using EPC for the common goal of business corporations. In the national level, it is necessary to define standard vocabularies for each location and logistics business process for RFID environment using the pre-constructed logistics information infrastructure. Therefore, we define the standard vocabularies and partially user vocabularies for international logistics on EPCglobal network architecture. Finally, we believe that our vocabularies contribute to describing the events fur the EPCglobal network architecture and actually providing usable platform via the XML implementation.

• Journal of Digital Contents Society
• /
• v.19 no.8
• /
• pp.1593-1601
• /
• 2018

The International Hydrographic Organization has developed the S-100 standard as a geospatial standard to express various types of hydrographic information. Product specification describes information of data on ENC such as definition, structure, data model, etc. S-129 PS is for under keel clearance management information. In this paper, to help developers to implement S-129 PS using the technology of S-100, we analyze the process to portray the S-100 based data and then implement a case study. This paper introduces the XSLT processing of portrayal engine to reform the generated data set, and the generation of drawing instructions to display the data set on the electronic chart. A case study is experimented to display the portrayal output of under keel clearance management on an electronic chart.

• Journal of Engineering Education Research
• /
• v.10 no.3
• /
• pp.38-63
• /
• 2007

This study was aimed at the development of a standard model for vocational training course for the unemployed based on entrepreneurial skill system. The model reviewed the definition of skill-related concepts and skill system through the set-up of skill system in the first place, and developed job capacity system by coming up with the direction and the method in the development of the model for the job capacity system and training courses. Skill boundaries, core capacities, performances, capacity units and levels, and unit criteria were derived from it. And, training courses were composed and the structure was built in accordance with skill capacity system on the basis of it. As the result, the training model which drew to the development model of training courses, the structure of training courses and the model of training curriculum was finally developed.

• Journal of Broadcast Engineering
• /
• v.18 no.6
• /
• pp.816-822
• /
• 2013

The latest video coding standard HEVC was developed by the joint work of JCT-VC(Joint Collaborative Team on Video Coding) from ITU-T VCEG and ISO/IEC MPEG. The HEVC standard reduces the BD-Bitrate of about 50% compared with the H.264/AVC standard. However, using the various methods for obtaining the coding gains has increased complexity problems. The proposed method reduces the complexity of HEVC by using both CPU parallel processing and GPU-accelerated processing. The experiment result for UHD($3840{\times}2144$) video sequences achieves 15fps encoding/decoding performance by applying the proposed method. Sooner or later, we expect that the H/W speedup of data transfer rates between CPU and GPU will result in reducing the encoding/decoding times much more.