• Journal of Korean Society of Steel Construction
• /
• v.20 no.5
• /
• pp.633-644
• /
• 2008

The structural framework design uses high-strength bolts and welding in column splices. However, for the column under high compression, the number of the required high-strength bolts can be excessive and the increase of welding results in difficulty of quality inspection, the transformation of the structural steels, and the increase of erection time. According to the AISC criteria, when columns have bearing plates, or they are finished to bear at splices, there shall be sufficient connections to hold all parts securely in place. The Korean standard sets the maximum 25% of the load as criteria. Using direct contact makes it possible to transfer all compressive force through it. The objective of this study is to examine the generally applied stress path mechanism of welded or bolted columns and to verify the bending moment and compression transfer mechanism of the column splice according to metal touch precision. For this study,22 specimens of various geometric shapes were constructed according to the change in the variables for each column splice type, which includes the splice method, gap width, gap axis, presence or absence of splice material, and connector type. The results show that the application of each splice can be improved through the examination of the stress path mechanism upon metal contact. Moreover, the revision of the relative local code on direct contact needs to be reviewed properly for the economics and efficiency of the splices.

• Korean Journal of Clinical Pharmacy
• /
• v.30 no.1
• /
• pp.19-30
• /
• 2020

Objective: To describe patterns of spontaneous reporting on adverse events following immunization (AEFIs) using the human papilloma virus (HPV) vaccine according to the Brighton Collaboration (BC) criteria. Methods: We used the Korea Adverse Event Reporting System (KAERS) database including vaccinations between 2008 and 2017. To apply BC criteria, we classified 58 BC AEFIs into World Health Organization Adverse Reaction Terminology (WHO-ART) codes. We applied MedDRA standard medical queries that were pre-defined as five BC AEFIs. Terminology mapping between MedDRA and WHO-ART terms was performed by three researchers. Descriptive statistics of individual case safety reports were analyzed according to BC applicability. Disproportionality analyses were performed on each BC AEFI and each preferred AEFI term according to the case-noncase approach; reporting odds ratio (ROR) and 95% confidence intervals (CI) were calculated. Results: Among the 30,266 reports of vaccinations between 2008 and 2017, 2,845 reports included the HPV vaccine. Of these reports, 1,511 (53.1%) included at least one BC AEFI. Reports from physicians or manufacturers included more BC AEFIs than from other reporters. Injection site reactions and fever were frequently reported in BC AEFIs; spontaneous abortion and ectopic pregnancy (ROR, 14.29 [95% CI, 4.30-47.49]) and vasculitic peripheral neuropathy (ROR, 8.57 [95% CI, 2.61-28.10]) showed the highest ROR. Among non-BC AEFIs, dizziness or myalgia were frequently reported; exposure during pregnancy (ROR, 23.95 [95% CI, 16.27-35.25]) and inappropriate schedule of administration (ROR, 22.89 [95% CI, 16.74-31.31]) showed the highest ROR. Conclusion: BC criteria would be applicable for labeled AEFIs, whereas analyzing non-BC AEFIs would be useful for detecting unlabeled AEFIs.

• Spatial Information Research
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2015

The purpose of this study is to develope BIM Template according to major building material for efficiently and quantitatively evaluating greenhouse gas emission at the design stage. Template users consider various environmental impacts without connecting simulation tools for analyzing environmental impact and Template users who have no prior knowledge can Life Cycle Assessment by using The green template. For this study, Database which was reflected in template was constructed considering environmental performance. and 6 kinds of environmental impact categories and PPS standard construction codes were analyzed by major building material derived from literature. Based on this analyzed data, The major Material Family according to the main building material was developed. When users conduct modeling by utilizing Family established, evaluating result can be confirmed in the Revit BIM Modeling program by using the schedule function of the Revit. Users through the modeling, the decision-making environment performance possible. In addition, we propose to create a guideline for the steps required to build an additional established family.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8128-8139
• /
• 2015

Recently, the necessity of developing the load and resistance factor design(LRFD) for soft ground improvement method has been raised, since the limit state design is requested as international technical standard for the foundation of structures. In this study, to develop LRFD codes for foundation structures in Korea, target reliability index and resistance factor for static bearing capacity of driven steel pipe piles were calibrated in the framework of reliability theory. The 16 data(in Gwangyang) and the 57 data(Korea Institute of Construction Technology, 2008) sets of static load test and soil property tests conducted in the whole domestic area were collected along with available subsurface investigation results. The resistance bias factors were evaluated for the tow static design methods by comparing the representative measured bearing capacities with the expected design values. Reliability analysis was performed by two types of advanced methods : the First Order Reliability Method (FORM), and the Monte Carlo Simulation (MCS) method using resistance bias factor statistics. As a result, when target reliability indices of the driven pipe pile were selected as 2.0, 2.33, 2.5, resistance factor of two design methods for SPT N at pile tip less than 50 were evaluated as 0.611~0.684, 0.537~0.821 respectively, and STP N at pile tip more than 50 were evaluated as 0.545~0.608, 0.643~0.749 respectively. The result from this research will be useful for developing various foundations and soil structures under LRFD.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.27-35
• /
• 2009

This study was conducted to suggest resonable quality measurement methods of asphalt pavements to be used in the Pay adjustment. The Pay adjustment is a method to adjust the construction cost according to the pavement quality based on the statistic theories. Many U.S states use Pay adjustment and the PWL(Percent with in Limit) is calculated using their quality index tables. In this study, the application of PWL in Korea was evaluated by comparing the PWL South Carolina with the probability theories. The probability values and the PWL obtained using the data collected from the test roads were used to determine the pay factors suggested by AASHTO and the pay factors between them were closed to each other. In addition, the PWL was very similar to the probability obtained using the predicted average of the population when calculating the Z-values. The pay factors were obtained using artificial data whose average satisfied the codes and whose standard deviation was large. The pay factors were less than 100% in the quality measurements can be performed using the PWL methods, and with the development of the korea quality index table, the PWL methods can be applied in korea.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.67-78
• /
• 2004

Soil-steel bridges are made of flexible corrugated steel plates buried in the well-compacted granular soil. One kind of possible collapses of these structures could be initiated by shear or tension failure in the soil cover subjected to vehicle loads. Current design codes provide the requirements for the minimum depth of the soil cover to avoid problems associated with soil cover failures. However, these requirements were developed for short span (less than 7.7 m) structures which are made of unstiffened plates of standard corrugation (150$\times$50 m). Numerical analyses were carried out to investigate the behavior of long span soil steel bridges according to thickness of the soil cover. The span of structures were up to 20 m and deep corrugated plates (381$\times$140 m) were used. The analysis showed that the minimum cover depth of 1.5 m could be sufficient to prevent the soil cover failure in the structures with a span exceeding 10 m. Additional analyses were performed to verify the reinforcement effect of the concrete relieving slab which can be a special feature to reduce the live-load effects. Analyses revealed that the bending moment of the conduit wall with a relieving slab was less than 20% of that without a relieving slab in a case of shallow soil cover conditions.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.2
• /
• pp.26-32
• /
• 2008

Video compression schemes have been developed and used for many years. Currently, H.264/AVC is the most efficient video coding standard. The H.264/AVC baseline profile adopts CAVLC(Context-Adaptive Variable Length Coding) method as an entropy coding method. CAVLC gives better performance in compression ratios than conventional VLC(Variable Length Coding). However, because CAVLC decoder uses a lot of VLC tables, the CAVLC decoder requires a lot of area in terms of hardware. Conversely, since it must look up the VLC tables, it gives a worse performance in terms of software. In this paper, we propose a new hierarchical grouping method for the VLC tables. We can obtain an index of codes in the reconstructed VLC tables by simple arithmetic operations. In this method, the VLC tables are accessed just once in decoding a symbol. We modeled the proposed algorithm in C language, compiled under ARM ADS1.2 and simulated it with Armulator. Experimental results show that the proposed algorithm reduces execution time by about 80% and 15% compared with the H.264/AVC reference program JM(Joint Model) 10.2 and the arithmetic operation algorithm which is recently proposed, respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.22-30
• /
• 2011

In this paper, we propose a memory efficient multi-rate Low Density Parity Check (LDPC) decoder for China Mobile Multimedia Broadcasting (CMMB). We find the best trade-off between the performance and the circuit area by designing a partially parallel decoder which is capable of passing multiple messages in parallel. By designing an efficient address generation unit (AGU) with an index matrix, we could reduce both the amount of memory requirement and the complexity of computation. The proposed regular LDPC decoder was designed in Verilog HDL and was synthesized by Synopsys' Design Compiler using Chartered $0.18{\mu}m$ CMOS cell library. The synthesized design has the gate size of 455K (in NAND2). For the two code rates supported by CMMB, the rate-1/2 decoder has a throughput of 14.32 Mbps, and the rate-3/4 decoder has a throughput of 26.97 Mbps. Compared with a conventional LDPC for CMMB, our proposed design requires only 0.39% of the memory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3330-3335
• /
• 2010

Due to the acceleration of medical information age, the semantic interoperability of clinical information is rising up as a major issue. The laboratory results are known as the best significant area among clinical information to be required for exchanging and sharing. The aim of this research is to develop the clinical contents model for exchange laboratory results. This research was conducted from March 2008 to September 2008. Firstly, the method is to get the attributes and codes from LOINC which is one of the standard medical terminology system related to laboratory and the Reference Information Model(RIM) of Health Level 7(HL7). Secondly, the attributes from each work process around orders and reports of laboratory was analyzed. We evaluated the attributes whether they could be represented into the attributes contained in HL7's RIM. Thirdly, the prototype for hemoglobin case using the structure of clinical contents model and defined attribute. Fourthly, the face validity was done by one laboratory physician with four clinicians. The assessment contents were for the suitability involved in representation and exchange with proposed model. The results shows that the model corresponds with the aim of the research. Eventually the proposed model for the exchange of laboratory results could contributes to information interchange according to laboratory area for the future.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1649-1660
• /
• 2006

IIn the United States, professional dress codes for working women have changed over time since the 1970s. Considering the changes, from conservative and traditional business uniforms in the 1970s, business casual in the late 1980s through 1990s, and the current revival of tailored business suits, this study investigated working women's business jacket practices and their association with personal, psycho-social, and physical characteristics. Working women's job satisfaction and corporate culture were also examined in relation to business jacket practices. Research data were collected by implementing mail surveys to 1,500 randomly selected working women in the United States. Of the 1,500 distributed questionnaires, a total of 312 were returned, of which 265 were deemed usable, yielding a 20.8% response rate. For data analysis, descriptive statistics, such as frequency, percentage distribution, mean scores, standard deviations, and Canonical Correlation were tabulated. The respondents ranged in age from 22 to 65. The mean age of the respondents was 44 years(SD=9.63). Most respondents were married(77.4%), working full-time(81.4%), career-oriented (77.2%), Caucasian(89.8%), had at least one child(78.9%), and had a professional job(75.9%). Working women's age, number of children, self-confidence in dressing, perceived importance of clothing, body frame size, and visibility to superiors and public were positively associated with business jacket practices, while age of first child, family size, dress size, and job satisfaction were negatively associated with business jacket practices.