• Journal of Veterinary Clinics
• /
• v.19 no.3
• /
• pp.312-315
• /
• 2002

Diagnostic tests often require the determination of cut-off values that discriminate uninfected from infected individuals. The receiver operating characteristic (ROC) curve has been frequently used to attain this purpose and gives a representation of diagnostic accuracy (sensitivity and specificity) of a prediction model when varying the cut-point of a decision rule on a whole spectrum. We have written and tested a visual basic application program in EXCEL for maximum likelihood estimation of a binormal ROC curve, which also computes univariate statistics of a diagnostic test employed. Examples applying for computed tomographic images in radiology and methicillin-resistant Staphylococcus aureus research are given to illustrate this approach. This stand-alone module is available from the first author on request.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.40-51
• /
• 2021

In this paper, the design requirements was produced by analyzing domestic and foreign regulations of the vertical takeoff and landing site required to operate the urban air mobility (UAM) system in Korea and the size of the take-off and landing pads were defined, and the configuration of vertiport was proposed. First, for the metropolitan area with high population density, pilot locations of the vertical take-off and landing site were selected based on the demonstration routes suggested by the Ministry of Land, Infrastructure and Transport and analyzed the characteristics of each location and determined the number of possible installations of vertiport by measuring each site. After that, variables necessary for the operation of the vertical takeoff and landing area were set, and the hourly, daily, monthly aircraft operating cycle, the number of acceptable people, and efficiency were calculated according to the number of simultaneous operation and the number of stand. Finally, using CATIA, the configurations of the virtual vertiport was created by applying the design requirements.

• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.347-359
• /
• 2017

Blast resistant gates are required to be lightweight and able to mitigate extreme loading effect. This may be achieved through innovative design of a gate and its supporting frame. The first is well covered in literature while the latter is often overlooked. The design of supporting frame depends mainly on the boundary conditions and corresponding reaction forces. The later states the novelty and the aim of this paper, namely, the analysis of reaction forces in supporting structure of rectangular steel gates subjected to "far-field explosions". Flat steel plate was used as simplified gate structure, since the focus was on reaction forces rather than behaviour of gate itself. The analyses include both static and dynamic cases using analytical and numerical methods to emphasize the difference between both approaches, and provide some practical hints for engineers. The comprehensive study of reaction forces presented here, cover four different boundary conditions and three length to width ratios. Moreover, the effect of explosive charge and stand-off distance on reaction forces was also covered. The analyses presented can be used for a future design of a possible "blast absorbing supporting frame" which will increase the absorbing properties of the gate. This in return, may lead to lighter and more operational blast resistant gates.

• International Journal of Concrete Structures and Materials
• /
• v.7 no.1
• /
• pp.51-59
• /
• 2013

The use of light-gauge steel framing in low-rise commercial and industrial building construction has experienced a significant increase in recent years. In such construction, the wall framing is an assembly of cold-formed steel (CFS) studs held between top and bottom CFS tracks. Current construction methods utilize heavy hot-rolled steel sections, such as steel angles or hollow structural section tubes, to transfer the load from the end seats of the floor joist and/or from the load-bearing wall studs of the stories above to the supporting load-bearing wall below. The use of hot rolled steel elements results in significant increase in construction cost and time. Such heavy steel elements would be unnecessary if the concrete slab thickening on top of the CFS wall can be made to act compositely with the CFS track. Composite action can be achieved by attaching stand-off screws to the track and encapsulating the screw shank in the deck concrete. A series of experimental studies were performed on full-scale test specimens representing concrete/CFS flexural elements under gravity loads. The studies were designed to investigate the structural performance of concrete/CFS simple beams and concrete/CFS continuous headers. The results indicate that concrete/CFS composite flexural elements are feasible and their structural behavior can be modeled with reasonable accuracy.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.4
• /
• pp.127-138
• /
• 2008

To study about core capability which becomes the kernel of sustainable competitive advantage (SCA) in cyber university which confronts competition-deepening circumstance, the value and importance of brand and educational services of cyber universities which stand on the basis of offline university were examined. Moreover, core capability based on the importance of cyber university service was searched, and its strategic course were suggested. Within research processes, competition environment of cyber university was forecasted, and importance to build up its core capability was examined. Moreover, conjoint analysis was carried out for three offline cyber universities. As a result of survey analysis, effectiveness of cyber university brand showed greater influence than other characteristics in terms of the influence which affects consumer preference for cyber university. Therefore, to overcome weaknesses of brand asset in low brand power cyber university, establishment of strong core capability which reflects consumer preference is needed to carry out differentiation strategy or concentration strategy, and it is necessary to consider the introduction of new competitiveness structure.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.113-118
• /
• 2004

This paper presents a two-dimensional edge tone to predict the frequency characteristics of the discrete oscillations of a jet-edge feedback cycle by the finite difference lattice Boltzmann method (FDLBM). We use a new lattice BGK compressible fluid model that has an additional term and allow larger time increment comparing the conventional FDLBM, and also use a boundary fitted coordinates. The jet is chosen long enough in order to guarantee the parabolic velocity profile of the jet at the outlet, and the edge consists of a wedge with an angle of $\alpha=23^0$. At a stand-off distance $\omega$, the edge is inserted along the centreline of the jet, and a sinuous instability wave with real frequency f is assumed to be created in the vicinity of the nozzle and th propagate towards the downstream. We have succeeded in capturing very small pressure fluctuations result from periodically oscillation of jet around the edge. That pressure fluctuations propagate with the sound speed. Its interaction with the wedge produces an irrotational feedback field which, near the nozzle exit, is a periodic transverse flow producing the singularities at the nozzle lips. The lattice BGK model for compressible fluids is shown to be one of powerful tool for computing sound generation and propagation for a wide range of flows.

• Explosives and Blasting
• /
• v.23 no.4
• /
• pp.45-55
• /
• 2005

일반적 의미의 성형폭약이라 함은 폭약 중에 빈공간이 존재하여 표면쪽으로 개방되어 있는 한덩이의 고폭약을 말한다. 이런 이유로 절단 단면의 형상은 주로 V 자형을 이루고 있으며 보통 V자의 뽀족한 부분이 기폭부분이 된다. 성형폭약은 그 생김새를 기준으로 크게 2가지로 나눌 수가 있는데 원뿔형과 선형이 그것이다. 원뿔형 성형폭약은 그 초기 발전단계부터 군용 대장갑용으로 명성을 떨쳤으며 현재에도 많은 연구가 진행되고 있는 상태이다. 이에 비해 선형 성형폭약은 철구조물 해체나 여러 용도의 민간/상업용 절단도구로 많이 쓰이고 있는데 두 번의 세계전쟁을 치루며 엄청난 규모의 물질적 인적 지원을 바탕으로 발전한 원뿔형 성형폭약에 비해서 턱없이 연구실적이 부족한 상태이다. 이 논문에서는 일반적인 선형 성형폭약의 관통력에 대한 연구가 아닌 기능적 측면에 대한 연구결과를 서술하며, 기능적 측면상 중요한 몇 개의 항목에 대한 수량화, 정의 및 연구가 이루어진다. 그 항목으로는 발전거리(run up distance), 이격거리(stand off distance), 기폭위치에 따른 절단모양, 파편 분간 형상 등이 있으며 각 항목에 대한 하류 항목들은 본문에서 다루어진다. 모든 실험은 University of Missouri-Rolla, Rock Mechanics and Explosives Research Center 에서 이루어 졌으며 대부분의 실험은 500grain/ft 선형성형폭약을 사용하여, 기폭 후 철제목표물을 관통한 형상 및 관통 단면을 관찰하는 형식으로 이루어졌다.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.285-288
• /
• 2005

We propose a novel programmable miniature vision module based on a custom designed analog VLSI (aVLSI) chip. The vision module consists of the optical flow vision sensor embedded with commercial off-the-shelves digital hardware; in our case is the Intel XScale PXA270 processor enforced with a programmable gate array device. The aVLSI sensor provides gray-scale imager data as well as smooth optical flow estimates, thus each pixel gives a triplet of information that can be continuously read out as three independent images. The particular computational architecture of the custom designed sensor, which is fully parallel and also analog, allows for efficient real-time estimations of the smooth optical flow. The Intel XScale PXA270 controls the sensor read-out and furthermore allows, together with the programmable gate array, for additional higher level processing of the intensity image and optical flow data. It also provides the necessary standard interface such that the module can be easily programmed and integrated into different vision systems, or even form a complete stand-alone vision system itself. The low power consumption, small size and flexible interface of the proposed vision module suggests that it could be particularly well suited as a vision system in an autonomous robotics platform and especially well suited for educational projects in the robotic sciences.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.4
• /
• pp.568-576
• /
• 2017

This paper presents a clock and data recovery circuit with an adaptive loop bandwidth calibration scheme and the idle power saved frequency acquisition. The loop bandwidth calibration adaptively controls injection currents of the main loop with a trimmable bandgap reference circuit and trains the VCO to operate in the linear frequency control range. For stand-by power reduction of the phase detector, a clock gating circuit blocks 8-phase clock signals from the VCO and cuts off the current paths of current mode D-flip flops and latches during the frequency acquisition. 77.96% reduction has been accomplished in idle power consumption of the phase detector. In the jitter experiment, the proposed scheme reduces the jitter tolerance variation from 0.45-UI to 0.2-UI at 1-MHz as compared with the conventional circuit.

• Transactions of Materials Processing
• /
• v.22 no.2
• /
• pp.74-79
• /
• 2013

The ultra-precision polishing method using MR fluid has come into the spotlight for polishing metals and optical materials. The MR fluid jet polishing process can be controlled using a change of viscosity by an imposed magnetic field. The MR fluid used for polishing process is a mixture of CI particles, DI water, $Na_2CO_3$ and glycerin. The efficiency of polishing depends on parameters such as polishing time, magnetic field, stand-off distance, pressure, etc. In this paper, the MR fluid jet polishing was used to polish nickel and brass mold materials, which is used to fabricate backlight units for 3-D optical devices in mobile display industries. In MR jet polishing, ferromagnetic materials like nickel can decrease the polishing efficiency by interaction with the cohesiveness of the MR fluid more than non-ferromagnetic materials like copper. A series of tests with different polishing times showed that the surface roughness of brass (Ra=1.84 nm) was lower than that of nickel (Ra=2.31 nm) after polishing for 20 minutes.