• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.421-426
• /
• 2015

The objective of this paper is to look into the growth of Cryptomeria japonica stand in South Korea along with the evaluation on their yields, followed by their carbon stocks and removals. A total of 106 sample plots were selected from Jeonnam, Gyeongnam, and Jeju, where the groups of standard are grown. We only used 92 plots data except outlier. As part of the analysis, the Weibull diameter distribution was applied. In order to estimate the diameter distribution, the growth estimation equation for each of the growth factors including the height, the diameter at breast height, and the basal area was drafted out and the verification for each equation was examined. The site index for figuring out the forest productivity of Cryptomeria japonica stand for each district was also developed as a Schumacher model and 30yr was used as a reference age for the estimation of the site index. It was found that the site index for Cryptomeria japonica stand in South Korea ranges from 10 to 16 and this result was used as a standard for developing the stand yield table. According to the site 14 in the stand yield table, the mean annual increment (MAI) of the Cryptomeria japonica reaches $7.6m^3/ha$ on its 25yr and its growing stock is estimated to be at $190.1m^3/ha$. This volume is about $20m^3$ as high as that of the Chamaesyparis obtusa. Furthermore, the annual carbon absorptions for a Cryptomeria japonica stand reached the peak at 25yr, which is 2.14 tC/ha/yr, $7.83tCO_2/ha/yr$. When compared to the other conifers, this rate is slightly higher than that of a Chamaecyparis obtusa ($7.5tCO_2/ha/yr$) but lower than that of the Pinus koraiensis ($10.4tCO_2/ha/yr$) and Larix kaempferi ($11.2tCO_2/ha/yr$). With such research result as a base, it is necessary to come up with the ways to enhance the utilization of Cryptomeria japonica as timbers, besides making use of their growth data.

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.536-542
• /
• 2015

This study was examined for the growth response of tree diameter and volume to thinning treatments from different thinning intensities using three long-term thinning trials for Japanese Evergreen Oak (Quercus acuta Thunb.) stands in Wando island, Korea. After thinning in 1999, annual tree growth of diameter and volume was highest in heavy thinned stands for individual tree and this growth pattern of thinning response showed similar tendency to the individual tree growth response in light thinned stands. By increasing diameter growth, the value of H/D ratio (HDR) as an indicator of stem form was properly decreased and improved up to 80%. Although there is significant growth response of basal area in both heavily and lightly thinned stands, the growth potential both of heavily and lightly thinned stands in total stand volume is not likely to reach at the level of unthinned stands because of basal area growth loss associated with both light and heavy thinnings.

• Journal of Korean Society of Forest Science
• /
• v.74 no.1
• /
• pp.82-87
• /
• 1986

Noticed that large number of the Korean white pine (Pinus koraiensis S. et Z.) has lost its typical excurrent tree from by removal of apical shoot in the process of cone harvesting, the investigation and analysis for the species were made on the basis of the relationship among DBH, total height, merchantable height, and merchantable volume, compared with normally grown Japanese larch (Larix leptolepis Gordon). One hundred sample trees for each species were selected in the same aged stands for the study. Results have indicated that the pine has shown abnormal height growth pattern mainly by the disturbance of external artificial force. The pine's forked and/or crooked stems by the reason lave led the result of less merchantable volume in the same DBH classes. Consequently, the pine would have undesirable tree form in terms of timber production, unless free from apical shoot disturbances. Considered to the merit of the Korean white pine that can produce timber and pine nuts, management alternatives for the pine stand were suggested to achieve maximum rate of return for the silvicultural investment.

• Journal of Korean Society of Forest Science
• /
• v.95 no.4
• /
• pp.443-452
• /
• 2006

This study was conducted to investigate the site and growth characteristics of Mackia amurensis stand in natural forest of Mt. Joongwang, Pyongchang-Gun, Gangwon-Do, Korea. The 28 sample plots ($30m{\times}30m$) were established to examine the vegetation and site characteristics for M. amurensis stand. Stem analysis was performed on two sample trees for each of the 5 plots situated at intervals of 100 m by altitude. M. amurensis trees were mainly distributed at the ridge and the slope facing north, with altitudes ranging from 790 to 1,170 m. The M. amurensis grew at relatively deep A-layer of soil with high moisture but infertile. Dominant species with M. amurensis were Quercus mongolica, Fraxinus rhynchophylla, Acer pseudo-sieboldianum, A. pictum subsp. mono, Ulmus davidiana var., japonica, Tilia amurensis, and Populus davidiana. TWINSPAN classified four communities in Mt. Joongwang area; M. amurensis-P. davidiana community (xeric type), M. amurensis-U. davidiana var. japonica community (xeric type), M. amurensis-T. amurensis community (moist type), and M. amurensis-Styrax obassia community (moist type). According to the community type, trees per ha were more abundant in the area of the moist types than the xeric types. Height growth of M. amurensis increased with increasing ages until 10 years, and then decreased thereafter, especially at altitude of 1,020m. M. amurensis showed rapid early growth of height and volume, indicating possible high biomass production under enough light. Growth of M. amurensis increased greatly at about 40 years if released from severe competitions. The rotation age of natural M. amurensis stand was expected for above 50 years.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.17 no.3
• /
• pp.207-216
• /
• 2015

The study was conducted to determine the effects of forest restoration methods and stand structure on solar radiation, air temperature, relative humidity, soil temperature, and soil water content, based on volume, in forest stand after forest fire. The changes of the micro-climate elements in naturally and artificially restored forest after forest fire were measured in Goseong and Samcheok, Gangwon province. Pinus spp. were commonly appeared in ridges, barren lands or planted areas of the study sites while the other areas were dominated by Quercus spp. In the early stage, trees in the naturally regenerated site grow better than the trees in artificially rehabilitated site. However, the growth ratio rapidly decreased by time passed in natural regeneration area. The environmental conditions (solar radiation, air temperature, relative humidity, soil temperature and soil water content) were significantly different by the regions and the methods (p<.05). However, the coefficients of variations of the environmental conditions were not significantly different at 95% confidence level. As the coverage and tree height in crown layer increased, the relative humidity and soil water content were increased while the temperature and solar radiation were decreased. Especially, the relative humidity, solar radiation, and soil water content were clearly affected by the tree height and coverage ratio ($R^2$ means from 0.628 to 0.924). Even though the data should have collected at least more than 5 years in meteorological analysis, the two year results show some clear relationship between forest structure and microclimate elements.

• Journal of Korean Society of Forest Science
• /
• v.90 no.6
• /
• pp.725-733
• /
• 2001

In this study, the relationship between growth factors for Pinus densiflora stands in Anmyun-Island was analyzed and dynamic growth model was prepared. A total of 96 sample plots was investigated in which dbh and height of individual trees were measured. From these plot data, quadratic mean dbh, mean height, dominant tree height, stem number per ha, basal area per ha and volume per ha were estimated. Several regression equations between growth factors were derived using NLIN and REG procedure of SAS. And dynamic growth model, in which the equations were interactively linked, was prepared for the prediction of stand growth and yield under different management regime. The predictions of dynamic growth model were found to be coincided with general growth principles. The dynamic growth model was considered as adequate for predicting growth and yield of Pinus densiflora stand in Anmyun-Island. In practice, the dynamic growth model can be applied for predicting the growth and development of stand for various forest treatments and for decision-making in forest management.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.4
• /
• pp.24-30
• /
• 2017

Obstacle defines all fixed and mobile objects, or parts thereof, that are located on an area intended for the surface movement of aircraft or extend above a defined surface intended to protect aircraft in flight or stand outside those defined surfaces and that have been assessed as being a hazard to air navigation. Aircraft operations are based on electronic supporting systems using radio frequencies to assist pilots. These frequencies can receive outside interference that change their courses or power, such as distortion, attenuation or reinforcements by an obstacle. This is a preliminary case study that shows the relation of instrument flight procedures and the degree of interferences introduced by a planned obstacle, which is a main bridge post, within the service volume of the radio navigation aids. For the purpose of this study, the case airport's data and it's VOR/DME and ILS systems' limitations are analyzed, as well as the relation of interferences between the obstacle and navigation aides were reviewed with the internal regulations in Korea.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.1
• /
• pp.103-109
• /
• 2013

The conventional LCL filter design method of the utility interactive inverter considers only harmonics attenuation of the current injected to the grid. However, in case of utility-interactive inverter with critical load the voltage quality of the critical load should also be considered for LCL filter design. Also, considering cost and volume of LCL filters. it is important to have minimum values of inductance and capacitance as far as the harmonic standards are satisfied. In this paper a LCL filter design method is proposed to satisfy not only the harmonic standards of the grid current during the grid-connected mode but the voltage quality of the critical load during grid-connected mode and stand-alone mode. With the proposed method optimized values of LCL filters could be obtained by applying weighting factor to voltage ripple across the critical load, inductor volume, amount of reactive current and system bandwidth.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.804-805
• /
• 2006

Electric scroll-compressor drives are commonly used for e.g. home appliance cooling units. The recent development of hybrid cars with internal combustion engine in combination with electrical propulsion requires new solutions to be able to cool the passenger compartment of cars at stand-still. Both application areas demand efficient motor drives to reach good economy and efficient use of limited battery power as well as competitive volume/weight for a given output. The BLDC motor is a controllable and efficient solution. A major part of the motor is the soft-magnetic core. The powder based $Somaloy^{(R)}$ material shows high resistivity and induction as the result of engineered iron particles with in-organic coating. The unique features of compacted $Somaloy^{(R)}$ components can be utilized to enhance the shape and total volume of the BLDC motor with at least maintained efficiency compared to the use of traditional laminated steel sheet cores. A careful design of the $Somaloy^{(R)}$ components can also simplify assembly and positively influence the coil configuration. This study shows a comparison between a typical laminated BLDC motor and a redesigned, $Somaloy^{(R)}$ based version adapted for a scroll-compressor application.

• Journal of Korean Society of Forest Science
• /
• v.74 no.1
• /
• pp.67-81
• /
• 1986

To investigate the stand structure of the stocked broad-leaved forests in Korea, 1,000 plots, allocated by systematic sampling method, were interpreted on the aerial photographs accompanied with ground survey. Total area of the stocked broad-leaved forests except Jeju island was 818,286ha and the percentage to total forest area was 12.7%. Total stock volume of the stocked broad-leaved forests was $38,890,779m^3$ and the percentage to total stocked forest volume was 27.4%. Mean number of trees per ha was 947 trees/ha, basal area was $11.17m^3/ha$, DBH was 11.30cm, tree height was 7.65m, stock volume was $44.96m^3/ha$, and current annual volume increment was $3.64m^3/ha$ in total land. The 64.7, 79.8 and 52.7 percent of the stocked broad-leaved forest area were distributed at elevations of 300-900m, in slope degree of above 25, and in northern aspect, respectively. Standfactors were apt to get better with the increase of distance from the car road way and the village, and with the increase of elevation belt.