• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2010년도 춘계 학술논문 발표대회 1부
• /
• pp.101-104
• /
• 2010

Development and practical emerging construction technologies has been studied as one of key solution for overcoming these barriers. Many literatures indicated that effective performance evaluation methodologies are demanding for efficient applications of new technologies. This paper presents a performance evaluation methodology using construction simulation technique and introduces studies of two cases where the steel staircase system, as an new technologies was applied and where the conventional method of staircase concrete works. Productivity was measured and calculated by site observation and construction simulations. This results show the quantified influence of new technology to site personnels and assist them to make various decisions for using or not using the technology depending on their own situations.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1146-1153
• /
• 2022

As the population is aging, accidents involving elderly people are also increasing (2014:11,667 persons; 2018: 11,797 persons). In the case of the elderly population, falling accidents are the primary direct or indirect causes of death; in particular, they face an elevated risk of staircase falls. This study proposes a method of evaluating the safety of staircases using Building Information Modeling (BIM)-based virtual simulation. By making a virtual user with the behavioral characteristics of the elderly respond to a staircase in a BIM model, its safety performance can be evaluated. The evaluation criteria were derived from regulations, elements, and characteristics relevant to the safety of staircases. To validate the proposed method, safety evaluation tests were simulated on actual staircases. The evaluation result of the test simulation shows the safety scores of 1.97 points for the elderly user and 2.95 points for the average male adult user against a required safety score of a minimum of 2 points. That is, safety is relative to users as the safety of the same staircase can be different depending upon the different behavioral characteristics of users. The study suggests that the risk of staircase-related fall accidents to the elderly can be reduced by improving staircase designs through the proposed method.

• 건축역사연구
• /
• 제21권1호
• /
• pp.99-118
• /
• 2012

This study aims to classify the architectural formation of the Stylobate of and Staircase types of Post-Lintel Construction in Backje style and Silla style and also to figure out their specific elements by periods and transformation characteristics. The scope of this study was restricted to architectural remains between the Three Kingdom period and the Goryeo period. To progress the investigation, the study classified remains in a similar type by period and type, and then and analyzed its character based on formation method and specific factors of subsidiary materials. As a result, its type can be classified as Backje type(I), Silla type(II) and Mixed type(III). Regionally, it is found that Woongjin, Sabi and surroundings in the capital of Backje, Gyeongju and main towns in the capital of Silla, and Gaeseong and main towns in the capital of Goryeo. In particular, type III has the characteristics of type I and II simultaneously, which has one or two layers Jangdaeseok stone between the foundation stone of stylobate and plate stone, and tends to be decorative when Taengjuseok stone is installed. For types of staircase, it could be classified as 6~7C Backje type(I), 7~9C Silla type(II) and 9C Mixed type(III) according to the formation method of Somaetdol (banister of stone stair). And from the 9th century on, decorated Somaetdol stone type(IV) of 1/4 circle shape began to appear. The common feature of stylobate of post-lintel and staircase is that it became simplified, abbreviated and decorative. It seems to be intended to secure simplicity of construction or structural stability.

• 한국건축시공학회지
• /
• 제14권6호
• /
• pp.571-581
• /
• 2014

본 연구에서는 중공 PC 벽체 (PC Double Wall)를 적용한 계단실 공법을 개발하였다. 중공 PC 벽체는 내부 중공으로 인하여 양중 무게를 줄이고 외부 벽체가 거푸집 역할을 하며, 벽체 내부 중공에 현장 콘크리트를 타설하여 기존 PC 벽체와 비교하여 부재간의 일체성 확보가 우수하다. PC Double Wall 제작 및 현장 콘크리트 타설, 구조적 안전성을 고려하여 PC 벽체 단면과 철근 배근 상세를 제안하였다. 제안 상세를 바탕으로 얇은 PC벽체와 중공부를 효과적으로 형성하기 위한 세움 타설 방식의 거푸집 시스템을 개발하였다. PC Double Wall을 이용하여 계단실 Mock-up test를 통하여 부재 간 일체성과 시공성을 검증하였으며, 부재 간 접합부의 변형 및 균열이 발생하지 않고 시공성이 우수한 것으로 나타났다.

• 한국주거학회논문집
• /
• 제19권5호
• /
• pp.103-110
• /
• 2008

The purpose of this study is to know how visual-field obstruction from fire smoke influences a resident's necessary time to reach fire escape and evacuation movement in a high-rise apartment housing. Generally, fire smoke not only gives visual-field obstruction and breath troubles to residents but interrupts their evacuation behavior. If a fire smoke layer is formed in the core department when evacuee enters at the evacuation staircase until, residents will be made to undergo a range of vision obstacle. In order to set a situation like that, participants wore eye bandage which had been made especially before the experiment. Also as a comparative standard, through no.1442 Japanese construction ministry notices about the building evacuation safety verification method, this study calculated smoke layer's dissent time and evacuation time. Then to compare with the former, the participants without an eye bandage joined a experiment once again. This study has understood how fire smoke effects on one's evacuation delay by analyzing residents' evacuation time to reach the staircase and movement route, however, in this study a toxic gas is not considered because it might threaten participants not to breathe.

• 대한건축학회논문집:계획계
• /
• 제35권11호
• /
• pp.43-52
• /
• 2019

The purpose of this study is to suggest the use of modular construction method in order to promote the dissemination of the Health Life Support Center of the government, and to suggest the modular unitification and modularization plan for the necessary space data in the initial stage. By analyzing the floor plans of the 50 case projects currently in operation, the 28 required spaces and their spatial proximities are determined. Base on spatial proximities, each space is unitificated into a modular unit and modularized into a modular modules were integrated to modular proposals. As a result of this study, 13 unitificated modular unit floor planes and 3 modularized module floor planes including the staircase unit were proposed. However, future study have needed to study how to apply them to different actual sites and how to reduce cost.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.31-36
• /
• 2003

In case of this thick rolling-steel for a multistory building, a large oil-drilling structure, a large vessel, a bridge and so on, Lamella Tearing around the welded joint zone is the most serious problems. In order to prevent Lamella Tearing, not only is choice of material important, but also the comprehensive investigation for the structural design and the construction. The Lamella Tearing that is a staircase-shape occurs due to the contraction stress to the thickness direction of the plate and has the character that the cracks progress along the elongated inclusion by rolling. In general, because cracks occur at the heat affected zone and around HAZ, it is necessary to establish the safety and the confidence of the welded structure to restrain the welding defect such as Lamella Tearing. The mechanical approaches are the easier and more economical than the approaches of the material and the construction method. In addition, the appropriate welding profile and the optimum welding condition contribute toward the improvement of the productivity and influence on the standardization of the manufacturing technology.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.301-304
• /
• 2008

선시공 조립식 거푸집 공법을 사용한 계단의 접합부는 힌지로 처리하여 구조설계를 하는 것이 일반적인 방법이다. 계단참과 경사계단이 만나는 접합부를 힌지로 간주하게 되면 접합부의 모멘트 성능이 전혀 없으므로 계단부분의 휨모멘트가 증가하게 되어 철근 배근량이 늘어난다. 또한 진동 및 피로하중에 의한 접합부 손실이 증가하여 사용성이 저하된다. 그럼에도 불구하고 계단 접합부를 핀접합하는 이유는 현장에서의 시공성이 용이하기 때문이다. 최근들어 시공성을 고려하면서 접합부의 휨성능을 향상시킬 수 있는 반강접에 대한 상세가 제시되고 있으나, 이러한 상세를 구조설계에 전혀 반영하지는 못하고 있다. 따라서 본 연구에서는 계단의 반강접 접합부를 설계에 반영할 수 있는 방법을 제시하고자 하였다. 강접합, 반강접합, 핀접합으로 설계된 계단 접합부에 대해 모멘트 성능을 비교하고, 부정정 구조물인 계단 코아부분의 비선형 해석을 통해 항복 이후의 변화를 비교하였다. 연구결과 반강접합 성능을 반영하기 위한 휨강성계수를 도입하였고, 이를 적용한 비선형 해석결과 핀접합보다는 안정적인 결과를 보였고, 강접합에 비해 연성이 뛰어나 내진 및 진동에 대해 유리한 시스템으로 판단된다.

• 한국건축시공학회지
• /
• 제18권4호
• /
• pp.363-373
• /
• 2018

고층 공동주택에서 화재시 현관문을 통해 탈출이 불가능할 경우를 대비해 발코니를 통해 피난이 가능하도록 피난시설을 설치한다. 이는 공동주택 세대의 양방향 피난이 가능하게 하며, 이로 인해 인명피해를 줄일 수 있다. 본 연구에서는 양방향 피난시설인 경량 칸막이, 발코니 대피 공간, 실내형 하향식 피난구의 특징을 살펴보고 이들의 문제점을 개선한 실외형 하향식 피난구를 제시하고 경제성에 대해 분석하였다. 화재 발생 시 피난자는 전통식 피난구를 사용할 때보다 하향식 피난구를 사용할 때 능동적인 탈출 가능 여부를 더 자율적으로 판단 할 수 있다. 따라서 피난자의 피난방식에 따라 피난소요시간에 미치는 영향을 고려하여 계단식과 하향식 피난구를 통한 4가지 피난방식의 피난 소요시간은 시뮬레이션 pathfinder를 활용하여 비교분석하였다. 피난 소요 시간 단축을 위한 적합한 대피방식을 예측 분석 판단하였다. 본 연구의 결과 고층 아파트 하향식 피난구는 계단식보다 총 피난소요시간을 단축할 수 있는 것으로 분석되었다.