• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.169-172
• /
• 2004

The effect of the process parameters on the stable lifetime in rapid thermal firing(RTF) was investigated in order to optimize the process for the Cz-silicon. The process temperature was varied between $700^{\circ}C\;and\;950^{\circ}C$ while the process time was chosen 1 s and 10 s. At below $850^{\circ}C$ the stable lifetime for 10 s is higher than that for 1 s and increases with increasing by the process temperature. However, at over $850^{\circ}C$ the improved stable lifetime is not dependent on the process time and temperature. On the other hand, two high temperature processes in solar cell fabrics are combined with the optimized process and the non-optimized process. The last process determines the stable lifetime. Also, the degraded stable lifetime could be increased by processing in optimized process. The decreased lifetime can increase using the optimized oxidation process, which is a final process in solar cells. Finally, the optimized and non-optimized processes are applied solar cells.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.215-218
• /
• 2009

In this paper, temperature stable current and voltage references using simple CMOS bias circuit are proposed. To obtain temperature stable characteristics of bias circuit a bandgap reference concept is used in a conventional circuit. The parasitic bipolar transistors or MOS transistors having different threshold voltage are required in a bandgap reference. Thereby the chip area increase or the extra CMOS process is required compared to a standard CMOS process. The proposed reference circuit can be integrated on a single chip by a standard CMOS process without the extra CMOS process. From the simulation results, the reference current variation is less than ${\pm}$0.44% over a temperature range from - $20^{\circ}C$ to $80^{\circ}C$. And the voltage variation is from - 0.02% to 0.1%.

• 한국수소및신에너지학회논문집
• /
• 제18권1호
• /
• pp.12-25
• /
• 2007

Numerical simulation of the natural gas steam reforming process for on-site hydrogen production in a $H_2$ fueling station was conducted on the basis of process material and heat balances. The effects of reforming parameters on the process efficiency of hydrogen production were investigated, and set-point values of each of the parameters to minimize the sizes of unit process equipments and to secure a stable operability of the reforming process were suggested. S/C ratio of the reforming reactants was found to be a crucial parameter in the reforming process mostly governing both the hydrogen production efficiency and the stable operability of the process. The operation of the process was regarded to be stable if the feed water(WR) as a reforming reactant could evaporate completely to dry steam through HRSG. The optimum S/C ratio was 3.0 where the process efficiency of hydrogen production was maximized and the stable operability of the process was secured. The optimum feed rates of natural gas(NGR) and WR as reforming reactants and natural gas(NGB) as a burner fuel were also determined for the hydrogen production rate of $27\;Nm^3/h$.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2001년도 춘계학술대회논문집:21세기 신지식정보의 창출
• /
• pp.64-76
• /
• 2001

In this paper, A simple image hologram encryption and decryption technique based on the principle of interference are proposed. The technique using the photorefractive material for getting a stable interference pattern is also proposed. And combine these two techniques, I would like to implement a stable optical information security system. In the encrypting process, I would generate binary phase hologram which can reconstruct original image perfectly, and regard this hologram as original image to be encrypted image. And then the hologram is encrypted as randomly generated binary phase image. Reference image is also generated from the encrypted image by applying interference rule. In the decrypting process, I can get a interference intensity by interfering the reference image and the encrypted image in the interferometer. and transform inferference intensity information into phase information. I recover original image by inverse Fourier transforming the phase information. In this process, the intensity information generated by interference of two images is very sensitive to external vibrations. So, I would like to get a stable interference using the characteristic of SPPCM(self pumped phase conjugate mirror) in photorefractive materials, especially BaTiO₃.

• 대한수학회논문집
• /
• 제15권1호
• /
• pp.123-131
• /
• 2000

Let {X(t) : t $\geq$B 0} be a Symmetric $\alpha$ Stable and H-Self-similar process with stationary increments. We examine a.s. Holder unboundedness of S$\alpha$S H-sssi Chentsov processes and H-sssi Chentsov fields for order ${\gamma}$>H. Finally, we prove a.s. Holder continuity of S$\alpha$S H-sssi processes with ergodic seating transformations for the case of H>1/$\alpha$.

• 대한수학회논문집
• /
• 제21권4호
• /
• pp.787-794
• /
• 2006

Two main results are presented in relation to subordination, self-decomposability and semi-stability. One of the result is that strict semi-stability of subordinand process by selfdecomposable subordinator gives semi-selfdecomposability of the subordinated process. The second result is a sufficient condition for any subordinated process arising from a semi-stable subordinand and a semi-stable subordinator to be semi-selfdecomposable.

• 한국융합학회논문지
• /
• 제5권4호
• /
• pp.163-169
• /
• 2014

A stable neural network control scheme for unknown non-linear systems is developed in this paper. While the control variable is optimised to minimize the performance index, convergence of the index is guaranteed asymptotically stable by a Lyapnov control law. The optimization is achieved using a gradient descent searching algorithm and is consequently slow. A fast convergence algorithm using an adaptive learning rate is employed to speed up the convergence. Application of the stable control to a single input single output (SISO) non-linear system is simulated. The satisfactory control performance is obtained.

• 공업화학
• /
• 제31권5호
• /
• pp.575-580
• /
• 2020

본 연구에서는 열 안정성 염 제거장치가 추가된 아민 재생 공정을 모사하고, 폐수 량, 열 안정성 염 제거 량, MDEA(methyl diethanolamine) 손실량을 고려한 최적 운전조건 도출 전략을 제시하였다. 산성 가스를 흡수 및 탈거하는 아민 재생공정에서 열 안정성 염은 공정 장비 및 아민 용액의 흡수 효율을 저해한다. 열 안정성 염 제거 방법 중 하나인 이온교환수지법은 NaOH와 같은 강 염기성 용액을 사용하여 중화반응을 통해 염을 제거시키는 방법이다. 공정 모델링 과정에서 산성 가스의 탈거 과정은 Radfrac 모델을 사용했고, 반응의 평형상수는 Gibbs 자유에너지를 사용하여 계산하였다. 탈거된 아민 용액의 일부는 열 안정성 염 제거 장치로 들어가게 되고, 제거 장치는 중화반응을 이용한 Rstoic 모델을 사용하였다. 실제 운전데이터와 시뮬레이션 결과를 비교하여 검증하였고, 제거 장치로 들어가는 질량 유량을 조절하여 사례연구를 하고 최적 운전 조건을 제시하였다.

• 한국전기전자재료학회논문지
• /
• 제20권4호
• /
• pp.303-307
• /
• 2007

This paper investigated the effect of the pad buffing process on the material removal characteristics and pad stabilization during silicon chemical mechanical polishing. The pads surface were controlled by the buffing process using a buffer made by the sandpaper. The buffing process is based on abrasive machining by using a high speed sandpaper. The controlled pad by the buffing process show less deformation deviation and stable material removal rate during the CMP process. In addition, the controlled pad ensure better uniformity of removal rate than comparative pads. As a result of monitoring, the controlled pad by the buffing process demonstrated constant and stable friction force signals from initial polishing stage. Therefore, the tufting process could control the pad surface to be uniform and improve the performance of the polishing pad.

• The Journal of Korean Physical Therapy
• /
• 제23권2호
• /
• pp.7-15
• /
• 2011

Purpose: We investigated the relationship between the muscle activity and kinematic variables of the upper extremity during a push-up task on stable and unstable surfaces. Methods: We recruited 15 healthy subjects. Subjects completed the push-up task on stable and unstable surfaces. Surface electromyograms were recorded from the serratus anterior, upper trapezius, latissimus dorsi, infraspinatus to monitor changes in muscle activity. Markers for kinematic changes of elbow flexion, shoulder extension, shoulder retraction and scapular adduction were attached at C7, the T7 spinous process, both acromions, the scapula superior and inferior angle, the humerus lateral epicondyle, and the ulnar styloid process. Correlation coefficients between muscle activity and kinematic variables were analyzed by SPSS for Windows, version 15.0. Results: On the unstable surface, elbow flexion and shoulder extension increased with increasing muscle activity of serratus anterior, upper trapezius and infraspinatus. On the stable surface, shoulder retraction decreased with increasing muscle activity of serratus anterior and infraspinatus. Scapular adduction decreased with all types of increasing muscle activity, regardless of the support surface. Conclusion: Correlations between muscle activity and kinematic variables were observed on stable and unstable surfaces during a push-up task, while correlations between right and left variables were not clear. These finding suggest that it may be used to develop a rehabilitation program which could be effective in improving shoulder function in patients with shoulder problems.