• Current Research on Agriculture and Life Sciences
• /
• v.5
• /
• pp.52-58
• /
• 1987

The yeast S. cerevisiae DBY747 was transformed with E. C - S. C shuttle vector YIp5, YEp13 and YRp7 by the method of spheroplast. The transformation frequency of YEp13 and YRp7 in S. cerevisiae DBY747 was $1.2{\times}10^3$ and $1.0{\times}10^2$ per $10{\mu}g$ of DNA, respectively. The transformants with YIp5 plasmid incapable of autonomous replication in S. cerevisiae were not detected in the condition of this experiment, but YIpS plasmid expressed the gene carried on it when cotransformed with a helper plasmid such as YEp13 or YRp7 : autonomously replicating plasmid. When plasmids were used in covalently closed circular form, cotransformation frequency of Ylp5-YEpl3 and Ylp5-YRp7 was 210 and 95 per $10{\mu}g$ of DNA, respectively. In cotransformation of linear plasmids, transformation frequency of the same cohesive ends was similar to that of noncomplementary cohesive ends. Transformants by the cotransformation with circular plasmids have been shown much higher frequency than with linear plasmids in S. cerevisiae DBY 747. The mitotic segregation stability test suggested that the cotransformant of YIpS-YEp13 was more stable than that of YIpS-YRp7.

• The Journal of Art Theory & Practice
• /
• no.3
• /
• pp.67-84
• /
• 2005

Since the evaluation of its intellectual activities and abilities is done by curator's capabilities, planning exhibition is very important as the final result achieved by their own knowledge, information, and research. ARPA(Advanced Research Project on Arts) is suggested as the system which enables curators responding simultaneously to the society in the times, based on its special characteristics. If this system settles well, which means that the curators at NMCA(National Museum of Contemporary Art, Korea) play their roles as the professionals in each of their fields, the goal of consolidating the status of museum as the representative national museum, and building up competent department of curators, will be achieved at the same time. To clarify above, the curators set up the various assignments of research about the types of arts such as painting, Korean painting, sculpture, installation, new-media, design, craft, photogarphy, architecture, etc. And they establish the art objects classified by the regions, such as the Northern American, Southern American, European, Asian, and other Third World countries. They elaborate art objects more on the history, the work, the artist, and the issue of contemporary art. Furthermore, when the curators devote deeper study to those research subjects, they can have the opportunities to design an exhibition upon the research. Today, the museum of art is 'The Place for Communication and Encounter', it is regarded important to share the aesthetical, creative values with current artists, and to understand mutually with the spectators. It is needed to improve the curator's work, in order to meet the demands of the times and even to advance. Because the form of 'exhibition' is the tool that reveals the identity NMCA aiming at, the motivation, the development, and the realization should be leaded by the curators, who are the mainstream of the museum. ARPA is a system for identifying the exhibition like mentioned above. The main purpose of this system is to produce synergy effect, having the researching, collecting work in liaison with planning exhibition. ARPA will be able to improve the quality of exhibition through the way of developing the exhibition, passing through the stable process in the long run. So far, I have referred to a new paradigm of the exhibition design at NMCA via ARPA. Yet, there still remain missions in reality, such as analyzing the previous exhibition and reshuffling personnel and system, which should be done. When these matters settled, these plans would be suggested practically. At this point, it is the most significant that NMCA is attempting to let others aware of the importance of exhibition planning based on research. when the ARPA and exhibition planning is conjoined together successfully, the competent exhibition will be achieved, which can offer a meaningful exhibition to the art world, strengthen infra structure thru exchanging with public museum in the region, and eventually, establish a network with museum in foreign countries.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.772-780
• /
• 2008

K-means is one of the simplest unsupervised learning algorithms that solve the clustering problem. However K-means suffers the basic shortcoming: the number of clusters k has to be known in advance. In this paper, we propose extensions of X-means, which can estimate the number of clusters using Bayesian information criterion(BIC). We introduce two different versions of algorithm: modified X-means(MX-means) and generalized X-means(GX-means), which employ one full covariance matrix for one cluster and so can estimate the number of clusters efficiently without severe over-fitting which X-means suffers due to its spherical cluster assumption. The algorithms start with one cluster and try to split a cluster iteratively to maximize the BIC score. The former uses K-means algorithm to find a set of optimal clusters with current k, which makes it simple and fast. However it generates wrongly estimated centers when the clusters are overlapped. The latter uses EM algorithm to estimate the parameters and generates more stable clusters even when the clusters are overlapped. Experiments with synthetic data show that the purposed methods can provide a robust estimate of the number of clusters and cluster parameters compared to other existing top-down algorithms.

• Cross-Cultural Studies
• /
• v.35
• /
• pp.315-338
• /
• 2014

The purpose of this study is to propose actual operation condition of Japanese lecture based on social welfare organizations located in Seoul to investigate the current status and problems of Japanese language education in terms of lifelong education. According to the result of this study, the remarkable point was that a majority of Japanese lecture courses are highly focused on the elderly and 86% of the welfare organizations are providing free education. Regarding the effect of specialized business for the aged run by social welfare community center, it says, as Korea changing to aging society at the beginning of 21st century, it has put focus on strengthening personal competences of seniors through opportunities for participation in lifelong education, recreational activity programs and culture classes. It means foreign language classes are operating as one of the lifelong education programs for reinforcement of individual capability. Considering this tendency, it is expected that the lifelong education participation rate of the elder in Seoul will be raised. So, systematic improvements will be needed for this. First, it is required to recognize the existence of Educational and Cultural Industry and work hard to make it public so it could be invigorated and utilized by people usefully at the same time. Second, Japanese language training that mostly 55-year-old or more than 60-year-old people receive at the welfare center needs to be systematized for preparations on proper studying environment which provides the older with appropriate education method and content as well. Third, stable and systematic operation should be available through the link with experts in the field of Japanese language education and elderly education. Fourth, education program development is needed, which is able to satisfy one's desires for learning. Hence, targeting Japanese learners at each welfare center, we need to know the estimation of satisfaction degree and consciousness on learning Japanese. Finally, it has not been studied sufficiently regarding the instructors on teaching Japanese language in this paper, but it has been reported that most of social welfare centers, where Japanese language lectures are provided, are run by volunteers who can teach Japanese. Thus, the study on actual condition for Japanese language instructors will be conducted as well later on.

• Journal of Life Science
• /
• v.31 no.10
• /
• pp.960-968
• /
• 2021

Since microalgae research started on late 18 century, they have been recognized as one of the most important bioresources used in bioindustry. Owing to the large efforts paid to industrial application of this microorganisms, their importance on food/feed and bioactive compounds has been further extending into the environmental research areas including alternative energy resources, mitigation of the carbon emission, and waste-water treatment. However, despite the importance on their industrial application, the fundamental research field related to the long-term preservation of microalgae culture has not received much attention. However, a less labor intensive and cost-efficient preservation technology enabling biologically active and stable microalgae-culture provides a key success factor in the biotechnological application. Therefore, this study investigated various cutting-edge microalgae cryopreservation technologies currently developed so far, mainly targeting Chlorophyta, which occupies the largest taxon in the classification system of microalgae. In addition, for the development of successful cryopreservation technique, the key factors such as temperature control effect and preservative effect during cryopreservation of microalgae culture were investigated. In addition, the problems with current preservation technology that is being used in Korean domestic biological resource banks and the international microalgal resource banks are described. According to our investigation, currently no standard method for long-term preservation of microalgae is available due to their various morphological and physiological characteristics. To overcome such issues, much more efforts on fundamental research area on the identification of specific biomarker used for microalgae taxonomical classification and further systemic approaches based on strain-specific cryopreservation methods needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.379-386
• /
• 2021

This study was undertaken to develop a cascade-type continuous culture system (CCCS) that combines both ICT and biotechnology (BT), for the mass production of microalgae. This system is capable of maintaining the essential culture conditions of pH, temperature, carbon dioxide, and illuminance control, which are key parameters for the growth of microalgae, and is economical for producing microalgae regardless of the season or location. It has the added advantage of providing stable and high productivity. In the current study, this system was applied to culture microalgae for 71 days, with subsequent analysis of the experimental data. The initial O.D. of the culture measured from incubator 1 was 0.006. On the 71st day of culture, the O.D.s obtained were 0.399 (incubator 1), 0.961 (incubator 2), 0.795 (incubator 3), and 0.438 (incubator 4), thereby confirming the establishment of continuous culture. Thus, we present a smart-farm based on ISMC (in-situ monitoring and control) for a mass culture method. We believe that this developed technology is suitable for commercialization, and has the potential to be applied to hydroponics-based cultivation of microalgae and cultivation of high-value-added medicinal plants as well as other plants used in functional foods, cosmetics, and medical materials.

• Korea Science and Art Forum
• /
• v.37 no.5
• /
• pp.239-248
• /
• 2019

This study started from the need to improve one of shortcomings of synthetic PVAc adhesives - potential physical harm and environmental hazards to the workers or their users. As a matter of fact, PVAc adhesives are currently mainly used because of their convenience and economy for the production of woodcrafts. The purpose of this study was to develop natural adhesives through research on natural adhesives in step with the current increase of societal attention to environmental friendliness and rapid surge in their demand in the face of such problems. So, the study attempted research on the bases to develop natural adhesives for woodcraft, using cellulose extracts from wood - natural adhesive material. The findings of the study were as follows. Firstly, natural adhesives showed the improved effect in the field of adhesive strength, a basic physical property by 0.2 - 4 times compared with the existing materials and the study confirmed they had the similar or stable pH value. Besides, they had good reversibility, demonstrating their basic physical property as a natural adhesive for woodcraft. While, their durability to ultraviolet ray degradation also showed an excellent result value being better by 1.5 - 8.5 times than the existing materials. The study expects natural adhesives with improved and better performances compared with the existing materials could be developed, if further research on adhesive strength, antibiosis, conservative property were to continue by developing refinery technology for cellulose extracts from wood and rendering the functionality to them.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.1-12
• /
• 2018

The code and standards related to fuel cells were analyzed to derive the SOFC(Solid Oxide Fuel Cell) stack safety performance evaluation items and evaluation methode. Safety performance evluation of the SOFC stack was tested by quoting derived test items. The stack used in the test is an anode-supported type 2 Cell stack (Active surface area : 220cm) manufactured by MICO Inc, and SOFC stack safety performance evaluation system used for the test is self-manufactured. We conducted a leakage test, current voltage characteristic test, rated output test, and power response characteristics test. In the safety performance evaluation test, the stack showed no gas leakage, the maximum output and rated output was recorded to 65.6 W(1.41 V, 46.5 A, $422mA/cm^2$), 62.3 W(1.57 V, 40 A, $363mA/cm^2$). In the power response characteristics test verified that the output is kept stable within two seconds. At the maximum load (40 A) and the minimum load (8 A), the output was recorded 62 W and 16W in $750^{\circ}C$. This study will contribute to the universalization and to provide much safe environment of operating the solid oxide fuel cell system.

• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.696-702
• /
• 2018

Recently, the current thermal battery technology needs new materials for electrodes in the power and energy density to meet various space and defense requirements. In this paper, to replace the pellet type Li(Si) anode having limitations of the formability and capacity, electrochemical properties of the lithium anode with high density for thermal batteries were investigated. The lithium anode (Li 17, 15, 13 wt%) was fabricated by mixing the molten lithium and iron powder used as a binder to hold the molten lithium at $500^{\circ}C$. The single cell with 13 wt% lithium showed a stable performance. The 2.06 V (OCV) of the lithium anode was significantly improved compared to 1.93 V (OCV) of the Li(Si) anode. Specific capacities during the first phase of the lithium anode and Li(Si) were 1,632 and $1,181As{\cdot}g^{-1}$, respectively. As a result of the thermal battery performance test at both room and high temperatures, the voltage and operating time of lithium anode thermal batteries were superior to those of using Li(Si) anode thermal batteries. The power and energy densities of Li anode thermal batteries were also remarkably improved.

• 한국노년학
• /
• v.37 no.1
• /
• pp.15-32
• /
• 2017

The current study aims to identify the heterogeneous changes of functional disabilities in old age rather than to identify an average longitudinal pattern and to explore the effect of health status and social status as risk factors in functional disability trajectories. The sample consisted of a representative sample of community dwellers aged 65 and older from the Korean Longitudinal Study of Ageing (2006 - 2012) was the focus of the study. Latent Class Growth Analysis was used to identify the functional disability trajectory groups. Variables regarding health status and social status changes by class were identified using multinomial logistic regression. The results showed various change patterns in functional disability, which include independent (78%), stable high (4.4%), steeply increasing (7.1%), slightly increasing (5.5%), and moderate to low (4.7%). Aggravation in depressive symptoms and cognitive functions as well as decline in social participations and social engagements were significant predictors of membership in increasing group of functional disability. The findings provide important initial empirical information to target clinical practice and have implications in the importance of conducting research on groups with different characteristics.