• 한국가스학회지
• /
• 제14권2호
• /
• pp.34-39
• /
• 2010

삼지화염의 화염안정화 메커니즘 중 중요한 한 가지는 화염전파속도이다. 화염전파속도의 정량적인 규명을 위해 Bilger는 층류 유동이론에 근거하여 혼합분율 기울기에 비선형적으로 연관된 삼지화염 전파속도를 실험으로 제시하였다. 그러나 지금까지의 연구에서는 화염의 곡률에 따른 삼지화염 전파속도에 관하여 논의된 바가 없기에, 본 논문에서 화염의 곡률에 따른 화염전파속도의 연관성을 제시하고자 하였다. 본 논문의 결과로 층류부상화염의 부상높이가 연료의 출구속도와 노즐의 직경에 따라서 결정됨을 알 수 있었다. 그리고 정지된 부상화염의 유동속도에 비례하는 연료의 출구속도에 곡률의 크기가 비례함을 보였고, 또 층류부상화염의 부상높이가 높아질수록 곡률반경의 크기가 커짐을 알 수 있었다. 따라서 곡률효과의 중요성이 인식되어야 하며 화염안정화 메커니즘을 표현하기 위해 제안된 Bilger의 제안식이 곡률효과를 고려하여 수정되어야한다.

• 한국분무공학회지
• /
• 제8권4호
• /
• pp.24-30
• /
• 2003

This paper presents the characteristics of lifted height and flame length from non-premixed jet flames in highly preheated air to investigate the detail combustion mechanism in the gas turbine or HCCI engine, etc. Special attention was paid to the effect of preheated air temperature, oxygen concentration and fuel injection flow rate on flame length and lifted hight. By using highly preheated air, stable flames were formed even in low oxygen concentration condition. The lifted height increased with decreasing preheated air temperature, where the flame length showed opposed phenomena. The flamelet model, which is thought to have very thin flamelet, is difficult to applicable to the present flame conditions which is formed In low oxygen concentration in highly preheated air.

• 한국운동역학회지
• /
• 제32권3호
• /
• pp.103-110
• /
• 2022

Objective: The aim of this study was to investigate effect of core stabilization exercises on the erector spinae contractile properties and trunk isokinetic muscle function of middle age with low physical activity and sedentary lifestyle. Method: Twenty (female: n=10, male: n=10) middle-age subjects (age: 37.25 ± 6.08 years, height: 168.01 ± 6.84 cm, weight: 71.37 ± 11.75 kg) participated in this study. Tensiomyography was measured on the erector spinae, and the isokinetic trunk muscle function test was measured at an angular velocity of 60 °/s and 90 °/s. All subjects performed the core stabilization exercises for 60 min per day, 3 times a week, for 7 weeks. A paired t-test was performed with a significance level of 0.05. Results: Tensiomyography of the erector spinae revealed a significant post-exercise increase in the maximum radial displacement (p < .05) and velocity of contraction (p < .05), however, there wasn't a significant post-exercise change in the contraction time. Additionally, the isokinetic muscle function test of the trunk revealed a significant post-exercise increase in trunk extensor relative strength (p < .05) and strength ratio (p < .05). Conclusion: Our results indicated that core stabilization exercises reduced erector spinae muscle stiffness, increased the velocity of erector spinae contraction. Additionally, data showed the improvement in the trunk extensor strength help induce a more balanced development in trunk muscle.

• Journal of Korean Neurosurgical Society
• /
• 제42권2호
• /
• pp.112-117
• /
• 2007

Objective : Kyphoplasty and vertebroplasty are two minimally invasive procedures for osteoporotic vertebral compression fractures. The purpose of this retrospective study was to compare the radiological findings and clinical outcomes between two procedures. Methods : Osteoporotic vertebral fractures were treated in 76 vertebrae, using kyphoplasty (n=35 vertebrae) and using vertebroplasty (n=41 vertebrae). Fractured vertebral bodies were diagnosed by correlating the clinical symptoms with radiologic study. The responses of pain symptoms were measured by a self-reported Visual Analog Scale (VAS) score. Plain X-rays were checked preoperatively and postoperatively at admission and 6 months. The vertebral body height and kyphotic angle were measured to assess the reduction of the sagittal alignment. Results : The mean pain scores were decreased significantly for both procedures postoperatively, but there were no significant differences between two groups. Kyphoplasty led to a significant reduction of the vertebral body height and improvement of kyphotic angle. There were no neurological deficits after kyphoplasty, but one patient experienced paraparesis after vertebroplasty. During the 6 months follow-up both procedures provided stabilization of the sagittal alignment. Conclusion : Kyphoplasty and vertebroplasty are considered effective minimally invasive techniques for the stabilization of osteoporotic vertebral body fractures, leading to a statistically significant reduction in pain. Kyphoplasty significantly restore sagittal alignment. Also, complications and the incidence of bone cement leakage are significantly lesser than vertebroplasty. Therefore, kyphoplasty seems to be reasonable procedure for osteoporotic vertebral body compression fractures when medical treatment fail.

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.602-609
• /
• 2001

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zeroenergy mode of the element. The analysis includes an inflation analysis and a lateral analysis of an air spring for the deformed shape and the spring load with respect to the vertical and l ateral deflection. Numerical results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force with respect to the inflation pressure and the lateral deflection.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.274-279
• /
• 2000

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zero-energy modes of the element. An inflation analysis and a lateral deformation analysis of an air spring are carried out. Numerical analysis results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.156-158
• /
• 2004

In the ATs(Auto-Transformers)-fed AC electric railroad system, the trolley wire with high power is supported with a messenger by the dropper. As the dropper maintains the height of the trolley wire and plays a role in distributing the supply power, it should be stabilized in that an electric and mechanical character accord ins the change of the open air circumstance and constructed easily. Consequently, this paper propose C5111 Sn(3.5$\sim$4.5%) and hexagonal round bolt for the way of the efficient stabilization as a result of the test that the correlation of the Sn content and the change of temperature affect a character of product.

• 한국조경학회지
• /
• 제23권2호
• /
• pp.113-123
• /
• 1995

This study was conducted to find out appropriate rates of seed mixture of both native and foreign plants in order for stabilization of early afforestation and proper vegetation on road slope. The results are summarized as follows: 1. Characteristics of germination : After seeding, 2 weeks for both Lespedeza bicolor and Lespedeza cuneata, and 4 weeks for both Arundinella hirta and Zoysia japonica were needed for vigorous germination, and 1-4 wee17s for 3 cool-season grasses were spent for gradual germination. 2. Plant height : There was no difference between Lespedeza cuneata and Lespedeza bicolor in plant height by 7 treatments. As mixture rates of cool-season grasses were lowered, plant height of Arundinella hirta became longer. Descending order of co81-season grasses for plant height was Tall fescue, Perennial ryegrass and Creeping redfescue. 3. Number of tillers : The number of tillers tended to increase in the experimental plots where competition was low. 4 Ground cover rate : Ground cover rate was the highest in Mixture IV (96.7%) and was fluctuated from 13.3% on Sept. 13 to 45% on Nev. 3 in Mixture III. Descending order of gronud cover rates in 7 treaments was Mixture IV, Mixture III. Mixture II, Mixture Ⅶ, Mixture V, Mixture Ⅵ, Mixture I, and Mixtur III when measured on Oct. 13 5. Visual assessment: High preferences were observed on Mixture IV and Ⅶ In sun the best seed mixtures were Mixture IV and Ⅶ. It meant that (1) either mixture of 70% the native plants with 30% cool-season graaes or (2) mixture of 80% the native plants with 20% cool-season glasses was best for this study.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.75-76
• /
• 2015

Lifted flame stabilization mechanism can be explained with constant Schmidt number from the equation of $H^{\ast}_L/d^2_o=const{\times}v_e^{(2Sc-1)/(Sc-1)}$. In this research, a method of local Schmidt number was applied in order to measure edge flame propagation velocities, and edge flame propagation velocity was calculated from the trend between lift-off height and nozzle flow rate.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제23회 KOSCO SYMPOSIUM 논문집
• /
• pp.104-110
• /
• 2001

Characteristics of lifted flame for highly diluted propane with nitrogen in high temperature coflowing air have been experimentally investigated, and the stabilization mechanism of lifted flame in high temperature air coflow have been proposed. As the coflow temperature increases, the liftoff height of flame decreased due to the increase of stoichiometry laminar burning velocity. At same coflow temperature, the difference of liftoff height between the fuel mole fractions has been disappeared by scaling the liftoff velocity with stoichiometry laminar burning velocity. It has been found that lifted flame can be stabilized for even smaller fuel velocity than stoichiometry laminar burning velocity. This can be attributed to buoyancy effect and the liftoff velocity characteristics for coflow temperature support it.