• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.10
• /
• pp.951-959
• /
• 2011

In this study, an OTM(on-the-move) antenna which is mounted on ground vehicles and is used for mobile communication between vehicle and satellite while moving was addressed. Since LOS(line-of-sight) of antenna should direct satellite consistently while vehicle moving to guarantee high satellite communication quality, active antenna LOS stabilization is a core technology for OTM antenna. Stabilization of a satellite tracking antenna which consists of 2-DOF gimbals, an elevation gimbal over an azimuth gimbal, was considered in this study. In consideration of driving mechanism which consists of gear train and flexible driving shafts, a two-mass-system dynamic model coupled with vehicle motion was presented. An internal PI-control loop + outer PI-control loop structure has been suggested in order to damp the torsional vibration and stabilize control system. The classical pole-placement method was applied to design control gains. In addition, a vehicle motion compensation control beside of the feedback control loop has been suggested to improve LOS stabilization performances. The feasibility of the proposed control design was verified along with some experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.643-647
• /
• 1990

Gunner primary sight(GPS) stabilization system lays line of sight(LOS) to find out a target and transmits informations to the fire control system (FCS). In a moving vehicle, accuracy of LOS and FCS depends on the design of GPS and servomechanism system. The heavy vibration of vehicle on the severe off-road environment degenerates the stabilization capability of GPS. In this study, to stabilize of elevation for GPS using the variable structure control, we derived the dynamic equation of GPS system and designed the variable structure controller. Computer simulation results fulfilled the static and dynamic stability of GPS using the variable structure control.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.323-330
• /
• 2016

This paper describes real-time unbalance moment compensation method for line of sight(LOS) stabilization control systems. The factors of system inertia, frictions and unbalance moment affect the control accuracy of drive systems that are equipped to on the move(OTM) platforms requiring LOS stabilization function. In case of the unbalance moment among those factors is continuously changed as variation of relative angle between gravity vector and drive torque vector. Then, consideration of the effect in real-time is very complicate. Therefore, its effect should be designed to be minimized, however, designing it almost zero is impossible in real condition. In other words, it is hard to achieve target performance overcoming stability issue of highly unbalanced systems. To solve these problems, this paper proposes calculation method of unbalance moment by using measured sensor data for LOS stabilization control and its use for control compensation. Also, kinematical converting process and control structure for compensation are explained. The effectiveness of the proposed method as variation of unbalance moment is verified under simulation circumstance modeled by assuming LOS control system with 2-axis gimbal structure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.11
• /
• pp.2073-2082
• /
• 2010

The 4-th generation of mobile communication aims to realize global, fast and mobile communication service. The satellite communication charges a key role in this field. In this study, an OTM(On-The-Move) antenna which is mounted on ground vehicles and is used for mobile communication between vehicle and satellite was addressed. Since vehicles move during communication, active antenna line-of-sight stabilization is a core technology to guarantee high satellite communication quality. Stabilization of a satellite tracking antenna which consists of 2-DOF gimbals, an elevation gimbal over an azimuth gimbal, was considered in this study. Various disturbance torques such as static and dynamic mass imbalance torques, variation of moment of inertia according to elevation angle, friction torque related to vehicle motion, equivalent disturbance torque due to antenna roll motion, etc. were analyzed. As a robust stabilization control, rate feedback with sliding mode control and position feedback with proportional+integral control was suggested. To compensate antenna roll motion, a supplementary roll rate feed forward control was included beside of the feedback control loop. The feasibility of the analysis and the proposed control design were verified along with some simulation results.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.7 no.1
• /
• pp.43-48
• /
• 2009

Purpose : The purpose of this study was to study the effect of rectus abdominal muscle contraction by proprioceptive neuromuscular facilitation trunk stabilization training using extremity simultaneous pattern (PNF trunk stabilization training) and traditional trunk stabilization training methods. Methods : A group of 24 adults male and female, healthy, with no previous medical history nor disability in neuromuscular system and musculoskeletal system was chosen as subjects, and was divided into a control group, a PNF trunk stabilization training group and a traditional trunk stabilization training group. Experiments were performed on the last two groups, 3 times a week for 6 weeks, totaling 18 times. Using a dynamometer, muscle strength and endurance time on trunk flexion were measured before and after each experiment, and surface electromyography in left and right rectus abdominis were measured. Results : following results were obtained; 1. As for the change in the maximal voluntary isometric contraction (MVIC), all subjects in the trunk stabilization training group showed significant difference from those in the control group. 2. As for surface electromyography measurement and the changes in root mean square at the time of trunk flexion, in the left rectus abdominis, PNF trunk stabilization training group showed significant difference from the control group, while in the right rectus abdominis, traditional trunk stabilization training group showed significant difference. Conclusion : To sum up the results, both trunk stabilization training groups showed improvement in the MVIC of abdominal muscle, motor unit action potential activity, but the difference between two trunk stabilization training groups was not significant. Therefore, while trunk stabilization training significantly improved abdominal muscle contraction, but the difference attributable to training methods was found to be insignificant.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.1
• /
• pp.58-64
• /
• 2007

In this paper, the stabilization problem of the image stabilization system(ISS) that captures the image of an object on the ground by remote sensing is considered. The ISS should be stable under outer disturbance such as helicopter vibration for tracking line of sight. Although PID controllers are optimized for the system, disturbances cause the instability of the system. To minimize the effect of the disturbance, the time-delayed control method is used to compensate for uncertainties. Simulation studies are performed and experiments are conducted to confirm the simulation results. Performances of PID control and time-delayed control methods are compared.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.148-153
• /
• 1988

In this study, the stabilization of moving sight using a gyro is investigated. At first, Linear Compensator was design by linearizing gyro, torque motor and several parameters from a given required frequency response curve. By using this, System Control Performance was analyzed by back EMF, torque saturation and Coulomb friction effects. Also stabilization Performance by disturbances and Paramter variations were simulated.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.454-457
• /
• 1997

As in most industrial processes, the dynamic characteristics of an electric power system are subject to changes. Amongst those effects which cause the system to be uncertain, faults on transmission lines are considered. For the stabilization of the power system, we present an indirect adaptive control method, which is capable of tracking a sudden change in the effective reactance of a transmission line. As the plant dynamics are nonlinear, an input-output feedback linearization method equipped with nonlinear damping terms is combined with an identification algorithm which estimates the effect of a fault. The stability of the resulting adaptive nonlinear system is investigated.

• Journal of applied mathematics & informatics
• /
• v.18 no.1_2
• /
• pp.95-112
• /
• 2005

This work concerns the stabilization of uninfected steady state of an ordinary differential equation system modeling the interaction of the HIV virus and the immune system of the human body. The control variable is the drug dose, which, in turn, affects the rate of infection of $CD4^{+}$ T cells by HIV virus. The feedback controller is constructed by a variant of the receding horizon control (RHC) method. Simulation results are discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.507-507
• /
• 2000

In this paper, a kind of limit cycle of an inverted pendulum system is discussed. We propose a stabilization control law for such a limit cycle of an inverted pendulum system that the pendulum rotates periodically. Besides, the stabilization control law is extended so as to ensure not only stability of the limit cycle but also an L$_2$-gain disturbance attenuation in the presence of modeling error and viscosity friction.