• International Journal of Control, Automation, and Systems
• /
• v.3 no.spc2
• /
• pp.308-314
• /
• 2005

Transient stabilization with voltage regulation is investigated for a synchronous generator when the mechanical power is perturbed to any unknown value within its physical bounds so that the operating point of the system shifts to an unknown point. An adaptive excitation controller is designed based on the backstepping method with tuning functions. It will be shown that the adaptive control law proposed can achieve the convergence of the system states to the new equilibrium point in correspondence with the real value of the unknown mechanical power and the regulation of the terminal voltage to the required value. Simulation results are given to demonstrate the effectiveness of the proposed controller for the transient stabilization and voltage regulation.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2408-2410
• /
• 2001

This paper presents the control of an underactuated two-link robot called the Pendubot. Combining linearized state feedback control with Takagi-Sugeno(T-S) fuzzy controller wide-range stabilization of Pendulum is achieved. The local stabilization controler is designed by linearinzing the dynamic equations about the several desired set point and using LQR(Linear Quadratic Regulator) techniques. Takagi-Sugeno methodology is used to control the nonlinear models near different operation points. Fuzzy controller is obtained by the fuzzy blending of the local controllers. The paper includes a description of the algorithm as well as real time experimental results for the Pendubot.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.159-162
• /
• 1997

This paper describes robust stabilization of nonlinear single-input uncertain systems without matching conditions. We consider nonlinear systems with a vector of unknown constant parameters perturbed about a known value. The approach utilizes the generalized controller canonical form to lump the unmatched uncertainties recursively into the matched ones. This can be achieved via nonlinear coordinate transformations which depend not only on the states of the nonlinear system but also on the control input. Then the dynamic robust control law is derived and the stability result is also presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10b
• /
• pp.395-400
• /
• 1993

This paper presents an application of back propagation neural network to the tracking control of line of sight stabilization system. We design a neuro-control system having two neural networks one for learning system dynamics and the other for control. We use a learning method which adjusts learning rate and momentem as a function of plant output error and error change.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.539-544
• /
• 1998

This paper presents the stabilization of a shipboard satellite antenna system. Hardware systems composing the pedestal, pedestal control unit and antenna control unit are designed and stabilization control law is obtained. A model on each control axis is derived and its parameters are estimated using a genetic algorithm, and the optimal state controller is designed based on the estimated model. An experimental result demonstrates the effectiveness of the proposed system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.3
• /
• pp.330-336
• /
• 2009

This paper studies on the new control algorithm for the mass-flow stabilization in strip head part of a hot strip mill. A new strip tension model in the strip head part is derived using the current deviation of two neighboring stands. The current deviation means a difference between a measured current and a lock-on current, where the lock-on current is set up when a strip tension or a looper angle reaches each target value or time is about 0.4sec, respectively. On the basis of the tension calculation model, a mill velocity of a backward stand is controlled to stabilize a strip mass-flow by PI control algorithm. Therefore, the mass-flow control for strip head part is executed from a metal-in time into a foreward stand till the looper works normally. It is known by the results of a computer simulation and an experiment that the proposed control algorithm is very effective in stabilizing the mass flow of the strip head part.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.1
• /
• pp.15-21
• /
• 2004

This paper deals with asymptotic stabilization problems for linear systems with time-varying input disturbances. In order to eliminate the influence of a disturbance on the system, a disturbance observer is designed and the time-varying disturbance can be rejected using its estimated value. Since the disturbance observer is kind of low-pass filter, it has inevitably estimation errors. To eliminate the inflences on the performance due to these errors, the additional control is designed based on these estimation errors using a well-known min-max control method. It is shown that the asymptotic stability of the closed-loop system is guaranteed. In general, the min-max control method requires the switching of control inputs and the switching magnitude of the control input is determined by the disturbance estimation error bounds. As the error bounds can be made arbitrarily small by choosing the high gain for the disturbance observer, the control method suggested in this paper can reduce the chattering phenomena as small as possible. Therefore, it has superior performance to the existing ones.

• Journal of Aerospace System Engineering
• /
• v.7 no.3
• /
• pp.26-32
• /
• 2013

Passive attitude stabilization method has been widely usde for attitude determination and control of cube satellite due to its advantage of system simplicity. The permanent magnet installed on the cube satellite passively controls the attitude of the satellite such that the satellite is aligned with the earth magnetic field. In this paper, on-orbit thermal behavior of the cube satellite with the permanent magnet attitude stabilization method has been investigated through on-orbit thermal analysis. THe orbit profile obtained from the aforementioned attitude control method has been reflected in the analysis. The analysis results indicate that the thermal design proposed in this study is effective for satisfying the temperature requirements of the commericial mission equipments.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.102-105
• /
• 2000

A simple digital control system has been developed for the frequency stabilization of an internal mirror He-Ne laser. The system is based on one chip microprocessor with embedded Basic interpreter. To stabilize the laser output frequency, the signal such as power difference or beat frequency between two modes is supplied and processed by a microprocessor, and control signal is fed to the heating coil would round the laser tube for adjusting the spacing of the laser cavity mirror. Newly developed frequency stabilization system is totally digitized. The system and the frequency stability performance are briefly described.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.441-441
• /
• 2000

In wheeled mobile robot (WMR) research, point stabilization is one of the basic research issue. Point stabilization is to set mobile robot in desired position regardless of its orientation. In this paper, we propose a point stabilization scheme for car-like type WMR. We will define a new error states named as tangential error and nomal error. Then a heuristic control scheme will be suggested. The performance of these approach is verified via POSTUR-II.