• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.246-259
• /
• 2021

IMO stability regulations include various stability parameters such as GM values. To assess the stability of the ships, we should check all stability parameters of the IMO requirements. However, since this process is complex, a more convenient way to evaluate stability performance is required. In this research, the index for marine ship intact stability assessment (IMSISA) model was developed to solve these problems. The IMSISA model consists of a stability index calculation module and a stability assessment module. In the stability index calculation module, ten stability parameters, including GM, were used to develop the stability index, which has the advantage of being able to quantify the ship stability. The stability assessment module uses the stability index value to determine the stability status of the ship and provides the captain with stability management guidelines. To verify the proposed model, the basic stability calculations were performed for two model ships in 32 loading situations. The proposed model was found to provide better performance in the stability assessment than the previous study. By applying the IMSISA model to the ships, the captain can assess the ship stability more quantitatively and efficiently.

• 대한조선학회논문집
• /
• 제59권2호
• /
• pp.89-95
• /
• 2022

The stability of the existing ships has been evaluated through numerical calculations in the steady-state, but recently the IMO proposed a new stability assessment criteria that the stability is evaluated in the state in which environmental loads from such as waves and wind act like the loads under actual ship operating conditions. In this study, IMO 2nd generation stability assessment method and procedure were summarized for the dead ship condition, and Direct Stability Assessment (DSA) was performed on 13K chemical tanker through basin model test. The model test is performed in the ocean engineering basin to implement wave and wind loads, and environmental conditions for waves were set height and period of the incident wave, considering the regular wave and wind generation range reproducible in the ocean engineering basin. In addition, to consider the effect of wind speed, the Beaufort Scale for wind speed was applied in the model test.

• 설비공학논문집
• /
• 제29권6호
• /
• pp.306-315
• /
• 2017

This study introduces a software for real-time assessment of combustion stability for utility gas turbines. The software was written with LabView, and implemented the time-domain kurtosis as a parameter to proactively access the instantaneous combustion stability during operation of the industrial gas turbine. The simple time-domain assessment algorithm incorporated in the software is advantageous over conventional frequency-domain signal processing of dynamic pressure signal since it reduces the computational cost, thereby making the algorithm more appropriate for real-time monitoring of combustion stability. Benchmark data obtained from a model gas turbine combustor were used for the reproducibility test of the software. The assessment obtained from the software agreed well with previously published results, indicating that incorporation of the software could enhance the performance of systems monitoring the combustion stability for gas turbines during power generation.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.167-175
• /
• 2006

Directional stability is important performance in vehicle and tire design. The current methods to analyze this is generally based on linear concept. Using the existing concept, it cannot realistically explain the subjective assessment at all because it is hard to practically represent the nonlinear behaviour of a complex vehicle system in reality. In this paper, new method to analyze directional stability is introduced. At first, directional stability of vehicle is categorized into yaw, rear axle, and roll stability. In order to objectify these items, driver perceptual parameters based on subjective assessment are used. Using the perceptual parameters, it can successfully explain the transient maneuver of vehicle and extract objective parameters for directional stability. Finally, these objective parameters are successfully validated through two handling tests, lane change and severe lane change. The correlation results show that there exists a good correlation between subjective assessment and the proposed objective parameters.

• 환경정책연구
• /
• 제1권1호
• /
• pp.91-110
• /
• 2002

Ecosystem health assessment is an emerging concept regarded as a useful diagnostic tool for evaluating ecosystems. The stability of ecosystem is the main theme in the assessment. Generally, two components - resilience and resistance - are involved in the mechanism of ecosystem stability. In this study, relative degrees of the resistance and the resilience were quantified for most aquatic Insects Inhabiting running waters in Korea. A total of 34 groups were newly categorized based on previous studies, and a conceptual model has been produced. The model was applied for the aquatic insect communities inhabiting different streams and demonstrated that each stream ecosystem possessed different degrees of stability. This study also indicated that it was possible to compare stabilities of different ecosystems using relative degrees of resilience and resistance. Using the conceptual model, suitable conservation and management strategies could be recommended in ecological assessments. The model can be used as a stepping-stone for developing more comprehensive methodology that objectively diagnoses and evaluates the ecosystem stability.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1123-1128
• /
• 2008

The necessity of online dynamic security assessment is getting apparent under Electricity Market environments, as operation of power system is exposed to more various operating conditions. For on-line dynamic security assessment, fast transient stability analysis tool is required for contingency selection. The TEF(Transient Energy Function) method is a good candidate for this purpose. The clustering of critical generators is crucial for the precise and fast calculation of energy margin. In this paper, we propose a new method for fast decision of mode of instability by using stability indices and energy margin. The method is a new version of our previous paper.[1] Case studies are showing very promising results.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.774-780
• /
• 2014

일반적으로 CFRP 레저선박의 상부구조물은 동급전장 타 선박보다 매우 작은 경향을 보이고 있는데, 이는 풍압면적에 의한 횡요저항력과 밀접한 관련이 있는 것으로 알려져 있다. 본 연구에서는 CFRP 레저선박의 이러한 상부구조물 형상 특성을 풍압면적 변화에 따른 복원안정성 분석을 통해 파악하고자 한다. GFRP 레저선박과 CFRP 레저선박의 선체 및 상부구조물 형상 특성을 상호 비교하고, CFRP 레저선박의 상부구조물 형상변화를 통해 그 변화가 복원안정성에 미치는 영향에 대해 분석하였다. 이를 위해 GFRP, CFRP 레저선박 총 10척의 형상을 비교, 분석하여 선체와 상부구조물 간의 형상 추세를 파악하였고, ISO 12217에 따른 횡요저항력 추정 및 복원안정성 평가 프로그램 개발을 통해 상부구조물의 형상 변화와 복원안정성 간의 관계를 분석하였다. 연구결과, CFRP 레저선박의 풍압면적 분포경향은 GFRP 레저선박과 비슷하였으나, 상대적으로 상부구조물 형상 비율은 절반정도 크기에 그치는 경향을 보였다. 또한 CFRP 레저선박의 상부구조물 크기를 동급전장의 GFRP 선박 상부구조물 면적 비율 이상(10%) 증가시키는 경우 횡요저항력에 의한 복원성능에 문제가 발생하는 것을 확인할 수 있었다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2018년도 공동국제학술발표회
• /
• pp.44-44
• /
• 2018

• Structural Engineering and Mechanics
• /
• 제89권3호
• /
• pp.309-321
• /
• 2024

In this paper, the effect of semi-rigid connections on the stability bearing capacity of cross-bracings in steel tubular transmission towers is investigated. Herein, a prediction method based on the hybrid model which is a combination of particle swarm optimization (PSO) and backpropagation neural network (BPNN) is proposed to accurately predict the stability bearing capacity of cross-bracings with semi-rigid connections and to efficiently conduct its probabilistic assessment. Firstly, the establishment of the finite element (FE) model of cross-bracings with semi-rigid connections is developed on the basis of the development of the mechanical model. Then, a dataset of 7425 samples generated by the FE model is used to train and test the PSO-BPNN model, and the accuracy of the proposed method is evaluated. Finally, the probabilistic assessment for the stability bearing capacity of cross-bracings with semi-rigid connections is conducted based on the proposed method and the Monte Carlo simulation, in which the geometric and material properties including the outer diameter and thickness of cross-sections and the yield strength of steel are considered as random variables. The results indicate that the proposed method based on the PSO-BPNN model has high accuracy in predicting the stability bearing capacity of cross-bracings with semi-rigid connections. Meanwhile, the semi-rigid connections could enhance the stability bearing capacity of cross-bracings and the reliability of cross-bracings would significantly increase after considering semi-rigid connections.

• 대한전기학회논문지:전력기술부문A
• /
• 제54권9호
• /
• pp.441-448
• /
• 2005

On-line dynamic security assessment is becoming more and more important for the stable operation of power systems as load level increases. The necessity is getting apparent under Electricity Market environments, as operation of power system is exposed to more various operating conditions. For on-line dynamic security assessment, fast transient stability analysis tool is required for contingency selection. The TEF(Transient Energy Function) method is a good candidate for this purpose. The clustering of critical generators is crucial for the precise and fast calculation of energy margin. In this paper, we propose a new method for fast decision of mode of instability by using stability indices. Case study shows very promising results.