• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.957-965
• /
• 2008

Recently, slope stability analysis in current design criteria is criticized for its unrealistic assumption of groundwater table and slope stability analysis incorporating seepage analysis considering rainfall is gaining a recognition as an alternative. However, a reasonable method for determining the rainfall used in the seepage analysis has not yet been established. Rainfall input for seepage analysis is a time series of rainfall and is similar to the hyetograph which is usually obtained from hydrology. In this paper a method to obtain the hyetograph from the intensity-duration-frequency is proposed. The resulting hyetograph can be used in the in the slope design stage. Also some considerations for practical application of slope stability analysis considering the rainfall is included.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1341-1347
• /
• 2023

This study proposes to ensure the seismic stability of an existing switchboard for emergency diesel generator by applying mode analysis, static analysis and dynamic analysis. First, a three dimensional model for the swithboard was made with simplification for mode analysis. Next, The mode analysis for the finite element model of the existing switchboard was performed. The 1st natural frequency below 33 Hz, the seismic safety cutoff frequency, was calculated to be 21.943 Hz. Finally, based on the seismic stability theory, the von-Mises equivalent stresses derived by structural analysis and response spectrum analysis under the normal and faulted conditions were 74.179 MPa and 49.769 MPa, respectively. These are less than specified allowable stresses. So seismic stability was confirmed.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.179-184
• /
• 2005

Shear strength parameters obtained from filed survey are important factors in the analysis of slope stability. In this study, sensitivity analysis was performed to evaluate the effect of input parameters on the analysis of slope stability. The input parameters selected for sensitivity analysis were slope angle, cohesion, and friction angle. Monte-Carlo Simulation method was used for calculating input parameters and the factor of safety was computed by means of limit equilibrium method. A rock slope, which has failed in the field, was used for the sensitivity analysis in the analysis of slope stability. The result of analysis shows that the factor of safety of the rock slope was a little low. From partial correlation coefficient(PPC) of input parameters determined from the sensitivity analysis, slope stability was dependant on cohesion and slope angle. The effect of friction angle was lower than that of cohesion and slope angle on slope stability.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.5
• /
• pp.75-82
• /
• 2005

Shear strength parameters obtained from field tests are important factors in the analysis of slope stability. In this paper, sensitivity analysis was performed to evaluate the effect of input parameters on the analysis of slope stability. The input parameters selected for sensitivity analysis were slope angle, cohesion, and friction angle. Monte-Carlo Simulation method was to estimate input parameters for sensitivity analysis in slope stability, and the limit equilibrium method was used to calculate the factor of safety of slope stability. A rock slope, failed in the field, was used for the sensitivity analysis of input parameters in the analysis of slope stability. The result of analysis shows that the factor of safety of the rock slope was a little low. From partial correlation coefficient (PCC) of input parameters from the sensitivity analysis, slope stability was dependant mainly on cohesion and slope angle. The effect of friction angle was smaller than those of cohesion and slope angle on slope stability.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.7
• /
• pp.574-578
• /
• 2001

The stability analysis for the fuzzy logic controller (FLC) has widely been reported. Furthermore many research in the FLC has been introduced to decrease the number of parameters representing the antecedent part of the fuzzy control rule. In this paper we briefly explain a single-input fuzzy logic controller (SFLC) or simple-structured FLC which uses only a single input variable. And then we analyze that it is absolutely stale based on the sector bounded condition. We also show the feasibility of the proposed stability analysis through a numerical example of a mass-damper-spring system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.325-329
• /
• 2003

In this paper. the stability and performance analysis of wave-based teleoperation system is presented. For stability and performance analysis with respect to the variation of characteristic impedance b, loop gains of communication channel and minimum value of trasmitted impedance from slave side to the master side are considered. The stability of slave side may be enhanced by increasing characteristic impedance b, whereas exssively high value of b may degrade the performance, which imply a tradeoff between stability and performance.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.11
• /
• pp.1163-1173
• /
• 1990

In the stability analysis of a synchronous motor, the considerations of the initial conditions, that is, field application points and the determination techniques of stability regions to assure stable operations over four quadrants are very important. In this paper, Lyapunov stability regions obtained from a newly proposed algorithm with Lyapunov function of simple type on the basis of numerical analysis method are shown to be true stability regions which can accurately pull in within 2 (rad) after field application.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.549-556
• /
• 2002

Geotextile tubes hydraulically or mechanically filled with dredged materials have been applied in hydraulic and coastal engineering in recent years(shore protection structure, detached breakwater, groins and jetty). It can also be used to isolate contaminated material from harbor, detention basin dredging, and to use this unit as dikes for reclamation work. Recently, new preliminary design criteria supported by model and prototype tests, and some stability analysis calculations have been studied. The stability analysis of geotextile tube is composed geotechnical and hydrodynamic analysis. The stability check points are sliding failure, overturning, bearing capacity failure against the wave attack. In this paper presented the construction procedure and in-situ measurement(properties of filling material, effective height variation, stress variation at geotextile tube bottom) of geotextile tube at Young-Jin Bay and stability analysis by theoretical method and hydraulic model tests

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.77-79
• /
• 1996

This paper presents an integrated stability analysis by the direct energy function method based on Equivalent Mechanical Model(EMM) which reflects the system behavior related to both angle and voltage stabilities. Actually, angle and voltage stability are intimately related in power system, so complete decoupling of these stability analysis is not possible in general, particularly in stressed power systems. In this paper, it is shown that a identical energy function can be used for angle and voltage stability analysis. The proposed energy function reflects the line resistances and reactive powers under the constraints of the same R/X ratio. The energy margin between UEP and SEP presents a good collapse proximity index in both types of stability analysis.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.557-560
• /
• 2008

In this paper, it discusses about the stability of rock slope of pyroclastic rock, which can easily meet at construction site. Basically carry out the investigation about the development of a surface of discontinuity, too. With that, it refers to the basic groups of sedimentary rock, treats of general details about investigation of rock slope and stability analysis, and discusses general characteristics and stability analysis case study about rock slope of pyroclastic rock. Achieved basic geological investigation on rock slope of pyroclasic rock, and examine the stability of slope by doing limit equilibrium and geometric stability analysis due to the result of investigation. It is considered to be able to accumulate many data about slope design of pyroclastic rock hereafter estimating degrees of rock mass properties of pyroclastic rock quantitatively.