• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.829-830
• /
• 2006

The line-start permanent magnet synchronous motor has a high efficiency and an advantage in constant speed operation regardless of the effect of load variation. However it is difficult to predict the performance of characteristics accurately, because of the unbalanced starting torque with the initial starting position of the rotor and the generation of a break torque. In this paper the dynamic characteristics of the line-start permanent magnet synchronous motor are described and compared with those of the squirrel-cage induction motor through the simulation to find the characteristics of the permanent magnets and the rotor bars in the line-start permanent magnet synchronous motor.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.779-780
• /
• 2006

This paper describes the effects of rotor-bar broken in induction machines. The analysis has been made on 7.5kW, 4P, 1,768[rpm], three-phase induction motors in a healthy and broken-rotor bars fault conditions at rated loading conditions. The effects of the rotor-bar broken, magnetic force are investigated by finite element method (FEM) and experiment. The results can be useful for real-time on-line monitoring of an induction motor.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.51-53
• /
• 1997

Even though, many types of induction motors are known, most of the single phase induction motors being used are of squirrel cage type. However, basic structure of the machine has not been changed a lot during the past century. Author had been experienced many experiments with modified rotor. The modification was completed by doing two procedures: an elimination of lamination in central pan of the rotor and filling of melted aluminium in it instead. This paper demonstrates the reason for higher efficiency.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.7-14
• /
• 2014

Aircraft variable frequency power and a new application of induction motor under the aero-power are introduced. The transient models and simulation of induction motor are reviewed. A new transient model and simulation method is presented that includes deep-bar effect and magnetic saturation. Dynamic magnetizing inductance, rotor resistance and leakage reactance are considered as varying parameters in state-space model. Base on known rotor structure and speed, these parameters can be calculated.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.6
• /
• pp.82-89
• /
• 2011

Reactive power support is considered to be necessary for dealing with a voltage stability issue with wind turbine system employing squirrel-cage induction generator(SCIG). This paper analyses steady-state characteristics of the SCIG wind turbine system by simulating torque-slip characteristics of SCIG with respect to variations of interconnecting network strength and generator terminal voltage. It also presents dynamics analysis of SCIG wind turbine system on Simulink to investigate the impact of static var compensator(SVC) and static synchronous compensator(STATCOM) on transient stability enhancement. It analysed transient stability with varying fault duration times and compared the transient stability characteristics with varying rated capacities of SVC and STATCOM. It is shown that the STATCOM has a better performance and reactive power support compared to SVC.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.110-111
• /
• 2013

전원의 변동이 심한 전압원을 사용하는 선박, 전기자동차 등에서는 DC-Link전압이 가변하기 때문에 낮은 영역의 전압에서는 최대출력 운전을 할 수가 없다. 낮은 영역의 전압에서 최대 출력을 하기 위하여 유도전동기 ${\Delta}$결선 운전을 해야 하지만 ${\Delta}$결선 운전시 높은 입력 전류로 인하여 인버터 전력소자의 온도가 상승하게 된다. 따라서 유도전동기 Y결선 운전을 하고 부족한 출력은 유도전동기 약계자 제어를 하여야 한다. 본 논문은 가변 DC-Link 전압에서 최소의 상전류로 전력소자와 유도 전동기의 상태에 따라 최대출력 운전을 하는 약계자 제어 알고리즘을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.73-75
• /
• 1999

The time harmonics of an inverter output voltage cause high frequency currents in the rotor bars of a squirrel cage induction motor, so that the harmonic copper loss density increases in the upper lesion of the bars. Such an higher loss density makes an nonuniform thermal source and deforms the bars due to the thermal stress. Therefore, in this paper, the copper loss distribution in the rotor bar of an inverter-fed induction motor, which is the source of the thermal stress, is analyzed by the time-stepping finite element method. As a result, the harmonic copper losses of 11 subregions in a bar are calculated and compared with those of sinusoidally fed induction motor.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1264-1266
• /
• 2000

본 논문에서 비교하는 두 시스템은 모두 전력계통에서 발생할 수 있는 고조파 전류를 효과적으로 보상할 수 있는 시스템이다. 전력계통에서 고조파전류는 계통전압에 장해를 주기 때문에, 프릿카나 각종 전력용기기의 발열 진동, 소음 혹은 유도잡음 장해등의 원인이 된다. 따라서, 이에 대한 대책이 중요한 문제가 되고 있다. 본 논문은 이러한 고조파보상 시스템의 새로운 형태로써, 플라이휠에 의해서 만들어지는 에너지 저장시스템에, 전압형 PWM 인버터를 병용하여 순시제어가 가능한 시스템을 설계하는 것이다. 그리고 여기에 사용되는 회전기로 각각 권선형과 농형을 사용하여 시스템을 구성하고 그 특징과 장/단점을 비교 분석하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.433-440
• /
• 2007

In this paper a new dynamoelectric winch system is introduced which is widely applied in shipping. building, architecture and so on. Generally in the winch system the squirrel cage induction motor is used as prime mover and line voltage is directly applied to the induction motor during operation. So it is difficult to obtain the smoothing revolution. because of variation of the weight of cargo and system operating method. Based on above reasons, the switched reluctance motor (SRM) is proposed to replace the induction motor because of more reliable mechanical structure, better traction characteristic and higher efficiency compared to induction motor. And in order to solve smoothing revolution problem, instantaneous torque control method based on torque sharing function (TSF) is used. Finally the validity of the proposed method is verified through the simulation and experimental results.

• Advances in Energy Research
• /
• v.3 no.3
• /
• pp.133-142
• /
• 2015

A large wind farm can be simplified by the aggregated wind farm models for load flow, steady and transient stability studies. When a fault (such as a short circuit) happens in a large wind farm, some of wind turbines trip while others do not. This paper is to design a controller to modify the aggregated wind farm model in the case of one or more unit removed or added from the complete model. This is without stopping the simulation process during performing the steady state and transient analysis of the whole system. This controller can modulate the status of the wind turbines in the aggregated model in a given farm according to any change in this farm. By this controller, we save effort and time to change the status of wind turbines in the aggregated model. The proposed wind farm is composed of some smaller farms of permanent magnet synchronous generators (PMSGs) and others of squirrel cage induction generators (SCIGs).