• 한국식품과학회지
• /
• 제12권4호
• /
• pp.285-291
• /
• 1980

아끼바레 및 밀양 23호의 수화 및 취반속도를 비교하였다. 수화속도는 $10{\sim}40^{\circ}C$ 범위에서 무게증가로서 측정한 결과, 수화시간의 평방근의 비례하였다. 확산 계수는 Arrhenius 방정식으로 표시되었다. 아끼바레의 확산계수는 $3.151{\times}10^{-3}\exp(-4000/RT)$, 밀양 23호는 $5.853{\times}10^{-3}\exp(-5700/RT)$로 표시될 수 있었다. 취반속도는 밀양 23호가 아끼바레보다 빨랐으며 취반활성화에너지는 $90{\sim}100^{\circ}C$에서 밀양 23호가 아끼바레보다 다소 높았다. 밥의 조직특성은 밀양 23호의 부착성이 아끼바레보다 높았고, 아밀로 그라프의 점도도 밀양 23호가 높았다.

• Transactions on Electrical and Electronic Materials
• /
• 제6권6호
• /
• pp.276-279
• /
• 2005

Influences of sustain pulse-width on electrical characteristics and luminous efficiency are experimentally investigated for surface discharge of AC-PDP. A square pulse with variable duty ratio and fixed rising time of 300 ns has been used in the experiment. It is found that the memory coefficient is significantly increased at the critical pulse-width. And the wall charges and wall voltages as well as capacitances are experimentally measured by Q- V analysis method along with the voltage margin relation, in terms of the sustain pulse-width in the range of $1{\mu}s$ to $5{\mu}s$ under driving frequency of 10 kHz to 180 kHz. And the luminous efficiency is also experimentally investigated in above range of sustain pulse-width with driving frequency of 10 kHz to 180 kHz. It is noted that the luminous efficiency for 10 kHz and 180 kHz are 1.29 1m/W and 0.68 1m/W respectively, since the power consumption for 10 kHz is much less than that for 180 kHz. It has been concluded that the optimal sustain pulse-width is in the range of $2.5 {\~}4.5{\mu}s$ under driving frequency range of 10 kHz and 60 kHz, and in the range of $1.5 {\~} 2.5{\mu}s$ under driving frequency range of 120 kHz and 180 kHz based on observation of memory coefficient, and wall voltage as well as luminous efficiency.

• 복식문화연구
• /
• 제18권5호
• /
• pp.991-1002
• /
• 2010

Nowadays, personal media is a new tool for communication as digital cameras and mobile phones are developing rapidly. We are concerned over Cyworld users who could have different personal characteristics which will influence on buying patterns in on line shopping behaviors. The purpose of this research was to observe fashion attitudes and purchase behavior of Cyworld mini homepage users, for establishing marketing strategies by understanding consumers. For this study, one line survey was used for 500 male and female subjects who are 20 to 40 years old. Only reliable 441 questionnaires were used for analysis. The SPSS program was used for frequency, K-means cluster, t test, and chi-square test. A total of 441 respondents were clustered on the basis of 8 item self-disclosure scale, using the K-means procedures. The results indicated that respondents were clustered into two segments; 267 respondents(active attitude towards self-disclosure) and 164 ones(not active). We examined fashion attitudes in mini home page and buying behavior by self-disclosed variable. Those who are involved actively in self expression and self-disclosure considered more fashion style and trend. The major motivates of web surfing was finding a good design, and good price. High self-disclosure group tends to search many shopping mall for right design and low self disclosure group tends to search them for the right price. High self-disclosure group tend to shop the fashion products more, while low self disclosure group tend to purchase books more through the internet. We realized that active group in self-disclosure purchased their clothing accidently when they visit Cyworld.

• 동굴
• /
• 제14권15호
• /
• pp.42-90
• /
• 1987

제주화산도의 암석학에 대한 암석기재 및 총화학 조성의 63종은 이문원에 의해 보고되고 있다. 총화학조성 데-타는 FORTRAN77의 프로그램에 의해 해석을 하였다. 해석에는 우선 최소자집법에 의해 환산식과 산분도를 검토했다. 다음에 통계적 데-타는 평균치, 최대치, 최소치, 범위, 표준편차, 분산, 표준오차 및 변동계수를 구했다. 표준편차의 큰 단위 물질은 SiO$_2$, MgO 및 FeO이고 작은 단위 물질은 MnO와 P$_2$O$_{5}$이다. 표준오차와 분산은 표준편차와 매우 유사한 조항이 있다. 그렇지만 변동계수는 표준편차와 다르다. 여기에서 큰 단위 변동계수는 $H_2O$$^{-}$ 및 $H_2O$$^{+}$이고, 작은 단위 변동계수는 $Al_2$O$_3$ 및 SiO$_2$ 이다. 상관계수의 계산은 정과 부의 상관성을 SiO$_2$, $Al_2$O$_3$ 및 TiO$_2$에 대해서 다른 조성과의 관계를 계산적으로 구할수 있다.

• Applied Biological Chemistry
• /
• 제26권1호
• /
• pp.1-7
• /
• 1983

일반 품종(아끼바레와 밀양 15) 및 다수확품종(밀양 30, 수원 287, 수원 294와 이리 342)의 벼를 무게비로 8% 도정하고, 쌀을 온도 $4{\sim}32^{\circ}C$에서 $5{\sim}50$분간 침지시키면서 수화속도를 비교하였다. 침지시간 50분후의 쌀의 평형 수분함량은 아끼바레와 밀양 15가 30%내외, 수원 287과 밀양 30이 29%내외이었고, 수원 294와 이리 342는 다소 낮은 값을 보였다. 물의 확산계수는 아끼바레는 밀양 14와, 밀양 30은 수원 287과, 수원 294는 이리 342와 비슷한 값을 보였다. 확산계수는 밀양 30과 수원 287이 가장 컸으며, 수원 294와 이리 342가 가장 작았다.

• Journal of Information Processing Systems
• /
• 제15권6호
• /
• pp.1277-1295
• /
• 2019

With its technical development, digital printing is being universally introduced to the mass production of clothing factories. At the same time, many fashion platforms have been made for customers' participation using digital printing, and a tool is provided in platforms for customers to make designs. However, there is no sufficient solution in the production stage for automatically converting a customer's design into a file before printing other than designating a square area for the pattern designed by the customer. That is, if 30 different designs come in from customers for one shirt, designers have to do the work of reproducing the design on the clothing pattern in the same location and in the same angle, and this work requires a great deal of manpower. Therefore, it is necessary to develop a technology which can let the customer make the design and, at the same time, reflect it in the clothing pattern. This is defined in relation to the existing clothing pattern with digital printing. This study yields a clothing pattern for digital printing which reflects a customer's design in real time by matching the diagram area where a customer designs on a given clothing model and the area where a standard pattern reflects the customer's actual design information. Designers can substitute the complex mapping operation of programmers with a simple area-matching operation. As there is no limit to clothing designs, the variousfashion design creations of designers and the diverse customizing demands of customers can be satisfied at low cost with high efficiency. This is not restricted to T-shirts or eco-bags but can be applied to all woven wear, including men's, women's, and children's clothing, except knitwear.

• 대한조선학회지
• /
• 제14권1호
• /
• pp.1-10
• /
• 1977

The major objects of this report are to supplement data of natural frequencies of thin elastic rectangular plates to the available data, and to give an experimental verification for natural frequencies obtained by Rayleigh-Ritz method, the generation set of which are eigenfunctions of Euler beams. For the first object the following five models, for which data only for the fundamental mode or data only for square plates are available, are adopted; (1) two opposed edges are clamped and the other two opposed edges simply supported (C-C, S-S), (2) one edge is simply supported and the other three edges clamped (C-C, C-S), (3) one edge is free and the other three edges clamped (C-C, C-F), (4) two adjacent edges are clamped and the other two adjacent edges free (C-F, C-F). For the (C-C, S-S) model the frequency equation obtained with the mode shapes assumed as of a single trigonometric series is solved. And for the other four models Rayleigh-Ritz method taking eigenfunctions of Euler beams as the generating set is applied. The numerical examples are obtained up to the fourth, the fifth or the sixth order depending on the range of the aspect ratio (0.1-10.0). The number of terms in the generating set for Rayleigh-Ritz method is fifteen for all models. For the experiment three models made of 3.2mm thickness mild steel plate for general structure use were prepared in following size; $300mm{\times}600mm,\;600mm{\times}600mm\;and\;900mm{\times}600mm$. Their boundary conditions are made to fit (C-C, C-F) condition. From the experiment mechanical impedance curves based on the frequency response method were obtained together with phase relation diagrams. The experimental data are resulted in good conformity to calculated values.

• 대한전자공학회논문지TC
• /
• 제46권2호
• /
• pp.53-59
• /
• 2009

다중사용자 다중 송수신 안테나 시스템의 전송 효율을 높이기 위해 기지국은 여러 사용자에게 동시에 데이터를 전송해야 하고, 이러한 경우 사용자간 간섭이 발생하게 된다. 본 논문에서는 포스트-프로세싱 리키지를 각 사용자의 수신 결합 후 어떤 사용자의 신호에 의해 다른 사용자들에게 나타나는 간섭 전력의 합으로 정의한다. 또한 이것을 이용하여 새로운 성능계수인 신호 대 포스트-프로세싱 리키지 및 잡음비를 정의한다. 사용자간 간섭에 대처하기 위해 기존 기법들은 사용자간 간섭을 완전히 제거하는데 집중하는 반면, 본 논문에서는 각 사용자가 최소 평균 제곱 오차 결합 방법을 사용한다고 가정하고 신호 대 포스트-프로세싱 리키지 및 잡음비 최대화하는 방법을 제안한다. 제안된 기법은 안테나 수에 대한 조건을 필요로 하지 않는다는 장점이 있다. 모의 실험을 통하여 제안된 기법은 사용자간 간섭을 완벽히 제거하는 기법보다 채널 추정 오차가 있을 때 우수함을 보인다.

• 생물정신의학
• /
• 제25권2호
• /
• pp.31-37
• /
• 2018

Objectives The aim of this study was to evaluate the psychopathological features such as depression and anxiety in schizophrenics with obsessive-compulsive symptoms (OCS) as well as the severity of OCS according to duration of schizophrenia. Methods We randomly selected sixty four inpatients with schizophrenia. We classified the patients into two groups (OCS group, non-OCS group) according to the Yale-Brown Obsessive-Compulsive Scale (Y-BOCS). Clinical and demographic features were evaluated. To assess OCS, Y-BOCS were performed. The Korean version of the Positive and Negative Syndrome Scale(K-PANSS), the Brief Psychiatric Rating Scale (BPRS), the Korean version of the Calgary Depression Scale for Schizophrenia (K-CDSS), the Beck Anxiety Inventory (BAI) and the Satisfaction With Life Scale (SWLS) were conducted. Independent t-test and chi-square test were conducted to compare the two groups. Pearson correlation analysis was performed to examine the relationship between the duration of schizophrenia and the Y-BOCS score. Results The Y-BOCS, K-CDSS, and BAI scores were higher in the OCS group. There was a significant correlation between the duration of schizophrenia and the Y-BOCS score. Conclusions Anxiety and depression symptoms were severe in the OCS group. In addition, the results of this study indicate that the longer duration of schizophrenia, the more severe the OCS. Therefore, the evaluation of OCS in schizophrenics should be accompanied by treatment intervention.

• 전자공학회논문지SC
• /
• 제49권4호
• /
• pp.36-44
• /
• 2012

전기 임피던스 단층촬영법은 대상물의 경계면에 부착된 여러 개의 전극들을 통해 전류를 주입하고 이에 유기되는 전압을 측정한 후, 이를 바탕으로 대상물 내부의 도전율(또는 저항률) 분포를 영상으로 복원하는 비교적 새로운 영상복원 기법이다. 본 논문에서는, 대상물 내부의 저항률 분포를 추정하기 위해서 전극사이의 전기저항과 저항률 분포와의 관계를 선형으로 가정하고, 이 선형 관계로부터 가중행렬을 계산한 후, 수정된 반복 Landweber 알고리즘을 적용하였다. 그리고 제안한 방법의 수렴시간을 줄이고 영상 복원의 정확도를 향상시키고자 목적 함수를 최소화하는 최적의 step length를 찾아 제안한 방법에 적용하였다. 몇 가지 시나리오를 설정하고 모의실험을 통해 제안된 방법의 영상 복원 성능을 평가한 결과, 비교적 양호한 복원 성능을 나타내었다.