• Earthquakes and Structures
• /
• 제11권1호
• /
• pp.25-43
• /
• 2016

The uneven distribution of rolling friction coefficient may lead to great uncertainty in the structural seismic isolation performance. This paper attempts to improve the isolation performance of a spring-damper-rolling isolation system by artificially making the uneven friction distribution to be concave. The rolling friction coefficient gradually increases when the isolator rolls away from the original position during an earthquake. After the spring-damper-rolling isolation system under different ground motions was calculated by a numerical analysis method, the system obtained more regular results than that of random uneven friction distributions. Results shows that the concave friction distribution can not only dissipate the earthquake energy, but also change the structural natural period. These functions improve the seismic isolation efficiency of the spring-damper-rolling isolation system in comparison with the random uneven distribution of rolling friction coefficient, and always lead to a relatively acceptable isolation state even if the actual earthquake significantly differs from the design earthquake.

• 한국자동차공학회논문집
• /
• 제21권2호
• /
• pp.55-62
• /
• 2013

An analytical procedure to determine a proper profile of the spring rail that generates intended contact pressure distribution in the flat wiper blade is introduced. The flat wiper blade is one piece blade and subjected to pressing force at a center point. In this type of blade, contact pressure distribution in the tip of rubber strip is determined by the pressing force, the initial profile of the blade before contact and bending stiffness of the blade. Experimentally obtained bending stiffness of the blade assembly is almost identical to that of the spring rail. Principle of reciprocity has been used to define the initial profile of spring rail from the deformed profile that is assumed to be identical to the windshield glass profile. The procedure has been verified experimentally by measuring the contact pressure of the blade assembled with the spring rail designed by the procedure proposed here. Measured contact pressure distributions of the blades show good agreements with intended distributions over the entire blade span. Consequently, it can be concluded that proposed procedure has relatively good accuracy in developing the spring rail for flat blade having a specific contact pressure distribution.

• 한국환경과학회지
• /
• 제6권4호
• /
• pp.303-311
• /
• 1997

The characteristics of spring machanism In the Cheju Island were analyzed by statistical techniques. Basic characteristics, areal and altitudinal variations, and correlations of spring data were investigated. In this study. however, the subjects of the study are the 451 springs, the whole basin of Cheju Island derided Into four groups. In this study, analyzed the spring phenomena on the basis of both the geologic elements and the topogaphic elements. Also, the spring zone In Cheju Island are classified Into three types that the mountain area, the muddle area, the coastal area in spring distribution by attitude. The quentity of spring and variability show subvariety on the average according to Meinzer's classilfication and the whole basin of spring shows various distributions from Third to Sixth. The results of this study can be utilized to evaluate the condition of groundwater development In Cheju Island.

• Earthquakes and Structures
• /
• 제13권6호
• /
• pp.551-559
• /
• 2017

A large number of isolation systems are designed without considering the non-uniform friction distribution in space. In order to analyze the effects of non-uniform friction distribution on the structural response of isolation system, this paper presented a simplified rolling-damper-spring isolation system and analyzed the structural responses under earthquakes. The numerical results indicate that the calculation errors related to the peak values of structural acceleration, relative displacement and residual displacement are sequentially growing because of the ignorance of non-uniform friction distribution. However, the influence rule may be weakened by the spring and damper actions, and the unreasonable spring constant may lead to the sympathetic vibration of isolation system. In the case when the friction variability is large and the damper action is little, the non-uniform friction distribution should be taken into consideration during the calculation process of the peak values of structural acceleration and relative displacement. The non-uniform friction distribution should be taken into full consideration regardless of friction variability degree in calculating the residual displacement of isolation system.

• 대한치과교정학회지
• /
• 제29권5호
• /
• pp.521-534
• /
• 1999

본 연구는 상악 견치, 상악 제 2 소구치, 상악 제 1 대구치의 유한요소 모델을 제작하였고, $0.018{\times}0.025$ 인치 Stainless steel wire를 고정원 강화를 위해 상악 제 2소구치와 제 1대구치에 위치시켰다. $0.017{\times}0.025$ 인치 T-loop spring의 전후방적 위치에 따른 응력 분포를 알아보기 위해 T-loop spring의 중간이 견치와 제 1대구치 거리의 중간에 위치하는 것과, 2mm전방에 위치하는 것, 2mm후방에 위치하는 것의 3가지 유한 요소모델을 제작하였다. 이 T-loop spring을 6mm 강제변위시켜 발생하는 힘을 각 치아에 적용시켰으며, 견치에서 발생하는 힘과 응력에 대하여 다음과 같은 결론을 얻었다. 1. 3가지 형태 모두에서 유사한 크기의 후방견인력을 보였다. 2. 3가지 형태 모두에서 유사한 크기와 비슷한 형태의 응력 분포를 보였다. 3. 3가지 형태 모두에서 회전 중심은 치근단 2/3 부분에 보였다. 4. 2mm 전방 위치된 T-loop spring과 2mm 후방 위치 된 T-loop spring에 각각 함입력과 정출력을 보이지만 그 크기가 작아서 응력 양상에 영향을 주지 못한다.

• 대한치과교정학회지
• /
• 제21권2호
• /
• pp.353-366
• /
• 1991

This study was performed to analyze the effects of forces to the alveolar bone by various molar uprighting spring such as helical uprighting spring. T-loop spring, Modified T-loop spring and open coil spring. The simplified two-dimensional photoelastic model was constructed with a lower left posterior quadrant containing the second molar, the first and second premolars and the canine, with the first molar missing. Several molar uprighting springs were fabricated from 0.017 by 0.022 inch blue Elgiloy and applied to the photoelastic model. Two-dimensional photoelastic stress analysis was performed, and the stress distribution was recorded by photography The results obtained were as follows; 1. In all the kinds of the springs, the center of rotation of the mandibular second molar was oserved at the apical 1/5-1/6 between the alveolar crest and the root apex. 2. In all the kinds of the spring, the stress induced in the mesial root surface of the mandibular second molar was relatively homogeneous but there was some difference in the magnitude of the stress. 3. In the kinds of the springs, the distal crown tipping moment of the second molar was increased in turn as open coil spring, helical uprighting spring, T-loop spring, and modified T-loop spring. 4. The largest extrusive force was occured in the T-loop spring, intrusive force was occured in Modified T-loop spring only, and the largest distal tipping force was occured in open coil spring. 5. In the T-loop spring with activation, the stress induced in the mesial root surface of the second molar was increased gradually from the root apex to the alveolar crest and highly concentrated in the alveolar crest.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.621-625
• /
• 2008

There are nine hot spring wells at Icheon hot spring area, hot springs are pumped by submersible motor. Drilling depths of hot spring wells is about 166-294 m, piezometric heads of hot springs is about 50 m below the surface. The geothermal gradient of SB-2 is about $64.00^{\circ}C$/km from the surface to depth within 300 m which is the highest value, that of SB-1 is about $45^{\circ}C$/km which is the lowest value. In addition, the average geothermal gradient of the region is calculated at approximately $54.28^{\circ}C$/km. However, it is analysed that this area has highly irregular temperature distribution because the groundwater penetrated to the depth of 720 m through the fracture rise to the surface according to the results of the data after drilling well to the depth of 996 m.

• 한국환경과학회지
• /
• 제9권6호
• /
• pp.483-488
• /
• 2000

In this study, the distribution characteristics of volatile organic compounds (VOCs) were investigated on the seasonal basis across spring, summer, and fall during the year of 1998. According to this analysis, most VOC species investigated exhibited strong temporal trends. Over diurnal scale, there distribution characteristics were affected by seasonal factors strongly. While they showed high day/night ratio pattern during spring, the pattern was reversed during fall. When the seasonal mean values were compared between the two seasons, the spring values were systematically higher than their counterparts in most cases. In addition when our VOC measurement date were compared with those reported from elsewhere, we were able to conclude that the VOC levels in the study area are comparable to the level weakly impacted by the regional emissions of VOCs. Although our data are not sufficient enough to systematically explain the atmospheric distribution and behavior of VOCs, the findings of strong correlations among some of VOC species suggests strong need for investigating their interactions in the earth\`s atmosphere.

• Journal of Plant Biology
• /
• 제29권2호
• /
• pp.117-127
• /
• 1986

Phytoplankton community was investigated at the Paldang Dam Reservoir in the Mid-Han River by it's depth, in spring and summer known as the period of phytoplankton's blooming. It was only in summer that phytoplankton bloomed at the investigated area. 128 kinds of phytoplankton were identified and of them, diatoms were abundunt in spring but cyanophyta and chlorophyta were in summer. Because some species with high pollution index were observed in summer, it could be proved that the investigated area was polluted especially in summer. In spring shown the circulation period by vertical distribution pattern of chlorophyll-a and isothermal distribution pattern of water temperature, maximum value of phytoplankton standing crops appeared at the upper layer, except for surface layer. In summer shown the circulation period after the stagnation period by vertical distribution pattern of chlorophyll-a and immediate destruction after stratification of water temperature, maximum value of phytoplankton standing crops appeared at the lower layer. the layer at which the maximum value of chlorophyll-a appeared also accorded with that of phytoplankton standing crops. So, it could be approved that there existed a close relationship among phytoplankton standing crops, chlorophyll-a, and water temperature.

• 한국초지조사료학회지
• /
• 제11권1호
• /
• pp.17-21
• /
• 1991

A field experiment was carried out to determine the effects of nitrogen(N) fertilization levels(0, 30, 60, 90 and 120 kg/ha) in early spring on the growth, dry matter(DM) yield, seasonal distribution of production and nutritive value of grasses. Additional N after the first, second and third harvest were applied as 60, 60 and 30 kg/ha, equally in 1989. Grass growth and DM yield were significantly increased(p$NO_3$-N concentration was not affected by N level of early spring. It is suggested that, therefore, N application in early spring is essential, and 60 to 90 kg/ha of N application may be desirable in early spring.