• Korean journal of applied entomology
• /
• v.43 no.1
• /
• pp.71-79
• /
• 2004

Toxicities of 42 pesticides (13 acaricides, 13 insecticides, 13 fungicides and 3 adjuvants) commonly used to control rose insect, mite, and disease pests were evaluated to the two-spotted spider mite, Tetranychus urticae egg and adult, and its predator Phytoseiulus persimilis egg, nymph and adult at the recommended concentration. The effect of density suppression of T urticae by predatory mite and pesticide mixture on the rose in the greenhouses was also investigated. Among 13 acaricides tested, acequinocyl, bifenazate, fenbutatin oxide and spirodiclofen showed much less toxicity to P. persimilis than to T urticae. Among insecticides, acetamiprid, imidacloprid, spinosad, thiamethoxam and acetamiprid＋etofenprox showed low toxicity to P. persimilis. and T ruticae. Among 13 fungicides, azoxystrobin, kresoxim-methyl, myclobutanil, nuarimol, triadimefon, triflumizole and oxadixyl＋mancozeb had a negligible effect on P. persimilis and T. urticae. Among three adjuvants, cover and siloxane expressed high toxicity, while spreader showed very low toxicity to P. Persimilis. In the greenhouses experiments, the density of T urticae before treatment was 65.3 mites per leaf. However, their density after release about 30 predatory mites per rose abruptly decreased from 3.8 mites at 11th day to zero mite at 20th day. During survey periods, four treatments of fungicides (kresoxim-methyl, myclobutanil, nuarimol, triflumizole) for the control of Sphaerotheca pannosa and one treatment of insecticide (spinosad) the control of Frankliniella occidentalis were applied, and these treatments had no the pesticides had no effect on the predatory mite density. It may be suggested from these results that four acaricides, five insecticides, seven fungicides, and one adjuvant could be incorporated into the integrated T. urticae management system with P. persimilis on rose cultivation.

• 대한공업교육학회지
• /
• v.37 no.2
• /
• pp.1-19
• /
• 2012

In this study, to figure out the demands for learning, a survey was conducted on learning organization agents participating in learning organization project supported by public fund, through measuring their awareness level of the role and tasks drawn from the precedent study. This questionnaire was developed with four roles and twenty competencies drawn from the precedent study. After conducting the survey on over 200 small and medium corporations participated in learning organization project, the data was analyzed about the role and competency from 123 answer sheets collected. The results were as following First, the awareness of role importance was higher(4.36) than present level(3.73), and was important in order of innovator, operator, spreader, promoter. Second, in competitive importance of learning organization agents, the role of spreader was high, that of promoter was low. Third, in awareness level of learning organization agents, the demand level was generally high(4.1), but acquired level was generally low, so there was a wide gap between the demand level and acquired level. Forth, From the analysis result of those data about work competency of learning organization agents, learning organization promoter and learning leader, KMS operator ability and outcome were come out to be necessary, and next administrative ability about organization changes were come out to be necessary.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.2979-2995
• /
• 2017

In recent years, there has been an increasing number of studies focused on identifying a set of spreaders to maximize the influence of spreading in complex networks. Although the k-core decomposition can effectively identify the single most influential spreader, selecting a group of nodes that has the largest k-core value as the seeds cannot increase the performance of the influence maximization because the propagation sphere of this group of nodes is overlapped. To overcome this limitation, we propose a neighborhood coreness cover and discount heuristic algorithm named "NCCDH" to identify a set of influential and decentralized seeds. Using this method, a node in the high-order shell with the largest neighborhood coreness and an uncovered status will be selected as the seed in each turn. In addition, the neighbors within the same shell layer of this seed will be covered, and the neighborhood coreness of the neighbors outside the shell layer will be discounted in the subsequent round. The experimental results show that with increases in the spreading probability, the NCCDH outperforms other algorithms in terms of the affected scale and spreading speed under the Susceptible-Infected-Recovered (SIR) and Susceptible-Infected (SI) models. Furthermore, this approach has a superior running time.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.827-834
• /
• 2000

A granular herbicide applicator attached to conventional ride-on rice transplanter with 6 rows was developed in order to carry out both transplanting and herbicide application at once. It resulted in labor saving by 98%. The prototype is composed of a metering device and a spinning disc spreader. The application rate per 10a can be varied from 1 to 3 kg and the application swath is 1.8 m, which is the planting width of the ride-on rice transplanter with 6 rows. The angular speed of spinning disc and the application height were used as design factors to obtain the uniform distribution of herbicide granules. As the result of experiment, the distribution uniformity showed a tendency to be proportional to the increases of both spinner angular speed and application height. The prototype with angular speed of spinning disc of 7359 rpm and the application height of 20 cm was made and its distribution uniformity was relatively uniform with the CV(coefficient of variation) of 21.7%. In field test, when the tested herbicides such as ACl40+Stomp and Londax+YRC were applied, the weed control has continued for 65 days since transplanting was done.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.165.1-165.1
• /
• 2016

표면활성화 접합은 이종 소재의 표면을 제어하여 직접 접합하는 기술이다. 본 연구에서는 표면활성화 접합을 이용하여 고 방열특성의 LED용 히트스프레더(heat spreader)를 제작하기 위하여 $Al-Al_2O_3$ 복합소재를 제조하였다. LED 제품의 히트스프레더는 LED에서 발생하는 열을 한 곳으로 집중하는 것을 막아 열을 분산하는 금속판을 의미한다. 최근의 LED 제품은 고출력화에 의한 발열량의 급증으로 MCL(Metal Clad Laminate)를 이용하여 LED 칩에서 발생된 열을 외부로 배출하는 모듈구조를 나타내는 경우가 대다수이다. LED에서 열이 증가하게 되면 LED의 효율이 감소하고, 수명이 줄어드는 현상을 보이기 때문에 방열특성은 매우 중요하다. 따라서 고출력화되어 LED 칩에서 발생되는 열을 제어하는 기술이 이슈화 되고 있다. 기존의 히트스프레더 구조는 통상적으로 Al/절연층(폴리머)/Al으로 폴리머의 열전도율이 1W/mk로 고출력화에 의해 급증하는 LED의 발열량을 충분히 해소시키기 어렵다. 본 연구에서는 급증하는 LED의 방열량을 해소시키기 위해서 기존의 Al/폴리머/Al의 구조를 $Al/Al_2O_3/Al$의 구조로 개발하기 위해서 HV-SCDB 기술을 이용한 $Al-Al_2O_3$ 복합소재 제조 및 접합특성에 관하여 연구하였다.

• Journal of Chest Surgery
• /
• v.32 no.7
• /
• pp.648-652
• /
• 1999

Background: Bullectomy through a transaxillary minithoracotomy have been widely used in the treatment of primary spontaneous pneumothorax. Material and Method: From September 1997 to September 1998, 22 consecutive cases of those who underwent transaxillary mini thoracotomy with Finochieto rib spreader(group F) and 24 consecutive cases with Naruke thoraco-opener(group N) at Taegu Fatima Hospital were reviewed retrospectively to compare the clinical results of transaxillary minithoracotomy with different rib spreaders in the opera tive treatments of primary spontaneous pneumothorax. Result: There were no significant differences in operative time, hospital stay, postoperative hospital stay, the duration of the indwelling chest tube, and the number of postoperative recurrences and complications in the two group. CONCLUSION This technique may be useful in the operative treatments of primary spontaneous pneumothorax.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.7
• /
• pp.53-64
• /
• 2001

The gain-scheduling control technique is vary useful in the control problem incorporating time varying parameters which can be measured in real time. Based on these facts, in this paper the sway control problem of the pendulum motion of a container hanging on the trolly, which transports containers from a container ship to trucks, is considered. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, the trolley motion control strategy is introduced and applied. But, in this paper, we introduce and synthesize a new type of swing motion control system. In this control system, a small auxiliary mass is installed on the spreader. And the actuator reacts against the auxiliary mass, applying inertial control forces to the container to reduce the swing motion in the desired manner. In this paper, we assume that an plant parameter is varying and apply the gain-scheduling control technique design the anti-swing motion control system for the controlled plant. In this control system, the controller dynamics are adjusted in real-time according to time-varying plant parameters. And the simulation result shows that the proposed control strategy is shown to be useful to the case of time-varying system and, robust to disturbances like winds and initial sway motion.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1112-1118
• /
• 2004

Automated container terminals have been developed over the world years and many countries are interested in them because the amount of containers exported or imported is rapidly increasing. The conventional container terminals were not designed to handle this kind of heavily many containers. They would face many structural problems soon or later, although they have been managed to do well so far. One of the most important things in automated container terminal is the handing equipments able to transfer many containers efficiently. Those are maybe automated transfer cranes, automatic guided vehicles and automated quay-side cranes. The word 'automated' means the equipment is operated without drivers and those equipments are able to work without any interruption in working schedule. Through the researches on the conventional transfer cranes, we decided that the structure of conventional transfer cranes is not proper in automated container terminal and it is not possible to handle so many container in limited time. Therefore we have been studying on the proper structure of the automated container for past several years and a new type of transfer cranes has been developed. Design concept and control method of the new crane are introduced and experimental results are presented in this paper.his paper.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1529-1531
• /
• 2008

Since the discovery over a decade ago, carbon nanotubes (CNTs) have been attracting considerable attentions both from scientists and engineers. Because of the excellent field emission properties, such as high aspect ratio, extremely small diameter, and high emission current, CNTs become a potential candidate as field emitter for field emission display (FED) and lighting (FEL) as backlight for LCD. Due to the exceptional physical properties, such as superior thermal and electrical conductivities, as well as high stiffness and strength, the CNT-based composites can be as light-weight heat-sink or thermal spreader materials used for power electronic devices, such as power LED for general illumination. The CNTs for above applications will be reviewed, and related materials and devices will be demonstrated in this paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.2
• /
• pp.158-163
• /
• 2013

In this paper, thermal analysis of heatsink for 30 W class Chip-on-Board (COB) LED light source is performed by using SolidWorks Flow Simulation package. In order to increase the convection heat transfer, number of fin and shape of the heatsink is optimized. Furthermore, a copper spread is applied between the COB LED light source and the heatsink to mitigate the heat concentration on the heatsink. With the copper spread, the junction temperature between the COB LED light source and the heatsink is $50.9^{\circ}C$, which is $5.4^{\circ}C$ lower than the heatsink without the copper spread. Due to the improvement of the junction temperature, the light output is improved by 5.8% when the LED light source is stabilized. The temperature difference between the simulation and measured result of the heatsink with the copper spread is within $2^{\circ}C$, which verifies the validity of the thermal design method using a simulation package.