• 한국환경농학회지
• /
• 제20권5호
• /
• pp.340-345
• /
• 2001

High rates of nitrogen fertilization dangerously increase the nitrate content of vegetable crops, and the accumulation of nitrate in edible crops is undesirable because of potential risks to human health. Micronutrient solution containing Cu, Mn, Mo, Zn was tested for the suppression of nitrate accumulation in lettuce grown in pots treated with Mg fertilizer under a greenhouse condition. The micronutrient solution was sprayed on leaves at 3 and 4 weeks after transplanting of 20-day old seedlings. Plants were harvested after 5-week growth, and yield, contents of chlorophyll, sugar, micronutrient and nitrate, and also nitrate reductase activity were measured. Fresh weight of lettuce was significantly increased by the application of Mg and micronutrients, and the effect was the most significant in the Mg+micronutrient treatment. Also contents of chlorophyll and micronutrients were higher in the plants of micronutrient treatments. Contents of nitrate were reduced by about 14-18% in lettuce with Mg and/or micronutrient applications. Compared to the plants of control treatment, nitrate reductase activity was also higher in those plants treated with micronutrients, and in the treatment of Mg+micronutrients the enzyme activity was six times as high as that of control treatment. Although the effect of mineral nutrients on the suppression of nitrate accumulation in lettuce was relatively small in this study, an appropriate supply of mineral nutrients could be one of the solutions for the nitrate accumulation in vegetables.

• 한국세라믹학회지
• /
• 제50권5호
• /
• pp.326-332
• /
• 2013

In this study, we prepared yttria stabilized zirconia granules for thermal barrier coatings using a spray drying process. First, we characterized the properties of granules such as flow rate and packing density for utilizing the air plasma spray process. The flow rate and packing density data showed 0.732 g/sec and 2.14 $g/cm^3$, respectively, when we used larger and denser particles, which are better than hollow granules or smaller spherical granules. Second, we chose larger, spherical granules fabricated in alcohol solvent as starting powders and sprayed it on the bondcoat/nimonic alloy by an atmospheric plasma spray process varying the process parameters, the feeding rate, gun speed and spray distance. Finally, we evaluated representative thermal and mechanical characteristics. The thermal expansion coefficients of the coatings were $11{\sim}12.7{\times}10^{-6}/^{\circ}C$ and the indentation stress measured was 2.5 GPa at 0.15 of indentation strain.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.197-202
• /
• 2007

Fit of the restoration and its cementation procedure is crucial to both its short and long term prognosis. Marginal fit is affected by many variables during the fabrication process. These variables, being intrinsic properties of the materials or the clinical technique used, can cause changes in the size and shape of the definitive restoration. Even if all variables are controlled carefully, the seating of a restoration can still be affected due to insufficient space for the luting agent. The use of die spacer can reduce the elevation of a cast restoration of a prepared tooth, decreased seating time, improve the outflow of excess cement, and lower the seating forces. The purpose of this study was to evaluate the marginal fidelity according to die spacer application times and measurement site. Casting alloys were prepared and fabricated using non-precious metal at $950^{\circ}C$. Specimens are divided into four groups: I(die spacer painted casting for wax pattern), II(die spacer non painted casting for wax pattern). The specimens were cut and polished for marginal gap observation. The marginal gap was observed using scanning electron microscopy (SEM).

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권2호
• /
• pp.12-15
• /
• 2008

Nano-sized dots have been formed on the buffered metal substrates using the novel approach of the electro-spray deposition, to modulate the substrate surface and induce the columnar defects in REBCO films grown on it. The $BaZrO_3$ precursor solution was synthesized and electro-sprayed out onto the negatively charged substrate surface. Using the electrostatic force, nano-sized dots can be grown and uniformly distributed on the buffered metal substrate. The height of BZO nanodots was observed above the 200nm, which are beneficial to induce the columnar defects onto the BZO as a seed. The density of BZO nanodots was also investigated and ${\sim}7.8/{\mu}m^2$ was obtained. As the deposition distance of electro-spray was shortened there was ${\sim}8times$ increase of density of nanodots. The optimization of process variables in electro-spray deposition are discussed in respect to the superconducting REBCO films processed by the Metal-Organic Deposition with the effective flux pinning properties.

• Journal of the Korean Wood Science and Technology
• /
• 제45권4호
• /
• pp.432-443
• /
• 2017

Maltodextrin and citric acid are two types of natural materials with the potential as an eco-friendly binder. Maltodextrin is a natural substance rich in hydroxyl groups and can form hydrogen bonds with lignoselulosic material, while citric acid is a polycarboxylic acid which can form an ester bond with a hydroxyl group at lignoselulosic material. The combination of maltodextrin and citric acid as a natural binder materials supposed to be increase the ester bonds formed within the particleboard. This research determined to investigate the bonding properties of a new adhesive composed of maltodextrin/citric acid for nipa frond particleboard. Maltodextrin and citric acid were dissolved in distillated water at the ratios of 100/0, 87.5/12.5, 75/25 and 0/100, and the concentration of the solution was adjusted to 50% for maltodextrin and 60% citric acid (wt%). This adhesive solution was sprayed onto the particles at 20% resin content based on the weight of oven dried particles. Particleboards with a size of $25{\times}25{\times}1cm$, a target density $800kg/m^3$ were prepared by hot-pressing at press temperatures of $180^{\circ}C$ or $200^{\circ}C$, a press time of 10 minute and board pressure 3.6 MPa. Physical and mechanical properties of particleboard were tested by a standard method (JIS A 5908). The results showed that added citric acid level in maltodextrin/citric acid composition and hot-pressing temperature had affected to the properties of particleboard. The optimum properties of the board were achieved at a pressing temperature of $180^{\circ}C$ and the addition of only 20% citric acid. The results also indicated that the peak intensity of C=O group increased and OH group decreased with the addition of citric acid and an increase in the pressing temperature, suggesting an interreaction between the hydroxyl groups from the lignocellulosic materials and carboxyl groups from citric acid to form the ester groups.

• 한국환경과학회지
• /
• 제18권5호
• /
• pp.589-594
• /
• 2009

The goals of this study were conducted to investigate the effects of applying liquid aluminum chloride ($AlCl_3$) to rice hulls on pH and soluble reactive P (SRP). A total of 800 broiler chicks (4 treatments $\times$ 4 replicates $\times$ 50 birds) were housed into 16 floor pens in a single house for 5 weeks. The treatments were divided into 4 groups: control, 100 g of liquid $AlCl_3/kg$ of rice hulls, 200 g of liquid $AlCl_3/kg$ of rice hulls, and 300 g of liquid $AlCl_3/kg$ of rice hulls. Liquid $AlCl_3$ was sprayed on the rice hulls surface at a rate of 100 g, 200 g, and 300 g liquid $AlCl_3$ per kg rice hull. pH values and SRP contents were significantly decreased (P<0.05) with the increased liquid $AlCl_3$ levels in comparison with control. However, no significant differences in SRP contents were observed among all treatments at 3 and 4 weeks. Applying 100 g, 200 g, and 300 g liquid $AlCl_3$ to rice hulls reduced SRP contents by 18, 25, and 52% for 5 weeks, respectively, compared with the controls. In conclusion, these results suggest that using liquid $AlCl_3$ on rice hulls should be promising for reducing water contamination and resulted in a reduction in SRP contents, which reduced pH.

• Journal of Ginseng Research
• /
• 제42권2호
• /
• pp.175-182
• /
• 2018

Background: The impact of fungicide azoxystrobin, applied as foliar spray, on the physiological and biochemical indices and ginsenoside contents of ginseng was studied in ginseng (Panax ginseng Mey. cv. "Ermaya") under natural environmental conditions. Different concentrations of 25% azoxystrobin SC (150 g a.i./ha and 225 g a.i./ha) on ginseng plants were sprayed three times, and the changes in physiological and biochemical indices and ginsenoside contents of ginseng leaves were tested. Methods: Physiological and biochemical indices were measured using a spectrophotometer (Shimadzu UV-2450). Every index was determined three times per replication. Extracts of ginsenosides were analyzed by HPLC (Shimadzu LC20-AB) utilizing a GL-Wondasil $C_{18}$ column. Results: Chlorophyll and soluble protein contents were significantly (p = 0.05) increased compared with the control by the application of azoxystrobin. Additionally, activities of superoxide dismutase, catalase, ascorbate peroxidase, peroxidase, and ginsenoside contents in azoxystrobin-treated plants were improved, and malondialdehyde content and $O_2^-$ contents were reduced effectively. Azoxystrobin treatments to ginseng plants at all growth stages suggested that the azoxystrobin-induced delay of senescence was due to an enhanced antioxidant enzyme activity protecting the plants from harmful active oxygen species. When the dose of azoxystrobin was 225 g a.i./ha, the effect was more significant. Conclusion: This work suggested that azoxystrobin played a role in delaying senescence by changing physiological and biochemical indices and improving ginsenoside contents in ginseng leaves.

• Journal of Acupuncture Research
• /
• 제22권6호
• /
• pp.1-15
• /
• 2005

Objectives : The aim of this study was to investigate the effect of Peucedani Radix herbal acupuncture(PR-HA) at St36(joksamni) on ovalbumin-induced asthma in mice. Methods : C57BL/6 mice were sensitized and challenged with OVA(ovalbumin) for 12 weeks(once a week) C57BL/6 mice were injected, inhaled and sprayed with OVA for 12 weeks (3times a week). One of the two experimental groups was just treated with needle-prick on St36 and the other group was treated with 1% concentrations of PR-HAS at St36, for the later 8 weeks (3times /week). Results : 1. The weight and total cells of lung of the mice group treated with PR-HA decreased significantly compared with those of control group. 2. Total Leukocytes and Eosinophils in BALF of the mice group treated with PR-HA decreased significantly compared with those of control group. 3. Eosinophils in BALF of the mice group treated with PR-HA in Photomicrographs decreased significantly compared with those of control group. 4. According to Histological analysis of lung sections, it decreased significantly adhension of collagen in PR-HA than those of control group 5. The concentration of IgE, IL-4, IL-5, in BALF and IL-4, IL-5, Il-13 in serum of the mice group treated with PR-HA decreased significantly compared with that of control group. 6. The number of Gr-1+/CD11b+, CD11b+, CD3-/CCR3+, CD4+, CD3e+/CD69+ , CD23+B220+ cells in the lungs of the mice group treated with PR-HA decreased significantly compared with those of control group. 7. The cytokine's manifestation of mRNA of the mice group treated with PR-HA with RT-PCR decreased significantly compared with that of control group. Conclusion : We conclude that PR-HA is effective on OVA-induced asthma of C57BL/6 mouse.

• 한국산림과학회지
• /
• 제94권4호통권161호
• /
• pp.277-280
• /
• 2005

밤나무재배지 내에 살수장치를 고정 설치하고, 이를 이용하여 일시에 약제를 살포함으로써 밤나무의 중요 종실해충인 복숭아명나방(Dichocrocis punctiferalis)의 피해를 효과적으로 방제할 목적으로 2002년에 경기도 여주군 장천면에서 연구가 수행되었다. 공시약종은 fenitrothion 50% EC 1,000배액 및 diflubenzuron 25% WP 2,500배액을 사용하였으며, 얻어진 결과는 다음과 같다. 복숭아명나방의 2세대 성충우화시기는 7월 상순부터 9월 상순까지 약 60일간이며, 우화최성기는 7월 하순부터 8월 상순의 약 10일간이었다. 살수장치(스프링클러)에 의한 수관약제살포는 관행의 지상약제살포와 비교하여 아주 효율적이었다. Diflubenzuron 25% WP 2,500배의 수관살포는 무처리의 피해율 30.4% 와 비교하여 2.3%(0.9-4.0%)로서 92%(86.7-97.0%)이상의 높은 방제효과가 있었다. 복숭아명나방에 대한 적정약제 살포시기 및 살포횟수는 7월 상순부터 8월 하순까지 10-15일 간격으로 4-5회 살포하는 것이 효과적이었다.

• 한국유기농업학회지
• /
• 제22권2호
• /
• pp.347-357
• /
• 2014

본 연구는 배 개화기에 염소계 살균제인 NaDCC(sodium dichloroisocyanurate)의 사용에 따른 배검은별무늬병의 방제 가능성을 검토하기 위하여 수행하였다. 건전한 배나무에 배검은 별무늬병원균인 Venturia nashicola의 분생포자를 접종하고 NaDCC를 농도별로 살포한 결과, 무처리에서 51.6% 발생한 반면에 NaDCC 처리시 750mg/L에서는 23.8%, 1,000mg/L에서는 26.2%로 발병억제 효과가 있었다. 원황 등 6개 품종을 대상으로 만개기에 NaDCC를 살포하여도 배꽃의 화분발아에는 피해가 없었다. 신고 배 포장에서 개화초기와 만개기로 구분하여 NaDCC를 살포한 결과 개화초기에 NaDCC를 단독 살포 처리시 98% 이상의 높은 수정율을 나타내어 가장 효과적인 살포시기로 판단되었다. 또한 신고 배 재배포장에서 NaDCC를 배검은별무늬병 방제 적기에 4회를 살포한 결과 NaDCC 750mg/L 이상의 농도로 처리시 발병과율은 0%이었다.