• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.66-72
• /
• 2020

The difference of plasma resistance between the CAS glass bulk and coating films were compared. Plasma resistance was confirmed by analyzing the etch rate and the microstructure of the surface when the CAS glass bulk and the glass coating film were etched with CF₄/O₂/Ar plasma gas. CAS glass coating film was etched up to 25 times faster than the glass bulk. A statistically high correlation between the surface roughness and the etching rate of the coating film was derived, and thus, the high surface roughness of the coating film was determined to cause rapid etching. In addition, cristobalite crystals that has a low Ca content and a high Si content, was foamed on the glass coating film. Therefore, the CAS glass coating film is considered to have low plasma resistance compared to the glass bulk.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.267-275
• /
• 2020

Purpose: In this study, GPR exploration equipment, spray vehicles and flow meters, core drill, borehole image processing system(BIPS), 3D cavity imagery equipment, and cavity formatting equipment were used to identify this cavity growth process. Method: A certain amount of water was injected in proportion to the mass of the cavity, and the cavity was observed to expand as the injected water was drained out. The cavity rating change was evaluated by quantitatively evaluating the expansion factors and the speed of growth. Results: According to the results of examining the volume change through injection time - injection flow rate - volume increase for the four experimenters, the volume increase decreased as the injection time increased, and there was no further increase in volume if injected for one hour or so. Conclusion: In addition, the injection test analyzed the volumetric variation to determine whether the cause of the cavity occurrence was the effect of the underground burial in the vicinity of the cavity. Therefore, it was found that the cavity expansion is caused by the repetition of the relaxation soil collapse due to the groundwater flow and the loss of the collapsed soil below the cavity.

• Journal of Animal Environmental Science
• /
• v.13 no.2
• /
• pp.105-112
• /
• 2007

This research was carried out to test and analyse the capability of a fan for development of a sprayer in actual livestock farm. A fan was designed and made to be able to spray agricultural chemicals within 140mm in a maximum scattering range and 100m in an effective scattering range. Accordingly, its' flow rate was $3,600\;m^3/min$, and static pressure was 100 mmAq for a wide area sprayer to be sprayed widely and far. Fan performance, which was given $600\;m^3/min$ flow rate and 500 mmAq total pressure, was tested fur basic experiment. As the result, the axial power showed minimum error, which be designed to keep the fan performance. And power efficiency was the maximum. Sound level was 92.1dB that wasn't enough to environmental standard. If we take the sealed place into consideration, sound level is suitable for environmental standard.

• Archives of Plastic Surgery
• /
• v.35 no.3
• /
• pp.267-272
• /
• 2008

Purpose: Donor site seroma is the most common complication of extended latissimus dorsi flap for breast reconstruction. One of preventive treatments is to use the fibrin sealant in donor site before closure. Experimentally, it has been used successfully in the prevention of latissimus donor site seroma, but its clinical efficacy and results were very controversial. Thus, the purpose of this study is to evaluate the clinical efficacy and to determine the optimal dose of fibrin sealant. Methods: A retrospective study was done of patients operated under same surgical conditions by one operator with variable doses of fibrin sealant. The study group consisted of 60 consecutive patients who underwent breast reconstruction with extended latissimus flap reconstructions from January 2005 to December 2006. Patients were divided into 4 group by applied fibrin sealant amount(group 1=0 mL, group 2=1 mL, group 3=2 mL, group 4=4 mL). Retrospective data were obtained from total postoperative drainage amount, time from surgery to drain removal, and incidence and quantity of seroma formation in matched patients group. Results: Total drainage amount decreased relative to the amount of fibrin sealant. The seroma formation rate of 30% in the study group 4 was significantly less than group 1 rate of 71%(p<0.05). It was an improvement over the rates of as much as 79% described previously in the literature. Also, time from surgery to drain removal was shortened significantly in group 4 patients(p<0.05). Conclusion: The use of fibrin sealant in the extended latissimus dorsi flap donor site appears effective in preventing seroma. However, important factors to obtain lower seroma formation rates are proper techniques and proper amounts such as the authors suggested amount: $0.01mL/cm^2$ with spray type fibrin sealant.

• Development and Reproduction
• /
• v.15 no.2
• /
• pp.133-141
• /
• 2011

The marine ornamental industry has become a multi-billion dollar industry these days. As developing, however, this industry has been criticized for the indiscriminate captures and the destruction of the surrounding environment. To circumvent these problems, it is suggested to breed the organisms artificially. While clownfishes Amphiprion sp. and Premnas sp. are the most famous ornamental organisms in the trade, few studies are yet available on the culture and commercial production of these fishes. These studies were performed to investigate the spawning periodicity, behavior and the habits during egg incubation, and to provide the information on the mass hatching system. The spawning periodicity and frequency were different in 4 pairs under the constant condition, temperature, salinity and photoperiod. On the contrary, the male's behaviors for egg incubation are almost same in the all. The egg-fanning activity of the male increased as the developing eggs reaching to the hatching day. Based on the above results, we designed a new artificial hatching system, the rotating type (RT), and compared it with the aeration type (AT) and spray type (ST) that were previously described. RT showed higher hatching rate of 87.3% than AT (74.4%) and ST (60.5%). Also, there were no significant differences in the hatching rate regardless of the number (2, 3, 5) of hatching plates. We suggest RT may accommodate various number of hatching plates and constitute a better hatching system for clownfishes.

• Horticultural Science & Technology
• /
• v.32 no.2
• /
• pp.193-201
• /
• 2014

We investigated the effect of preharvest spray of aminoethoxyvinylglycine (AVG) on the fruit quality and incidence of physiological disorders during shelf-life of 'Hanareum' and 'Wonhwang' pear (Pyrus pyrifolia Nakai). AVG applications (0, 75, 150 and $300mg{\cdot}L^{-1}$) made 30 days before anticipated harvest of respective cultivar. AVG did not influence the fruit development and quality parameters including starch content, soluble solids and acidity at harvest time in two pear cultivars although the flesh firmness of the fruits treated with $300mg{\cdot}L^{-1}$ AVG were higher than that of control in 'Hanareum' pear. Among the three AVG concentrations, only $300mg{\cdot}L^{-1}$ AVG showed effectiveness on maintaining flesh firmness in 'Hanareum' pear during shelf-life. Meanwhile, competitive high flesh firmness was attained in 'Wonhwang' pear treated with $150mg{\cdot}L^{-1}$ AVG (27.7 N) and $300mg{\cdot}L^{-1}$ AVG (28.2 N) when compared with untreated control (17.8 N) during 21 days of shelf-life at $25^{\circ}C$. AVG did not cause any significant difference at skin color development relative to control in two pear cultivars. AVG decreased ethylene production and respiration rate at $300mg{\cdot}L^{-1}$ level in two pear cultivars during the entire shelf-life. During shelf-life, low incidence of physiological disorders including internal and core browning and mealiness were attained in the fruits treated at $300mg{\cdot}L^{-1}$ AVG in two cultivars when we compared with the untreated control.

• Asian Journal of Turfgrass Science
• /
• v.26 no.1
• /
• pp.35-43
• /
• 2012

These studies were carried out to ascertain the effects of paraffin oil on prolongation of the green leaf color period in Zoysiagrass. Fifty-fold diluted 98% paraffin oil treatment obtained the lowest reduction rate of green color. In early October we sprayed 50-fold, 100-fold and 200-fold diluted 98% paraffin oil in a Zoysia japonica field in Hapcheon of Gyeongnam and Sangju of Gyeongbuk and in a Z. matrella field in Gumjung of Busan and Anseong of Gyeonggii. Leaf color maintained for 60 days after treatment in Zoysia japonica. Leaf color remained for 60 days after treatment in Anseong, Hapcheon and Sangju when treated in the mid-October. Chlorophyll content was higher in paraffin oil treatment areas than in control areas in early October. Weight reduction rate was lower in the paraffin oil treated than in untreated leaves of Zoysiagrass when sprayed in Gumjung and Anseong in early October and mid-October, respectively. The chlorophyll content in leaves of Z. japonica was increased by increasing the spray volume of paraffin oil in the same dose treated in Lexington, Kentucky, USA. Paraffin oil can be used to prolongate of Zoysiagrass leaf color.

• The Korean Journal of Pesticide Science
• /
• v.11 no.2
• /
• pp.87-94
• /
• 2007

Pyrethroid insecticide have widely been used for agricultural sector and residential environments. To assess the exposure of insecticide which is absorbed through skin the analysis of urinary metabolite is essential. At present, the urinary 3-PBA was analyzed using liquid-phase extraction. But LPE have many limitations, such as long pre-treatment time and low recovery. So, this study was conducted to determine the optimum conditions for analysing 3-PBA in urine using solid phase extraction. Furthermore, this study intend to investigate the relation of concentrations of pyrethroid, deltamethrin in air and 3-PBA in urine. The optimum condition for hydrolysis was found to be done with hydrochloric acid for one hour. The recovery rates of 3-PBA were $84.6%{\pm}1.2%$, $54.8{\pm}0.9%$, $99.8{\pm}1.2%$ with XAD-2, XAD-7, XAD-16 using as the aborbents and acetone as eluents respectively. But acetonitrle and methanol gave low recovery rate and methyl cellosolve could not elute the compound. The amount of acetone for elution were 6mL, 9mL, 3mL for XAD-2, XAD-7, XAD-16 as absorbents respectively. The non-absorbed rates was $0.8{\pm}0.5%$, and $0.7{\pm}0.3%$ under XAD-16, mesh size 140-200, amount of resin 1.4g and the flow rate of eluent was 0.1mL/min. In the concentration process, we obtained 11 times higher concentration of material. The amounts of urinary 3-PBA were. The LODs of 3-PBA and deltamethrin were 0.004 mg/L, 0.038 mg/L, respectively. The further research of minute monitoring which include spray pattern, environmental condition is needed And more research about the relation between total pyrethroid exposure and urinary various metabolite are also necessary.

• The Journal of the Society of Stroke on Korean Medicine
• /
• v.20 no.1
• /
• pp.65-74
• /
• 2019

■ Objectives The purpose of this case study is to report the effectiveness of Korean medicine and pharmacopuncture in the treatment of pressure ulcer. ■ Methods The patient with pressure ulcer was treated with herbal medicine, Hwangryunhaedoktang pharmacopuncture, acu-moxi treatment. We started herbal medicine mainly Taklisodok-um for pressure ulcer, but changed to Paljung-san due to urinary tract infection on Day 67. During the daily dressing, we inject pharmacopuncture solution subcutaneous ulcer area and spray solution on the cavity of right pressure ulcer. The severity of pressure ulcer was assessed using[NPUAP] pressure ulcer stage, healing rate of pressure ulcer and depth of right side ulcer cavity on Day1, Day15, Day40, Day73, Day95. ■ Results After treatment, the total size of the pressure ulcer was reduced from 90(10*9) to 56(8*7)cm², healing rate of pressure ulcer increased to 37.8%, depth of pressure ulcer was reduced from 3.5 to 2cm. Though NPUAP stage(Gr 4) was not changed, size and color of pressure ulcer definitely improved compared to Day1. ■ Conclusion This study suggested taht Korean medical treatment could be effective option for treating grade 4 pressure ulcer.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.502-510
• /
• 2021

The objective of this study was to develop a novel ticagrelor-loaded self-nanoemulsifying drug delivery system with an enhanced solubility and dissolution rate. Numerous oils and surfactants were screened, then medium chain triglyceride (MCT) oil and the surfactants polyoxyethylene sorbitan monooleate (Tween 80) and Labrafil M1944CS were selected for the preparation of the ticagrelor-loaded self-nanoemulsifying drug delivery system. A pseudo-ternary phase diagram was constructed to detect the nanoemulsion region. Of the various formulations tested, the liquid SNEDDS, composed of MCT (oil), Tween 80 (surfactant), and Labrafil M1944CS (cosurfactant) at a weight ratio of 20/70/10 produced the smallest emulsion droplet size (around 20.56±0.70 nm). Then, particle size, polydispersity, and zeta potential were measured using drugs containing liquid SNEDDS. The selected ticagrelor-loaded liquid SNEDDS was spray-dried to convert it into a ticagrelor-loaded solid SNEDDS with a suitable inert carrier, such as silicon dioxide, calcium silicate, or magnesium aluminometasilicate. The solid SNEDDS was characterized by scanning electron microscopy, transmission electron microscopy, and in vitro dissolution studies. SEM, PXRD, and DSC results suggested that amorphous ticagrelor was present in the solid SNEDDS. Also, the solid SNEDDS significantly increased the dissolution rate of ticagrelor. In particular, the emulsion particle size and the polydispersity index of the solid SNEDDS using silicon dioxide (SS1) as a carrier was the smallest among the evaluated solid SNEDDS, and the flowability and compressibility result of the SS1 was the most suitable for the manufacturing of solid dosage forms. Therefore, solid SNEDDS using silicon dioxide (SS1) could be a potential nano-sized drug delivery system for the poorly water-soluble drug ticagrelor.