• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3208-3212
• /
• 2012

Controlled drug delivery systems employing microparticles offer lots of advantages over conventional drug dosage formulations. Microencapsulation technique have been conducted with biodegradable polymers such as poly(lactic-co-glycolic acid) (PLGA) and poly(lactic acid) (PLA) for its adjustable biodegradability and biocompatibility. In this study, we evaluated two techniques, oil-in-water (o/w) emulsion solvent evaporation and spray drying, for preparation of polymeric microparticles encapsulating a newly synthesized drug, SS-AG20, for the long-term drug delivery of this low-molecular-weight drug with a very short half-life. Drug-loaded microparticles prepared by the solvent evaporation method showed a smoother morphology; however, relatively poor encapsulation efficiency and drastic initial burst were discovered as drawbacks. Spray-dried drug-loaded microparticles had an imperfect surface with pores and distorted portions so that its initial burst was critical (70.05-87.16%) when the preparation was carried out with a 5% polymeric solution. By increasing the concentration of the polymer, the morphology was refined and undesirable initial burst was circumvented (burst was reduced to 35.93-74.85%) while retaining high encapsulation efficiency. Moreover, by encapsulating the drug with various biodegradable polymers using the spray drying method, gradual and sustained drug release, for up to 2 weeks, was achieved.

• 한국가금학회지
• /
• 제24권2호
• /
• pp.59-66
• /
• 1997

Optimum drying conditions to utilize porcine blood from slaughter house for blood meals, and the effects of blood meals on growth in broiler chicks were investigated. Moisture and protein con-tents of slaughter porcine blood were 79.8 and 16.4%, respectively. The protein contents of the flash dried blood meals at 80˚C were not different from those of the spray dried blood meals at 160 and 190˚C, but higher by 17% relative to those of the spray dried blood meals at 80 and 120˚C. Results from protein analysis by SDS-polyacrylamide electrophoresis showed that flash dried blood meals at 80˚C and spray dried blood meals at 160˚C were better than spray dried blood meals at 80, 120 and 190˚C in terms of protein quality. In Feeding Trial I with broiler chicks, body weights of chicks fed 2, 4 and 6% flash dried blood meal diets at 80˚C were increased at 35 days by 5.6, 7.9 and 4.0%, respectively, compared to control group(P<0.05). In Feeding Trial II, body weights of chicks fed 4 and 6% flash dried blood meal diets at 80˚C were increased at 42 days by 4.9 and 5.3%, respectively, compared to control group(P<0.05). Feed conversion ratios of chicks fed diets 4 and 6% flash dried blood meal diets at 80˚C were significantly improved at 42 days by 7.0 and 3.7%, respectively, compared to that of control group(P<0.05). The optimum drying condition of slaughter porcine blood seemed to be the flash drying method at 80˚C

• 한국식품과학회지
• /
• 제31권6호
• /
• pp.1589-1595
• /
• 1999

생강 추출액의 저장안정성을 제공하기 위하여 적정농축 및 건조방법을 선정코자 감압증류 및 RO(역삼투압)에 의한 농축과 냉동 및 분무건조방법별로 분말화한 다음 관능특성을 비롯한 이화학적인 품질특성을 비교하여 보았다. 농축 및 건조방법별 분말제품을 제조한 결과 갈변도는 감압증류법이 RO보다. 분무건조가 냉동건조보다 갈변이 덜 진행된 상태인 반면에 당 함량이나 유리아미노산은 농축방법의 영향을 인식할 수 없었으나 건조방법에 있어서는 냉동건조시 대체로 이들 성분의 손실율을 적게할 수 있었다. 효소적 액화추출액 분말은 생강 추출액 분말보다 단백질과 조회분함량이 낮은 반면 조지방 함량은 약간 높게 나타났으며, 농축 및 건조 중 갈변도와 유리 아미노산의 변화율을 생강 추출액 분말보다 억제하면서 용해도를 증가시킬 수 있는 효과가 있었다. 또한 생강분말에 대한 기호도 검사결과, 농축방법에서는 생강 추출액 및 효소적 액화추출액에서 RO농축한 제품이 우수한 결과를 보였으며 건조방법에서는 냉동건조가 우수한 결과를 나타내었다. 특히 효소적 액화 추출액의 경우에는 RO농축한 후 냉동건조하면 종합 기호도에 있어서 생강추출액 분말에 대한 기호도 특성과 거의 차이가 없는 것으로 나타났다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.393-394
• /
• 2000

The magnetic alloy of $Nd_{2}Fe_{14}B$-type was synthesized by a mechano-chemical method, including the processes of spray-drying, de-binding, milling, $H_{2}$- and Ca-reduction and washing. The very fine $Nd_{2}Fe_{14}B$ particles smaller than $1\mu\textrm{m}$ could be achieved without the inevitable pulverization step in conventional processes.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1997년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
• /
• pp.28-28
• /
• 1997

• 한국분말재료학회지
• /
• 제10권4호
• /
• pp.228-234
• /
• 2003

In the present study, the focus is on the synthesis of titanium carbide/cobalt composite powder by the spray thermal conversion process using metallic salt solution as the raw materials. Two types of oxide powders of Ti-Co-O system were prepared by the spray drying of two types of metallic salt solutions : titanium chloride-cobalt nitrate and $TiO_2$ powder-cobalt nitrate solutions. These oxide powders were mixed with carbon black, and then these mixtures were carbothermal reduced under a flowing argon atmosphere. The changes in the phase structure and thermal gravity of the mixtures during carbothermal reduction were analysed using XRD and TG-DTA. In the case of using the titanium chloride-cobalt nitrate solution, it could not be obtained TiC/Co composite powder due to contamination of the impurities during the spray drying of the solution. However, in tile case of using the $TiO_2$ powder-cobalt nitrate scullion, TiC-15 wt. %Co composite powder could be synthesized by the spray thermal conversion process. The synthesized TiC-15 wt. %Co composite powder at 120$0^{\circ}C$ for 2 hours has average particle size of 150 nm.

• 한국식품조리과학회지
• /
• 제27권1호
• /
• pp.75-84
• /
• 2011

The aim of this study was to develop a convenient brown sauce product with long shelf life that has similar taste and quality characteristics with sauce used in restaurants. Response surface analysis was carried out to optimize brown sauce. Extracted brown sauce powder was subjected to hot air drying, infrared drying, freeze drying, and spray drying to determine the appropriate drying method for brown sauce manufacturing. The optimum extraction conditions were set by superimposing and reading each reaction surface that satisfied all of the sensory characteristics such as color, smell, taste, concentration, and overall preference level in order to set the optimum conditions for brown sauce production. The optimum extraction conditions for brown sauce were determined to be heating time 30 min, gelatin addition quantity 9.00%, and tomato paste addition quantity 11.25%. Reliability test showed a similar value to the predicted scope when compared to the experimental value obtained under the same conditions as the predicted value according to RSM (response surface methodology), enabling verification of the derived regression formula. Product powder of ideal brown sauce by heating, infrared radiation, freezing, and spray drying and investigate result for functional tests of color, flavor, taste, viscosity, overall acceptability and show highly acceptability on powder by infrared rays and freeze-drying methods. Especially, infrared radiation method resulted in favorable color and flavor values while freeze-drying method produced good taste and viscosity values and high overall acceptability. Therefore, infrared radiation drying method and freeze-drying method to product powder.

• 한국수산과학회지
• /
• 제38권1호
• /
• pp.65-69
• /
• 2005

We have developed a new method of manufacturing salts by horizontal spray drying technique, using the concentrated deep ocean water after desalination processes. We studied the chemical characteristics of the spray-dried salts. Sodium content in the spray salts is $28.4\%$, which is $10-30\%$ lower than that of bay salts, bamboo salts and boiling salts $(32-38.2\%)$. However, the contents of magnesium, potassium and calcium of the spray salts are 2.5 times, 3 times and 4.5 times higher relative to those of bay salts, respectively. On the one hand, sulfur content in spray salts is 14 times lower than those of bay salts, which is caused by their volatilization during spray and vaporization of the concentrated seawater. Enrichment factors of Mg (0.8), K (0.9) and Ca (1.0) in the spray salts are relatively higher than those in bay salt (0.2-0.3), bamboo salt (0.15-0.4) and boiled salt (0.4-0.7), respectively. On the contrary, enrichment factor of sulfur in spray salts is observed to be 0.07, which is considerably lower than those in other salts (0.3-0.7). It means that the minerals like Mg, K and Ca can be well conserved from seawater to salts through spray drying techniques, while volatile elements like sulfur, lead, mercury and organic compounds can be easily removed from seawater via spray and heating processes.

• 한국식품과학회지
• /
• 제41권6호
• /
• pp.657-661
• /
• 2009

해조칼슘을 습식분쇄한 초미세액상칼슘을 분무건조하여 부형제 종류에 따른 분말칼슘의 품질특성을 알아보고자 gum arabic, cyclodextrin, Na-caseinate를 첨가하여 품질특성을 비교하였다. 분무건조한 초미세분말칼슘의 수분함량은 2% 내외의 안정한 분말을 얻을 수 있었고, 색도는 원료인 해조칼슘보다 L값은 높았으며, b값은 감소하는 것으로 나타났다. 입자크기는 당류의 부형제 첨가로 초미세 크기로 분쇄되는 것을 확인할 수 있었으며, gum arabic을 첨가하여 제조한 초미세액상칼슘을 분무건조한 분말이 식초와 pH에 대한 용해도에서 가장 우수한 것으로 나타났다. 칼슘함량은 해조칼슘분말이 28%의 칼슘함량을 나타내었고, 부형제를 달리하여 제조한 초미세액상칼슘을 분무건조한 분말은 27% 내외로 비슷한 칼슘함량을 나타내어, 습식분쇄나 분무건조 공정에서 칼슘의 손실은 없는 것으로 나타났다. 흡습에 대한 안정성실험에서는 해조칼슘분말이 흡습에 안정하였으며, gum arabic을 첨가하여 분무건조한 분말이 흡습이 많이 발생하였다. 전자주사 현미경 관찰을 통하여 습식분쇄로 입자크기가 작아지는 것을 확인할 수 있었고, gum arabic을 사용하여 얻은 초미세칼슘분말이 단백질계나 사용하지 않았을 때보다 더 균일한 입자분포를 보였다. 따라서 습식분쇄한 초미세액상칼슘을 분말화하여 용해성등 품질특성이 개선됨을 확인하였으며 습식분쇄기술과 분무건조법을 식품가공기술로 활용할 수 있는 가능성을 확보하였다.

• 한국축산식품학회지
• /
• 제40권1호
• /
• pp.118-131
• /
• 2020

It is necessary to add protective agents for protecting the probiotic viability in the preparation process of probiotics starter. In this study, we used whey protein concentrate (WPC), pullulan, trehalose, and sodium glutamate as the protective agent and optimized the proportion of protective agent and spray-drying parameters to achieve the best protective effect on Lactobacillus plantarum. Moreover, the viable counts of L. plantarum in starter stored at different temperatures (-20℃, 4℃, and 25℃) for 360 days were determined. According to response surface method (RSM), the optimal proportion of protective agent was 24.6 g/L WPC, 18.8 g/L pullulan, 16.7 g/L trehalose and 39.3 g/L sodium glutamate. The optimum spray-drying parameters were the ratio of bacteria to protective agents 3:1 (v: v), the feed flow rate 240 mL/h, and the inlet air temperature 115℃ through orthogonal test. Based on the above results, the viable counts of L. plantarum was 12.22±0.27 Log CFU/g and the survival rate arrived at 85.12%. The viable counts of L. plantarum stored at -20℃ was more than 10¹⁰ CFU/g after 200 days.