• Food Science and Biotechnology
• /
• v.15 no.4
• /
• pp.506-510
• /
• 2006

To be used as a source of astaxanthin by animals, the red yeast Xanthophyllomyces dendrorhous needs to be dried and the cell wall ruptured. Spray-drying and flat-roller milling successfully prepared the yeast as a feed additive with little loss of astaxanthin. Spray-drying successfully dried the yeast with negligible decomposition of astaxanthin compared to drum-drying. By repeated milling with a flat-roller mill, astaxanthin extracted with ethanol increased from 0.01 to 1.31 mg astaxanthin/g yeast. This method did not decompose astaxanthin in contrast to chemical digestion of the cell wall. Flat-roller milling effectively flattened and cracked the dried cells. Astaxanthin in yeast prepared by spray-drying and flat-roller milling was well absorbed by animals. Specifically, when spray-dried and milled yeast was supplied in the feed (40 mg astaxanthin/kg feed), astaxanthin was successfully absorbed (1,500 ng/mL blood and 1,100 ng/g skin) by laying hens.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2001.04a
• /
• pp.33-33
• /
• 2001

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.132-139
• /
• 2000

This study was conducted to optimize the emulsion process and the spray drying process for the microencapsulation of flavor compounds. Using the wall system selected, emulsion process for microencapsulation was optimized on the change of the pressure of piston-type homogenizer. Emulsification pressure of 34.5 MPa was found to be the most suitable for preparing flavor emulsion. Effects of drying temperature and atomizer speed of the spray drier on total oil, surface oil, and flavor release of the flavor powder were investigated using response surface methodology. The optimum spray drying conditions for minimal surface oil and flavor release and maximum total oil were $170{\circ}C$ inlet temperature and 15,000 rpm atomizer speed. The spray-dried powder processed with the highest drying temperature showed spherically-shaped particles with smooth surface.

• Journal of the Korean Chemical Society
• /
• v.64 no.5
• /
• pp.259-266
• /
• 2020

The main purpose of this study is to examine the different physicochemical properties of spray-dried products. The carrier agents and powders after the spray-drying process were analyzed for encapsulation yield, moisture content, color parameters, total polyphenol content (TPC), antioxidant capacity (AC), bulk density, flowability, wettability, hygroscopicity, water solubility index (WSI), particle size and microstructure. The spray-drying process was carried out with different carrier agents including maltodextrin (MD) and the combination of maltodextrin and gum arabic (MD-GA) with MA/GA ratio of 70/30, dried at the inlet/outlet air temperature of 160 ℃/70 ℃, 4 bar, airflow rate of 70 ㎥·h^-1 and feed flow rate of 750 mL·h^-1. The results showed that the different carrier agents have significant influences on the physicochemical properties of the powder produced by the spray-drying method. In there, while the values of recovery efficiency and flowability of spray-dried products from MD are higher than those of spray-dried products from MD-GA combination, the opposite is true for the values of TPC, AC, bulk density and wettability, whereas hygroscopicity and WSI values are equally represented in both products.

• KSBB Journal
• /
• v.26 no.1
• /
• pp.49-56
• /
• 2011

Volatile components of crude fucoidan and its raw material, Undaria pinnatifida sporophylls were identified by GC/MSD analysis, and the effects of a combined method of solvent extraction and drying (hot-air drying or spray drying) on deordorization of fucoidans were examined. The major components of seaweed smell (odor) in crude fucoidan and Undaria pinnatifida sporophylls were identified as alkanes (octadecane, heptadecane, tetradecane) and acids (hexadecanoic acid, oleic acid). Solvent extraction and drying were combined for the deordorization of fucoidans: hot-air drying/deordorization process (HDDP) and spray drying/deordorization process (SDDP). The deordorization effects of solvent extraction using solvents including water, ethanol, and acetone were investigated. Among the tested solvents, ethanol was selected as a deordorization solvent, because the seaweed smell and taste were mostly lowered by ethanol extraction followed by drying. In addition, HDDP and SDDP were compared, showing that SDDP gave higher sensory characteristics than HDDP. When the crude fucoidan was treated by ethanol extraction for 30 min followed by SDDP, approximately 60% of off-flavor components of crude fucoidan was removed based on GC/MSD peak area, and the total sugar and sulfate contents and APTT-anticoagulant activity significantly increased compared to crude fucoidan. In conclusion, SDDP after ethanol treatment was proposed and established as a deordorization process for fucoidan preparation.

• Journal of Pharmaceutical Investigation
• /
• v.16 no.2
• /
• pp.55-67
• /
• 1986

Inclusion complexation of tiaprofenic acid (TPA) with cyclodextrins $({\alpha}-,\;{\beta}-,\;{\gamma}-CyDs)$ in aqueous solution and in solid phase was investigated by solubility method, measurement of partition coefficient, ultra-violet, circular dichroism, infrared spectroscopies, powder X-ray diffractometry and differential scanning calorimetry. Investigations were made to prepare inclusion complexes of TPA with ${\beta}-CyD$ in solid powdered form by coprecipitation, freeze-drying, spray-drying and co-pulverization methods. The coprecipitation, freeze-drying and spray-drying methods were successful in obtaining inclusion complexes. The results showed that the latter two methods might be originally superior to the former in obtaining powdered inclusion completes. Especially, it was shown by powder X-ray diffractometry that spray-dried ${\beta}-CyD$ alone, TPA-spray-dried ${\beta}-CyD$ physical mixture, and spray-dried $TPA-{\beta}-CyD$ complex were amorphous. The dissolution behaviours of $TPA-{\beta}-CyD$ systems prepared by above four methods were compared with those of TPA alone and $TPA-{\beta}-CyD$ physical mixture, and the rates of dissolution of TPA in pH 1.2 buffer were greatly enhanced by inclusion complexation and copulverization.

• The Korean Journal of Food And Nutrition
• /
• v.13 no.2
• /
• pp.152-157
• /
• 2000

In order to select the optimum drying method for the production of cinnamon extract, water extract and 70% ethanol extract of cinnamon were prepared. And then several drying method of oven drying, vacuum evaporation, spray drying and freeze drying were performed. Content of cinnamic acid, cinnamic aldehyde, eugenol, tannin and free sugar, and antioxidant activity, degree of browning, pH, color value, turbity and solubility were compared. In water extract, contents of cinnamic acid, cinnamic aldehyde, eugenol were 29.45mg/100g, 94.86mg/100g, 120.75mg/100g and decreased to 4.76%∼44.21%, 5.30%∼48.05%, 3.66%∼21.83% by oven dyring, vaccum drying, spray drying respectively, but freeze drying showed a little decrease of those components. In 70% ethanol extract, effectual components decreased to 76.05%∼88.38% and 26.86%∼78.76% by freeze drying and vacuum evaporation respectively. Antioxidant activity decreased by drying and decreasing rate in 70% ethanol extract was lower than water extract. Degree of browning increased as the drying temperature increased. Tannin and free sugars were little affected by drying temperature. Solubility decreased in oven drying and 70% ethanol extract. Overall data suggested that optimum drying methods of cinnamon extract were freeze drying in case of water extract and freeze drying and vaccum drying in case of 70% ethanol extract.

• Journal of the Korean Ceramic Society
• /
• v.50 no.5
• /
• pp.326-332
• /
• 2013

In this study, we prepared yttria stabilized zirconia granules for thermal barrier coatings using a spray drying process. First, we characterized the properties of granules such as flow rate and packing density for utilizing the air plasma spray process. The flow rate and packing density data showed 0.732 g/sec and 2.14 $g/cm^3$, respectively, when we used larger and denser particles, which are better than hollow granules or smaller spherical granules. Second, we chose larger, spherical granules fabricated in alcohol solvent as starting powders and sprayed it on the bondcoat/nimonic alloy by an atmospheric plasma spray process varying the process parameters, the feeding rate, gun speed and spray distance. Finally, we evaluated representative thermal and mechanical characteristics. The thermal expansion coefficients of the coatings were $11{\sim}12.7{\times}10^{-6}/^{\circ}C$ and the indentation stress measured was 2.5 GPa at 0.15 of indentation strain.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.353-357
• /
• 2009

Spray drying is an effective and stable process, which has been widely used to produce pharmaceutical powders. In the traditional spray drying process, it was not quite easy to control the aggregation and the size of particles. Particularly, the preparation of polymeric particles was relatively hard compared to the preparation of food and pharmaceutical ingredients, typically organic materials of small molecular weights. In this study, modification of a conventional spray dryer was tried to use electrical charge and co-axial nozzles to prepare polymeric particles. Poly(ethylene glycol) and poly (D,L-lactide-co-glycolide) were used as the inner polymeric materials, and lactose as the outer shell materials. The results showed that electrohydrodynamic spray-dried particles had a relatively uniform size and particle morphology, and the aggregation of particles could be suppressed compared to the conventional spray-dried particles. The electrohydrodynamic spray-dried powders consisted of spherical particles of $2{\sim}5{\mu}m$ diameters.

• Journal of Powder Materials
• /
• v.20 no.5
• /
• pp.359-365
• /
• 2013

In this study, we fabricated $Nd_2Fe_{14}B$ hard magnetic powders with various sizes via spray drying combined with reduction-diffusion process. Spray drying is widely used to produce nearly spherical particles that are relatively homogeneous. Thus, the precursor particles were prepared by spray drying using the aqueous solution containing Nd salts, Fe salts and boric acid with the target stoichiometric composition of $Nd_2Fe_{14}B$. The mean particle sizes of the spray-dried powders are in the range from one to seven micrometer, which are adjusted by controlling the concentrations of precursor solutions. After debinding the as-prepared precursor particles, ball milling was also conducted to control the particle sizes of Nd-Fe-B oxide powders. The resulting particles with different sizes were subjected to subsequent treatments including hydrogen reduction, Ca reduction and washing for CaO removal. The size effect of Nd-Fe-B oxide particles on the formation of $Nd_2Fe_{14}B$ phase and magnetic properties was investigated.