• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.101-104
• /
• 2002

The beam splitter is important in optical communication systems. in this work, thc quasi-state based on four-mode interference in thc MMI coupler is proposed, and so, device length is shorten to be 1/5 of general designed length. We designed thc polarization splitter based on thc concept of quasi-state. Thc analysis has been accomplished by thc effective index method(EIM) and thc mode propagation analysis(MPA) for given structure.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.7
• /
• pp.503-509
• /
• 2015

Based on ISO 7235, an experimental setup to measure the acoustic performance of splitter type dissipative silencers was fabricated. The length of each duct, sound source, microphone locations, modal filter, and anechoic termination were considered in the design of this setup. The modal filter is a particularly important factor because it affects the limit of measurement. The effects of number of splitters, absorptive material density, perforate plate, and media on the noise reduction of the sample silencers were experimentally investigated. The experimental results show that the insertion loss of a silencer with media, high perforate opening, and higher number of splitters increases especially at higher frequencies.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.122-128
• /
• 2006

This study focuses on a performance improvement of the vent silencer using acoustic analysis. Since the vent silencer is generally used for a high level shock noise, it should be designed to reduce a wide frequency band noise. In the designing stage of the vent silencer, structural shapes of diffuser and splitter are the most significant design parameters. Effects of modifying the original structure of the diffuser and the splitter are analyzed and evaluated. From the results, It is found that the diffuser with two pipes and double-step structure more effectively reduces a wide frequency band noise but the increment of the number of splitters is not desirable.

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.265-266
• /
• 2008

The environmental and mechanical reliability of planar lightwave circuit (PLC)-type optical splitter modules is investigated with references [1, 3]. The module is composed of Y-branching silica-based waveguides on Si connected to optical fiber with UV-curable adhesives and is packaged in a metal case which is filled with humidity-resistant resin. High optical performance such as low loss, low reflection, and thermal stability are obtained through the use of this fiber connection technique. Ten reliability tests including long-term environmental and mechanical and ALT test were carried out for more then ten $1{\times}32$ channel PLC splitter modules.

• IE interfaces
• /
• v.12 no.2
• /
• pp.174-179
• /
• 1999

This paper describes the development of low cost, miniaturized multi-function image splitter for an unmanned guard system. The essential equipments of an image splitter system consist of a video system which displays in one screen images inputted by several cameras, a frame switcher which records each image sequentially in VTR, and TBC(Time Base Control) system which prevents image flickering during image switching. Currently, the price of similar system on the market is high, system management and repair are difficult, and bulky space is required. Futhermore, since currently available frame switcher can record only 30frame/sec, if eight cameras are installed, each camera image is recorded at the low speed of 3.75frame/sec, and consequently skip some images which may be vital for legal evidence. In this research, we have solved the problem of low speed recording by recording the video screen of splitted images at 30frame/sec and zooming each image when play back.

• Design & Manufacturing
• /
• v.15 no.2
• /
• pp.56-62
• /
• 2021

In this study, design technology of a non-mechanical flow meter using fluidic oscillation generated during the fluid flow in the chamber was investigated. To with respect to design a splitter, which is the most important factor in fluid oscillation, a transient flow simulation analysis was performed for three types of shapes and changes in inlet flow velocity. The oscillation characteristics with respect to the time in each case were compared, and it was confirmed that the SM03 model was the best among the presented models. In addition, the FFT analysis of the fluid oscillation results for the SM03 model was used to obtain a linear correlation between the flow velocity change and the maximum frequency, and a frequency of 20.957 (Hz/m/s) per unit flow velocity was obtained. Finally, injection molding simulation and molding experiment of the chamber with the designed splitter were performed.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.453-459
• /
• 2015

Split-flow thin cell fractionation (SPLITT fractionation, SF) is a particle separation technique that allows continuous (and thus a preparative scale) separation into two subpopulations based on the particle size or the density. In SF, there are two basic performance parameters. One is the throughput (TP), which was defined as the amount of sample that can be processed in a unit time period. Another is the fractionation efficiency (FE), which was defined as the number % of particles that have the size predicted by theory. Full-feed depletion mode (FFD-SF) have only one inlet for the sample feed, and the channel is equipped with a flow stream splitter only at the outlet in SF mode. In conventional FFD-mode, it was difficult to extend channel due to splitter in channel. So, we use large scale splitter-less FFD-SF to increase TP from increase channel scale. In this study, a FFD-SF channel was developed for a large-scale fractionation, which has no flow stream splitters (‘splitter less’), and then was tested for optimum TP and FE by varying the sample concentration and the flow rates at the inlet and outlet of the channel. Polyurethane (PU) latex beads having two different size distribution (about 3~7 µm, and about 2~30 µm) were used for the test. The sample concentration was varied from 0.2 to 0.8% (wt/vol). The channel flow rate was varied from 70, 100, 120 and 160 mL/min. The fractionated particles were monitored by optical microscopy (OM). The sample recovery was determined by collecting the particles on a 0.1 µm membrane filter. Accumulation of relatively large micron sized particles in channel could be prevented by feeding carrier liquid. It was found that, in order to achieve effective TP, the concentration of sample should be at higher than 0.4%.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.524-532
• /
• 2020

In this study, noise radiated from a high-speed fan-motor unit for a cordless vacuum cleaner is reduced by designing splitter blades on the existing impeller. First of all, in order to investigate the flow field through a fan-motor unit, especially impeller, the unsteady incompressible Reynolds-Averaged Navier-Stokes (RANS) equations are numerically solved by using computational fluid dynamic technique. With predicted flow field results as input, the Ffowcs Williams-Hawkings (FW-H) integral equation is solved to predict aerodynamic noise radiated from the impeller. The validity of the numerical methods is confirmed by comparing the predicted sound pressure spectrum with the measured one. Further analysis of the predicted flow field shows that the strong vortex is formed between the impeller blades. As the vortex induces the loss of the flow field and acts as an aerodynamic noise source, supplementary splitter blades are designed to the existing impeller to suppress the identified vortex. The length and position of splitter are selected as design factors and the effect of each design factor on aerodynamic noise is numerically analyzed by using the Taguchi method. From this results, the optimum location and length of splitter for minimum radiated noise is determined. The finally selected design shows lower noise than the existing one.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.6
• /
• pp.373-381
• /
• 2016

In this study, we investigate the characteristics of the drag reduction of a circular cylinder having a detached splitter plate at the wake side. We measure the fluid force on a circular cylinder and visualize the field using particle image velocimetry (PIV) with a high Reynolds number, Re = 10,000. The experimental paraeters used were the width ratios (H/B = 0.5~1.5) of splitters to the prism width and the gap ratios (G/B = 0~2) between the prism and the splitter plate. The drag-reduction rate of the circular cylinder increased with H/B in the case of the same G/B, and it increased and then decreased with G/B in the case of the same H/B. The vortices of the opposite direction on the upper and lower sides of the detached splitter plate were generated by installing the plate. Reverse flow was caused by the vortices at the wake region of the circular cylinder, and the drag of the circular cylinder was decreased by the reverse flow.

• Journal of the Korean Professional Engineers Association
• /
• v.33 no.4
• /
• pp.48-53
• /
• 2000

To be survived and prosperous in this rigorous competition era for the nation with insufficient natural resources like us, we must create idea for additive products no matter small or large scale utilizing our knowledge. This is to show a small example of value creation in connection with ADSL(Asymmetric Digital Subscriber Line) POTS Splitter from developing to successful commercializing, which the ADSL system is booming up these days for high speed Internet connectivity.