• 전자공학회논문지SC
• /
• 제47권1호
• /
• pp.47-55
• /
• 2010

심음은 심질환을 진단하는 1차적인 수단이지만 비정상 심음인 S2에서 A2와 P2의 분열 신호와 S2에 S3의 분마음 간섭 신호는 전문 의사들조차 청각적으로 구분하기 쉽지 않아 초기 진단에 어려움이 있다. 본 논문에서는 청각적으로 구분이 어려운 심음들을 분류하기 위해 PCG 신호의 주파수 특성에 적합한 분석 및 합성 방법을 제안한다. 제안한 방법은 심음을 매칭 퍼슈잇으로 분해한 후 주파수 특성에 맞게 대역별로 합성하여 분석함으로써 청진으로 구분이 어려운 신호를 다른 상태의 심음과 구별한다. 실험 결과 분석을 통해 초기 진단 시 불명확한 S2의 분열 유무, S2의 분열 상태, 그리고 S3의 분마음 간섭 신호를 구별할 수 있었으며 분열의 정확한 시간 간격을 확인할 수 있었다.

• Journal of electromagnetic engineering and science
• /
• 제19권2호
• /
• pp.115-121
• /
• 2019

This paper presents the effects of the position of the split of a split-ring resonator (SRR) on the performance of a composite broadband printed dipole antenna. The antenna is made of two printed dipole arms enclosed by two rectangular and identically printed SRRs. One dipole arm and the SRR are printed on the top side of the substrate, while the other dipole arm and SRR are printed on the bottom side of the same substrate. By changing the position of the split on the SRR, different antenna characteristic values are obtained, namely, for impedance bandwidth and radiation patterns. The split position is thus a critical parameter in antenna design, because it influences the antenna's major performance immensely. Different split positions and their consequences for antenna performance are demonstrated and discussed. The antenna generates linearly polarized radiations, and it is computationally characterized for broadband characteristics. The optimized compact antenna has overall dimensions of 9.6 mm × 74.4 mm × 0.508 mm (0.06λ × 0.469λ × 0.0032λ at 1.895 GHz) with a measured fractional bandwidth of 60.31% (1.32 to 2.46 GHz for |S₁₁| <-10 dB) and a radiation efficiency of >88%.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제15권3호
• /
• pp.114-121
• /
• 2007

In this study, a modified reverse flow type, one of the triple effect absorption cycles, is studied for performance improvement. The cycle simulation is carried out by using EES(Engineering Equation Solver) program for the working fluid of $H_2O/LiBr$ solution. The split-ratios of solution flow rate, UA of each component, pumping mass flow rate of solution are considered as key parameters. The results show that the optimal SRH (split ratio of high side) and SRL (split ratio of low side) values are 0.596 and 0.521, respectively. Under these conditions, the COP is maximized to 2.1. The optimal pumping mass flow rate is selected as 3 kg/s and the corresponding UAEV A is 121 kW/K in the present system. The present simulation results are compared to the other literature results from Kaita's (2002) and Cho's (1998) triple effect absorption systems. The present system has a lower solution temperature and a higher COP than the Kaita's modified reverse flow, and it also gives a higher COP than the Cho's parallel flow by adjusting split ratios.

• 한국의류학회지
• /
• 제20권6호
• /
• pp.947-961
• /
• 1996

The study is about the grading methods for the apparel CAD systems. So far the shift grading is used mostly in the industry. But the split grading has its advantage such as less data Input which is required for grading. So the research is aimed to prove that the split grading is not accurate than the shift grading and more efficient in speed, and to give the guidance of the split grading so that the split grading method can be applied in future apparel CAD systems more often. The results of the research were: 1. Split yarding produced graded patterns as accurate as shift grading. Yet split grading was more efficient and convenient because it required less data input than shift grading. 2. The 10 grading charts were grouped into 3 groups by the bust girth intervals, 3 cm grading, 4 cm grading and 5cm grading. 3. The grading areas were varied depending on the grament designs, gradre's skill and the grading intervals. 4. Guidance for the split grading was suggested.

• Clinical and Experimental Reproductive Medicine
• /
• 제44권2호
• /
• pp.96-104
• /
• 2017

Objective: This study aimed to compare the clinical outcomes between in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) in sibling oocytes. Additionally, we evaluated whether the implementation of split insemination contributed to an increase in the number of ICSI procedures. Methods: A total of 571 cycles in 555 couples undergoing split insemination cycles were included in this study. Among them, 512 cycles (89.7%) were a couple's first IVF cycle. The patients were under 40 years of age and at least 10 oocytes were retrieved in all cycles. Sibling oocytes were randomly allocated to IVF or ICSI. Results: Total fertilization failure was significantly more common in IVF cycles than in ICSI cycles (4.0% vs. 1.4%, p<0.05), but the low fertilization rate among retrieved oocytes (as defined by fertilization rates greater than 0% but < 30%) was significantly higher in ICSI cycles than in IVF cycles (17.2% vs. 11.4%, p<0.05). The fertilization rate of ICSI among injected oocytes was significantly higher than for IVF ($72.3%{\pm}24.3%$ vs. $59.2%{\pm}25.9%$, p<0.001), but the fertilization rate among retrieved oocytes was significantly higher in IVF than in ICSI ($59.2%{\pm}25.9%$ vs. $52.1%{\pm}22.5%$, p<0.001). Embryo quality before embryo transfer was not different between IVF and ICSI. Although the sperm parameters were not different between the first cycle and the second cycle, split insemination or ICSI was performed in 18 of the 95 cycles in which a second IVF cycle was performed. Conclusion: The clinical outcomes did not differ between IVF and ICSI in split insemination cycles. Split insemination can decrease the risk of total fertilization failure. However, unnecessary ICSI is carried out in most split insemination cycles and the use of split insemination might make ICSI more common.

• 한국정보기술학회논문지
• /
• 제17권3호
• /
• pp.43-50
• /
• 2019

본 논문에서는 수직 분할 링 공진기(VSRR, Vertical Split Ring Resonator)를 적용하여 전기적 크기를 축소시킨 발진기를 제안하였다. VSRR은 유전체 기판의 상면과 하면에 일렬로 놓인 마이크로스트립 라인간에 발생하는 커패시턴스와 인덕턴스에 의해서 공진기로 동작하는 분리형 링 공진기(Split Ring Resonator)형태이며, 마이크로스트립 라인을 이용한 일반적인 hairpin 형태 또는 평면형 링 공진기에 비해 공진 회로의 전기적 크기를 축소할 수 있는 장점이 있다. 본 논문에서는 S-band에서 동작하는 VSRR을 설계하고, 이를 공진회로로 사용한 발진기를 설계 및 구현한 결과를 제시하였다. 제안된 발진기는 2.4GHz에서 5.9dBm의 출력을 나타내었으며, 오프셋 주파수 100kHz에서 -112.58dBc@Hz, 1MHz에서 -137.36dBc@Hz의 위상잡음 특성을 나타내었다.

• Journal of Microbiology and Biotechnology
• /
• 제34권6호
• /
• pp.1322-1327
• /
• 2024

The accurate and rapid detection of methicillin-resistant Staphylococcus aureus (MRSA) holds significant clinical importance. This work presents a new method for detecting methicillin-resistant Staphylococcus aureus (S. aureus) in clinical samples. The method uses an aptamer-based colorimetric assay that combines a recognizing probe to identify the target and split DNAzyme to amplify the signal, resulting in a highly sensitive and direct analysis of methicillin-resistance. The identification of the PBP2a protein on the membrane of S. aureus in clinical samples leads to the allosterism of the recognizing probe, and thus provides a template for the proximity ligation of split DNAzyme. The proximity ligation of split DNAzyme forms an intact DNAzyme to identify the loop section in the L probe and generates a nicking site to release the loop sequence ("3" and "4" fragments). The "3" and "4" fragments forms an intact sequence to induce the catalytic hairpin assembly, exposing the G-rich section. The released the G-rich sequence of LR probe induces the formation of G-quadruplex-hemin DNAzyme as a colorimetric signal readout. The absorption intensity demonstrated a strong linear association with the logarithm of the S. aureus concentration across a wide range of 5 orders of magnitude dynamic range under the optimized experimental parameters. The limit of detection was calculated to be 23 CFU/ml and the method showed high selectivity for MRSA.

• 전기전자학회논문지
• /
• 제26권3호
• /
• pp.500-505
• /
• 2022

본 연구에서는 새로운 구조의 dual gate tri-layer split channel 박막트랜지스터를 제작하였다. 전류 구동 능력을 향상시키기 위해 액티브 층의 양쪽에 게이트를 형성하였고 전하이동도를 증가시키기 위하여 액티브 층에서 채널이 형성되는 구간인 첫번째 층과 세번째 층에 전도성이 높은 ITO 층을 배치하였다. 추가적으로 분할 채널을 이용하여 채널의 series 저항을 낮추면서 분할한 채널의 측면에서도 accumulation을 유도하여 전하이동도를 향상시켰다. 기존의 single gate a-ITGZO 박막트랜지스터가 15 cm²/Vs의 전하이동도를 가지는 반면 dual gate tri-layer split channel 박막트랜지스터는 134 cm²/Vs의 높은 전하이동도를 가졌다.

• 전자통신동향분석
• /
• 제37권3호
• /
• pp.1-10
• /
• 2022

Traditional centralized radio access network architecture used for 4G is based on Option 8, a functional split between PHY and RF. This option is commonly used with a fronthaul interface based on common public radio interface (CPRI) specifications; however, the increased data rates in 5G make this option impractical because of the fronthaul interface's high bandwidth requirement. Since CPRI specifications have many vendor-specific options, achieving multi-vendor interoperability becomes challenging. Open RAN (O-RAN) Alliance is developing novel open fronthaul interface specifications based on the functional split Option 7-2x, one of the intra-PHY split options, to relax the bandwidth requirement of the fronthaul interface and achieve multi-vendor interoperability. This article provides a brief overview of the various functional split options for 5G fronthaul that have been reported so far and existing fronthaul technologies. Further, the technological trends in the 5G open fronthaul interface is discussed, focusing on the O-RAN Alliance specifications under standardization.

• Computers and Concrete
• /
• 제9권2호
• /
• pp.81-97
• /
• 2012

This paper presents development of double-K fracture model for the split-tension cube specimen for determining the unstable fracture toughness and initial cracking toughness of concrete. There are some advantages of using of split-tension cube test like compactness and lightness over the existing specimen geometries in practice such as three-point bend test, wedge splitting test and compact tension specimen. The cohesive toughness of the material is determined using weight function having four terms for the split-tension cube specimen. Some empirical relations are also suggested for determining geometrical factors in order to calculate stress intensity factor and crack mouth opening displacement for the same specimen. The results of double-K fracture parameters of split-tension cube specimen are compared with those obtained for compact tension specimen. Finally, the influence of the width of the load-distribution of split-tension cube specimen on the double-K fracture parameters for laboratory size specimens is investigated. The input data required for determining double-K fracture parameters for both the specimen geometries are obtained using well known version of the Fictitious Crack Model.