• Title/Summary/Keyword: split of S2

Search Result 481, Processing Time 0.034 seconds

Matching Pursuit based on Frequency Characteristics of Heart Sounds for Phonocardiogram Analysis (심음 분석을 위한 주파수 특성에 기반한 매칭퍼슈잇 방법)

  • Kim, Il-Dong;Jeong, Gyu-Hyeok;Lim, Jong-Ha;Lee, In-Sung
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.47 no.1
    • /
    • pp.47-55
    • /
    • 2010
  • Although heart auscultation is an important tool for the diagnosis of heart disease, it is seen that the human ear is poorly suited for cardiac auscultation such as the paradoxical split of S2, the split of S2, and the summation of S2 and S3 gallop. In this paper, the analysis-synthesis method that is suitable for the characteristics of PCG is proposed to classify the heart sound. In analyzing the PCG according to matching pursuit method and synthesizing the PCG in each bandwidth based on the frequency characteristics, it sorts normal hearts with abnormal hearts that is difficult to classify as cardiac auscultation. The result shows that it qualifies the appearance of split in S2 and the paradoxical split of S2 and also can estimate the delay between the two components.

Effects of Split Position on the Performance of a Compact Broadband Printed Dipole Antenna with Split-Ring Resonators

  • Kedze, Kam Eucharist;Wang, Heesu;Park, Ikmo
    • Journal of electromagnetic engineering and science
    • /
    • v.19 no.2
    • /
    • pp.115-121
    • /
    • 2019
  • This paper presents the effects of the position of the split of a split-ring resonator (SRR) on the performance of a composite broadband printed dipole antenna. The antenna is made of two printed dipole arms enclosed by two rectangular and identically printed SRRs. One dipole arm and the SRR are printed on the top side of the substrate, while the other dipole arm and SRR are printed on the bottom side of the same substrate. By changing the position of the split on the SRR, different antenna characteristic values are obtained, namely, for impedance bandwidth and radiation patterns. The split position is thus a critical parameter in antenna design, because it influences the antenna's major performance immensely. Different split positions and their consequences for antenna performance are demonstrated and discussed. The antenna generates linearly polarized radiations, and it is computationally characterized for broadband characteristics. The optimized compact antenna has overall dimensions of 9.6 mm × 74.4 mm × 0.508 mm (0.06λ × 0.469λ × 0.0032λ at 1.895 GHz) with a measured fractional bandwidth of 60.31% (1.32 to 2.46 GHz for |S11| <-10 dB) and a radiation efficiency of >88%.

Simulation of $H_2O/LiBr$ Triple Effect Absorption Systems with a Modified Reverse Flow

  • Jo, Young-Kyong;Kim, Jin-Kyeong;Kang, Yang-Tae
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • v.15 no.3
    • /
    • pp.114-121
    • /
    • 2007
  • In this study, a modified reverse flow type, one of the triple effect absorption cycles, is studied for performance improvement. The cycle simulation is carried out by using EES(Engineering Equation Solver) program for the working fluid of $H_2O/LiBr$ solution. The split-ratios of solution flow rate, UA of each component, pumping mass flow rate of solution are considered as key parameters. The results show that the optimal SRH (split ratio of high side) and SRL (split ratio of low side) values are 0.596 and 0.521, respectively. Under these conditions, the COP is maximized to 2.1. The optimal pumping mass flow rate is selected as 3 kg/s and the corresponding UAEV A is 121 kW/K in the present system. The present simulation results are compared to the other literature results from Kaita's (2002) and Cho's (1998) triple effect absorption systems. The present system has a lower solution temperature and a higher COP than the Kaita's modified reverse flow, and it also gives a higher COP than the Cho's parallel flow by adjusting split ratios.

A Study on Split Grading of the Apparel CAD Systems (효율적인 스플릿(Split) 그레이딩 방식의 어패럴 CAD시스템 사용방법에 관한 연구 -국내 사용업체들의 실태조사를 통한-)

  • 조윤경;조진숙
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.20 no.6
    • /
    • pp.947-961
    • /
    • 1996
  • The study is about the grading methods for the apparel CAD systems. So far the shift grading is used mostly in the industry. But the split grading has its advantage such as less data Input which is required for grading. So the research is aimed to prove that the split grading is not accurate than the shift grading and more efficient in speed, and to give the guidance of the split grading so that the split grading method can be applied in future apparel CAD systems more often. The results of the research were: 1. Split yarding produced graded patterns as accurate as shift grading. Yet split grading was more efficient and convenient because it required less data input than shift grading. 2. The 10 grading charts were grouped into 3 groups by the bust girth intervals, 3 cm grading, 4 cm grading and 5cm grading. 3. The grading areas were varied depending on the grament designs, gradre's skill and the grading intervals. 4. Guidance for the split grading was suggested.

  • PDF

Comparison of clinical outcomes between in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) in IVF-ICSI split insemination cycles

  • Lee, Sun Hee;Lee, Jae Hyun;Park, Yong-Seog;Yang, Kwang Moon;Lim, Chun Kyu
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.44 no.2
    • /
    • pp.96-104
    • /
    • 2017
  • Objective: This study aimed to compare the clinical outcomes between in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) in sibling oocytes. Additionally, we evaluated whether the implementation of split insemination contributed to an increase in the number of ICSI procedures. Methods: A total of 571 cycles in 555 couples undergoing split insemination cycles were included in this study. Among them, 512 cycles (89.7%) were a couple's first IVF cycle. The patients were under 40 years of age and at least 10 oocytes were retrieved in all cycles. Sibling oocytes were randomly allocated to IVF or ICSI. Results: Total fertilization failure was significantly more common in IVF cycles than in ICSI cycles (4.0% vs. 1.4%, p<0.05), but the low fertilization rate among retrieved oocytes (as defined by fertilization rates greater than 0% but < 30%) was significantly higher in ICSI cycles than in IVF cycles (17.2% vs. 11.4%, p<0.05). The fertilization rate of ICSI among injected oocytes was significantly higher than for IVF ($72.3%{\pm}24.3%$ vs. $59.2%{\pm}25.9%$, p<0.001), but the fertilization rate among retrieved oocytes was significantly higher in IVF than in ICSI ($59.2%{\pm}25.9%$ vs. $52.1%{\pm}22.5%$, p<0.001). Embryo quality before embryo transfer was not different between IVF and ICSI. Although the sperm parameters were not different between the first cycle and the second cycle, split insemination or ICSI was performed in 18 of the 95 cycles in which a second IVF cycle was performed. Conclusion: The clinical outcomes did not differ between IVF and ICSI in split insemination cycles. Split insemination can decrease the risk of total fertilization failure. However, unnecessary ICSI is carried out in most split insemination cycles and the use of split insemination might make ICSI more common.

Design of a S-band Oscillator Using Vertical Split Ring Resonator (수직 분할 링 공진기를 이용한 S-밴드 발진기 설계)

  • Lee, Ju-Heun;Hong, Min-Cheol;Oh, Jeong-Taek;Yoon, Won-Sang
    • The Journal of Korean Institute of Information Technology
    • /
    • v.17 no.3
    • /
    • pp.43-50
    • /
    • 2019
  • In this paper, we propose a S-band oscillator with a reduced electrical size by applying a vertical split ring resonator(VSRR). The VSRR is a type of split ring resonator that operates as a resonator by the capacitance and inductance generated between the microstrip lines arranged on the top and bottom of the dielectric substrate and it has an advantage that the electrical size of the resonance circuit can be reduced as compared with the conventional ring resonator. In this paper, we design a VSRR operating over S-band and an oscillator using the VSRR as the resonant circuit. The proposed oscillator showed the output of 5.9dBm at 2.4HGz and showed the phase noise characteristics of -112.58dBc at 100KHz offset frequency and -117.85dBc at 1MHz offset.

Effect of Channel and Gate Structures on Electrical Characteristics of Oxide Thin-Film Transistors (Channel과 gate 구조에 따른 산화물 박막트랜지스터의 전기적 특성 연구)

  • Kong, Heesung;Cho, Kyoungah;Kim, Jaybum;Lim, Junhyung;Kim, Sangsig
    • Journal of IKEEE
    • /
    • v.26 no.3
    • /
    • pp.500-505
    • /
    • 2022
  • In this study, we designed oxide thin-film transistors (TFTs) with dual gate and tri layered split channels, and investigated the structural effect of the TFTs on the electrical characteristics. The dual gates played a key role in increasing the driving current, and the channel structure of tri layers and split form contributed to the increase in the carrier mobility. The tri layered channels consisting of the a-ITGZO and two ITO layers inserted between the gate dielectric and a-ITGZO led to the increase in the on-current by using ITO layers with high conductivity, and the split channels lowered series resistance of the channels. Compared with the mobility (15 cm2/V·s) of the single gate a-ITGZO TFT, the mobility (134 cm2/V·s) of the dual gate tri-layer split channel TFT was remarkably enhanced by the structural effect.

Technological Trends in Open 5G Fronthaul (개방형 5G 프론트홀 기술 동향)

  • Lee, J.S.;Park, J.W.;Lee, M.S.
    • Electronics and Telecommunications Trends
    • /
    • v.37 no.3
    • /
    • pp.1-10
    • /
    • 2022
  • Traditional centralized radio access network architecture used for 4G is based on Option 8, a functional split between PHY and RF. This option is commonly used with a fronthaul interface based on common public radio interface (CPRI) specifications; however, the increased data rates in 5G make this option impractical because of the fronthaul interface's high bandwidth requirement. Since CPRI specifications have many vendor-specific options, achieving multi-vendor interoperability becomes challenging. Open RAN (O-RAN) Alliance is developing novel open fronthaul interface specifications based on the functional split Option 7-2x, one of the intra-PHY split options, to relax the bandwidth requirement of the fronthaul interface and achieve multi-vendor interoperability. This article provides a brief overview of the various functional split options for 5G fronthaul that have been reported so far and existing fronthaul technologies. Further, the technological trends in the 5G open fronthaul interface is discussed, focusing on the O-RAN Alliance specifications under standardization.

Determination of double-K fracture parameters of concrete using split-tension cube test

  • Kumar, Shailendra;Pandey, S.R.
    • Computers and Concrete
    • /
    • v.9 no.2
    • /
    • pp.81-97
    • /
    • 2012
  • This paper presents development of double-K fracture model for the split-tension cube specimen for determining the unstable fracture toughness and initial cracking toughness of concrete. There are some advantages of using of split-tension cube test like compactness and lightness over the existing specimen geometries in practice such as three-point bend test, wedge splitting test and compact tension specimen. The cohesive toughness of the material is determined using weight function having four terms for the split-tension cube specimen. Some empirical relations are also suggested for determining geometrical factors in order to calculate stress intensity factor and crack mouth opening displacement for the same specimen. The results of double-K fracture parameters of split-tension cube specimen are compared with those obtained for compact tension specimen. Finally, the influence of the width of the load-distribution of split-tension cube specimen on the double-K fracture parameters for laboratory size specimens is investigated. The input data required for determining double-K fracture parameters for both the specimen geometries are obtained using well known version of the Fictitious Crack Model.

Performance Analysis of Compound CVTs with a 2K-HI (2K-HI 형식 복합형 무단변속기의 성능실험)

  • Park J.M.;Kim Y.S.;Lee S.H.;Choi S.H.
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2005.06a
    • /
    • pp.1345-1348
    • /
    • 2005
  • We designed the compound CVT (Continuously Variable Transmissions) by combining power circulation mode CVT and power split mode CVT, which have been proposed for connecting 2K-H I differential gear to the V- belt type CVU (Continuously Variable Unit), as an input coupled type. With the designed compound CVT, we carried out theoretical analysis and performance experiments. We proved that the compound CVT had a better performance than either of the power circulation mode or power split mode.

  • PDF