• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.70-79
• /
• 1997

Ni-base self-fluxing alloy powder particles were flame sprayed onto the SS400 mild steel substrate surface. The effects of both substrate temperature and spraying distance on the splat behavior of sprayed particles were examined. The results obtained are summarized as follows: 1) In the splat behavior of Ni-base self-fulxing alloy particles sprayed onto the SS400 mild steel substrate, splashing was observed under the room temperature condition. On the contrary, it showed circular plate pattern in the substrate temperature range over 373K. 2) It was cleared that there was close relationship between mechanical properties of coating layer and splat behavior of sprayed particles. 3) From the experimental results, optimum spraying conditions showed excellent mechanical properties in the case of Ni-base self fluxing alloy sprayed onto the SS400 mild substrate were 473K of substrate temperature and 250mm of spraying distance.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.509-510
• /
• 2006

Correlations between in-flight particle, splat and coating microstructure of thermally sprayed Ni20Cr were investigated. Flame spray and arc spray systems were employed for spraying Ni20Cr powder and Ni20Cr wire, respectively. The results showed that the arc spray process produced a broader size distribution for both in-flight particles and splats compared to flame process. Flower-like splat morphology was obtained from the arc spray whereas a pancake-like splat was obtained by flame spray. Ni20Cr coating sprayed by arc process had a denser microstructure, lower porosity and better adhesion at the interface.

• Korean Journal of Materials Research
• /
• v.26 no.5
• /
• pp.229-234
• /
• 2016

In this study, the degree of particle melting in $Y_2O_3$ plasma spraying and its effects on coating characteristics have been investigated in terms of microstructural features, microhardness and scratch resistance. Plasma sprayed $Y_2O_3$ coatings were formed using two different powder feeding systems: a system in which the powder is fed inside the plasma gun and a system in which the powder is fed externally. The internal powder spraying method generated a well-defined lamellae structure that was characterized by a thin porous layer at the splat boundary and microcracks within individual splats. Such micro-defects were generated by the large thermal contraction of splats from fully-molten droplets. The external powder spraying method formed a relatively dense coating with a particulate deposition mode, and the deposition of a higher fraction of partially-melted droplets led to a much reduced number of inter-splat pores and intra-splat microcracks. The microhardness and scratch resistance of the $Y_2O_3$ coatings were improved by external powder spraying; this result was mainly attributed to the reduced number of micro-defects.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.276-278
• /
• 2020

포인트 클라우드 콘텐츠는 실제 사물을 수천만 개의 점으로 표현하는 미디어 콘텐츠이다. 각 점들은 색상 값과 3 차원 공간상의 위치로 구성 되어있다. 이러한 컨텐츠를 영상 미디어로 활용하기 위해서는 실시간으로 네트워크를 통해 전달되는 포인트 클라우드 콘텐츠를 고품질의 영상으로 시각화 할 필요성이 있다. 본 연구에서는 포인트 클라우드 콘텐츠를 구성하는 점들이 임의의 순서로 입력될 때, 각 점이 투영된 형상을 원형으로 나타내어 블렌딩하는 원형 splat 기반의 실시간 시각화 기법을 제안한다.

• The Korean Journal of Pesticide Science
• /
• v.11 no.1
• /
• pp.46-51
• /
• 2007

In this study, two commercial mating disruptors were compared in terms of disruption of Oriental fruit moth, Grapholita molesta, male orientation, in which a new dispenser type, $SPLAT^{(R)}$, was compared with a current dispenser type, $Isomate^{(R)}$-M ROSSO. For this assessment, the last three year field monitoring data were analyzed for the efficacy of Isomate type dispenser. Then two commercial dispensers were compared in different localities with sub-locality replications during identical monitoring period from mid February to late August. There appeared to be four adult population peaks, in which the overwintering population size was positively correlated with the following reproductive population sizes. Isomate type dispenser effectively suppressed G. molesta populations during all growing seasons with some annual variation in its efficacy. Between two dispensers, SPLAT type was much effective. The difference in their efficacy may be caused by the difference in composition of major pheromone component.

• Korean journal of applied entomology
• /
• v.45 no.2 s.143
• /
• pp.235-240
• /
• 2006

Efficacies of two commercial mating distruptor (SPLAT$^{(R)}$ and Isomate$^{(R)}$-ROSSO) were evaluated on field overwintering populations of Oriental fruit moth, Grapholita molesta (Busck), in four apple orchards. Based on the monitoring with sex pheromone traps, all the orchards (Youngchun, Kyungsan, Chungsong, and Youngju in Korea) exhibited significant overwintering populations from late April to late May. Both mating disruptors that were applied 10 days before the monitoring period significantly inhibited the male orientation to the monitoring lures, in which SPLAT type was more effective than Isomate type in the disrupting efficacy. The disruption of male orientation was highly correlated with the reduction in the early leaf damage caused mostly by G. molesta.

• Journal of the Korea Computer Graphics Society
• /
• v.14 no.4
• /
• pp.27-33
• /
• 2008

Physics-based graphic techniques are used when simulating and rendering natural phenomena such as smoke, water and flame with computational physics. We propose novel methods which render simulated particle data fast onto 3D using tetrahedron splat. We calculate the position and the normal vector of splat by SPH(smoothed particle hydrodynamics) method then we reconstruct splat into quadrangular pyramid to reduce seam. We implement this technique for SPH fluid simulation, and animate natural flow of water successfully.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.4
• /
• pp.467-474
• /
• 2004

A large-eddy simulation is performed for turbulent flow in a concentric annulus with the inner wall rotation at Re$\sub$Dh/=8900 for three rotation rates N=0.2145, 0.429 and 0.858. Main emphasis is placed on the inner wall rotation effect on near-wall turbulent structures. Near-wall turbulent structures close to the inner wall are scrutinized by computing the lower-order statistics. The anisotropy invariant map for the Reynolds stress tensor and the invariant function are illustrated to reveal the altered anisotropy in turbulent structure. Probability density functions of the splat/anti-splat process are explored to develop a sufficiently complete picture of the contributions of the flow events to turbulent production. The present numerical results show that the altered turbulent structures may be attributed to the centrifugal instability, which leads to the augmentation of sweep and ejection events.

• Journal of Power System Engineering
• /
• v.16 no.2
• /
• pp.49-53
• /
• 2012

Thermal spray coatings developed by deposition of splats, it formed by impacting molten droplets on substrates during thermal spray process. In this study, the Ni-based coatings were fabricated by thermal spray process with two different process parameters, oxygen gas flow and acetylene gas flow, with three different levels of each parameters. The morphology of splats and microstructure were observed by optical microscope. Hardness test were performed on the Ni-based coatings. It was confirmed that process parameters of thermal spray process have effect in morphology of splats. These effects also have important implications on the deposit microstructure and properties of Ni-based coatings.

• Korean Journal of Materials Research
• /
• v.9 no.4
• /
• pp.428-433
• /
• 1999

An objective of this study is to compare the characteristics of coating layer of plasma sprayed fine $Al_2O_3$ and those of layer by commercial $Al_2O_3$(Metco 105). The microstructure of fine $Al_2O_3$ coating layer was denser compared with commercial $Al_2O_3$ coating layer. The surface roughness$(R_a)$ of the layer by the fine $Al_2$O$_3$ was lower compared with that of commercial $Al_2O_3$. Thickness of splat for fine $Al_2O_3$ was $1.4\mu\textrm{m}$ while the commercial $Al_2O_3$ was $3.53\mu\textrm{m}$. The main phase existing in coating layer was of $\gamma-Al_2O_3$ and the fraction of $\alpha-Al_2O_3$ in fine $Al_2O_3$ coating layer was 8.39% and that of commercial $Al_2O_3$ was 13.79%. Microhardness was no great difference between the fine and commercial $Al_2O_3$ but deviation of the fine $Al_2O_3$ coating layer was relatively large. Accordingly, the strength of splat of the coating was expected that fine $Al_2O_3$was lower than commercial $Al_2O_3$ powder.