• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.402-408
• /
• 2017

In this paper, we analyzed the frequency characteristics of hexagonal spiral thin-film inductor based on non-contact AC coupling for wireless signal transmission. We compared and analyzed the frequency characteristics of the rectangular spiral inductor and the hexagonal spiral inductor according to the number of turns, the line width and the line spacing of the conductor. Hexagonal spiral inductor has more number of turns to has the same inductance as rectangular spiral inductor, but the overall length of the conductors is shortened. This reduces the self inductance and increases the mutual inductance so that the overall inductance can have the same value. Also, since the overall length of the conductor is shortened and the magnetic resistance is reduced, the quality factor and the self-resonant frequency performance can be secured. The proposed hexagonal spiral thin-film inductor has the inductance of 3.54nH at 2GHz, the quality factor of max 14.00 at 5.0GHz and the self-resonant frequency at about 11.3GHz.

• Smart Structures and Systems
• /
• v.21 no.1
• /
• pp.27-35
• /
• 2018

In the water-filling and preloading test, the sensing cables were installed on the surface of steel spiral case and in the surrounding concrete to monitor the strain distribution of several cross-sections by using Brillouin Optical Time Domain Analysis (BOTDA), a kind of distributed optical fiber sensing (DOFS) technology. The average hoop strain of the spiral case was about $330{\mu}{\varepsilon}$ and $590{\mu}{\varepsilon}$ when the water-filling pressure in the spiral case was 2.6 MPa and 4.1 MPa. The difference between the measured and the calculated strain was only about $50{\mu}{\varepsilon}$. It was the first time that the stress adjustment of the spiral case was monitored by the sensing cable when the pressure was increased to 1 MPa and the residual strain of $20{\mu}{\varepsilon}$ was obtained after preloading. Meanwhile, the shrinkage of $70{\sim}100{\mu}{\varepsilon}$ of the surrounding concrete was effectively monitored during the depressurization. It is estimated that the width of the gap between the steel spiral case and the surrounding concrete was 0.51 ~ 0.75 mm. BOTDA based distributed optical fiber sensing technology can obtain continuous strain of the structure and it is more reliable than traditional point sensor. The strain distribution obtained by BOTDA provides strong support for the design and optimization of the spiral case structure.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.58-64
• /
• 2008

A 6Gbps 1:2 demultiplexer(DEMUX) IC using $0.18{\mu}m$ CMOS was designed and fabricated. For high speed performance current mode logic(CML) flipflop was used and inductive peaking technology was used so as to obtain higher speed than conventional Current mode logic flipflop. On-chip spiral inductor was designed to maximize the inductive peaking effect using stack structure. Total twelve inductors of $100{\mu}m^2$ area increase was used. The measurement was processed on wafer and 1:2 demultiplexer with and without micro stacked spiral inductors were compared. For 6Gbps data rate measurement, eye width was improved 7.27% and Jitter was improved 43% respectively. Power consumption was 76.8mW and eye height was 180mV at 6 Gbps

• Journal of Oral Medicine and Pain
• /
• v.36 no.1
• /
• pp.65-70
• /
• 2011

The purpose of this study is introduce the spiral taping treatment on Temporomandibular Disorder in oral Medicine. The taping treatment is relatively simple and dosen't have any adverse effect, so it has high stability and superior effect of treatment. In this study, using the spiral taping treatment as one of the effective taping treatments, non-stretched tape was attatched to the muscles which set limit to the range of joint movement and cause pain to temporomandibular joint. With that treatment this study tried to make effective results of treatment of temporomandibular disorder. These results suggest spiral taping treatments contribute to the improvement of tempermandibular disorders. Further this study is needed for the confirmation of this effect of spiral taping treatments on temporomandibular disorders.

• Journal of Fashion Business
• /
• v.6 no.2
• /
• pp.53-66
• /
• 2002

The spiral form, which comes from the organic form of natural phenomenon such as growth of creatures, has been used as a factor of formative shape in various fields of art until now. In conjunction herewith, this study intends to discover and express the life force and the formative beauty of natural substances with the organic spiral forms into clothing design, using various creating methods and materials such as Korean traditional paper. The natural substances with the spiral structure, such as seashells, land snails, passion flower, curled flower, growing chart of plants, Impatiens textori was used as subjects of the designs. The seven pieces of work were completed with attempts to develop aesthetic forms through the presentation techniques and methods via restructuring process of simplification, partial transformation and consolidation. Through such process the conclusion of this study is as follows: First, the nature, with unlimited possibilities, could be subject of human formative activities, leading to the creative world of formative art for designers. Second, adaptation of the spiral organic forms of nature into the contemporary clothing designs proved the motif as a source of inspiration of diverse subject, in recognition with its innate formative beauty as well as external shape. Third, design expressions via restructuring process of simplification, partial transformation and consolidation with designer's subjective point of view were adequate for the creations of contemporary fashion designs. Fourth, the Korean traditional paper, as a fine material for various shape according to the handling method, could be used appropriately in the contemporary clothing designs, expressing our aesthetic senses. Fifth and finally, expansion of the realm of formative expression of clothing through the development of possibilities of expression in contemporary clothing would enhance the creative possibilities of clothing design as formative art. In conclusion, the expression of clothing design as formative art was developed on the emphasis of re-creation of natural objects of the organic spiral form. For the future study, the applications of spiral form into everyday clothing designs, consolidating artistic senses and practical senses, are expected as opportunity of proposing developmental possibilities of the contemporary clothing designs.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.353-358
• /
• 2020

In the case of a general spiral inductor, the orientation of the port is affected as it has an asymmetric structure. In this paper, a single-layered spiral inductor that can have a symmetrical structure is proposed, and the simulation and frequency characteristics are analyzed. The general spiral inductor shows a large difference in frequency-inductance characteristics, frequency-quality factor characteristics, and self-resonant frequency according to the standard of the port, while the proposed symmetric spiral inductor has an inductance of 2.7nH, a quality factor of about 7.86, and a self-resonant frequency of about 14.1GHz without changing the port. Compared to the general spiral inductor having a large difference depending on the port, it was confirmed that the influence on the port direction was small. However, it was confirmed that the mutual inductance decreased compared to the occupied area of the coil, resulting in a low inductance, and the resistance of the coil increased more than the increase in the inductance, and the quality factor was also lowered. In the future, it is expected that inductance and quality factor can be improved through a 2-layer symmetrical spiral structure.

• PNF and Movement
• /
• v.21 no.2
• /
• pp.151-158
• /
• 2023

Purpose: This study aimed to examine the immediate effects of different breathing training techniques on diaphragm excursion and vital capacity in healthy adults. Specifically, the study focused on comparing respiratory exercise without PNF, bilateral pattern respiratory exercise, and bilateral pattern with spiral pattern respiratory exercise. Methods: Twenty-seven healthy adults in their 20s participated in the study. Diaphragm excursion and vital capacity were evaluated under three different conditions. A one-way repeated ANOVA was used to analyze the differences in diaphragm excursion and vital capacity among the interventions. Results: Statistically significant differences were observed in diaphragm excursion among the interventions, comparing respiratory exercise without PNF, bilateral pattern respiratory exercise, and bilateral pattern with spiral pattern respiratory exercise. Similarly, statistically significant differences were found in vital capacity among the interventions without PNF respiratory exercise, bilateral pattern respiratory exercise, and bilateral pattern with spiral pattern respiratory exercise. Conclusion: The study demonstrated that incorporating the spiral technique in respiratory exercise led to increased diaphragm excursion and lung capacity compared to other interventions. These findings suggest that PNF respiratory exercise combined with the spiral pattern may have clinical implications for the treatment of respiratory diseases. Further research is warranted to explore the long-term effects and clinical application of these approaches.

• Investigative Magnetic Resonance Imaging
• /
• v.10 no.2
• /
• pp.108-116
• /
• 2006

Purpose : High-resolution spiral-scan imaging is performed at 3 Tesla MRI system. Since the gradient waveforms for the spiral-scan imaging have lower slopes than those for the Echo Planar Imaging (EPI), they can be implemented with the gradient systems having lower slew rates. The spiral-scan imaging also involves less eddy currents due to the smooth gradient waveforms. The spiral-scan imaging method does not suffer from high specific absorption rate (SAR), which is one of the main obstacles in high field imaging for rf echo-based fast imaging methods such as fast spin echo techniques. Thus, the spiral-scan imaging has a great potential for the high-speed imaging in high magnetic fields. In this paper, we presented various high-resolution images obtained by the spiral-scan methods at 3T MRI system for various applications. Materials and Methods : High-resolution spiral-scan imaging technique is implemented at 3T whole body MRI system. An efficient and fast higher-order shimming technique is developed to reduce the inhomogeneity, and the single-shot and interleaved spiral-scan imaging methods are developed. Spin-echo and gradient-echo based spiral-scan imaging methods are implemented, and image contrast and signal-tonoise ratio are controlled by the echo time, repetition time, and the rf flip angles. Results : Spiral-scan images having various resolutions are obtained at 3T MRI system. Since the absolute magnitude of the inhomogeneity is increasing in higher magnetic fields, higher order shimming to reduce the inhomogeneity becomes more important. A fast shimming technique in which axial, sagittal, and coronal sectional inhomogeneity maps are obtained in one scan is developed, and the shimming method based on the analysis of spherical harmonics of the inhomogeneity map is applied. For phantom and invivo head imaging, image matrix size of about $100{\times}100$ is obtained by a single-shot spiral-scan imaging, and a matrix size of $256{\times}256$ is obtained by the interleaved spiral-scan imaging with the number of interleaves of from 6 to 12. Conclusion : High field imaging becomes increasingly important due to the improved signal-to-noise ratio, larger spectral separation, and the higher BOLD-based contrast. The increasing SAR is, however, a limiting factor in high field imaging. Since the spiral-scan imaging has a very low SAR, and lower hardware requirements for the implementation of the technique compared to EPI, it is suitable for a rapid imaging in high fields. In this paper, the spiral-scan imaging with various resolutions from $100{\times}100$ to $256{\times}256$ by controlling the number of interleaves are developed for the high-speed imaging in high magnetic fields.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.645-648
• /
• 1998

We used a three-dimensional inductance extraction program, Fasthenry for optimal design of the spiral inductors on silicon substrate. The inductance and quality factor of the spiral inductors with various design parameters were calculated so that the optimal parameter value was determined. The spiral inductors then were fabricated using different foundary processes and were measured using the network analyzer and microwave probes. The pad and other parasitics of measurement system were de-embedded using the y-parameter calibration technique. the inductors fabricated using the LG 0.8um process and HP 0.5um process showed the quality factor of 5.8 and 3, respectively. Finally the equivalent circuit farameters of the spiral inductors on silicon substrate were extracted from the measurement data using the matlab.

• Journal of radiological science and technology
• /
• v.19 no.2
• /
• pp.45-49
• /
• 1996

To determine the utility of spiral computed tomography(CT) in the evaluation of carotid artery stenosis, spiral CT images of 10 patients were compared with both ones of conventional angiography and magnetic resonance(MR) angiography. The severeness of stenosis was determined for each Internal carotid artery on the basis of arterial narrowness : mild stenosis : 40 % or less, moderate stenosis = $40{\sim}70%$, severe stenosis = greater than 70 % of arterial narrowness. The short examination and clear depiction of the arterial lumen In areas of complex or low flow make CT angiography attractive alternative to MR angiography. Spiral CT angiography shows normal and abnormal carotid anatomy well when compared with conventional anglography.