• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.399-405
• /
• 2018

We report the fabrication of organic field-effect transistors (OFETs) via spray coating of electrochemically exfoliated graphene (EEG) and conducting polymer hybrid as electrodes. To reduce the roughness and sheet resistance of the EEG electrodes, subsequent coating of conducting polymer (poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS)) and acid treatment was performed. After that, active channel layer was developed by spin coating of semiconducting poly(3-hexylthiophene) on the hybrid electrodes to define the bottom gate bottom contact configuration. The OFET devices with the EEG/PEDOT:PSS hybrid electrodes showed a reasonable electrical performances (field effect mobility = $0.15cm^2V^{-1}\;s^{-1}$, on/off current ratio = $10^2$, and threshold voltage = -1.57V). Furthermore, the flexible OFET devices based on the Polydimethlsiloxane (PDMS) substrate and ion gel dielectric layer exhibited higher electrical performances (field effect mobility = $6.32cm^2V^{-1}\;s^{-1}$, on/off current ratio = $10^3$, and threshold voltage = -1.06V) and excellent electrical stability until 1000 cycles of bending test, which means that the hybrid electrode is applicable to various organic electronic devices, such as flexible OFETs, supercapacitors, organic sensors, and actuators.

• Korean Journal of Radiology
• /
• v.2 no.4
• /
• pp.210-215
• /
• 2001

Objective: To investigate the efficacy of gadobenate dimeglumine (GdBOPTA) enhanced MR imaging for the detection of liver lesions in patients with primary malignant hepatic neoplasms. Materials and Methods: Thirty-one patients with histologically proven primary malignancy of the liver were evaluated before and after administration of GdBOPTA at dose 0.05 or 0.10 mmol/kg. T1-weighted spin echo (T1W-SE) and gradient echo (T1W-GRE) images were evaluated for lesion number, location, size and confidence by three off-site independent reviewers and the findings were compared to reference standard imaging (intraoperative ultrasound, computed tomography during arterial portography or lipiodol computed tomography). Results were analyzed for significance using a two-sided McNemar's test. Results: More lesions were identified on Gd-BOPTA enhanced images than on unenhanced images and there was no significant difference in lesion detection between either concentration. The largest benefit was in detection of lesions under 1 cm in size (7 to 21, 9 to 15, 16 to 18 for reviewers A, B, C respectively). In 68% of the patients with more than one lesion, Gd-BOPTA increased the number of lesions detected. Conclusion: Liver MR imaging after Gd-BOPTA increases the detection of liver lesions in patients with primary malignant hepatic neoplasm.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.30.3-31
• /
• 2015

We present a kinematic analysis of 172 likely member galaxies of the Ursa Major Cluster. In order to understand the dynamical state of the cluster, we investigate the correlation of the cluster morphology with rotation, the velocity dispersion profile, and the rotation amplitude parallel to the global rotation direction. Both the minor axis and the rotation are very well-aligned with the global rotation axis in the outer region at half radius (> 0.5 $R_{max}$), but not in the inner region. The cluster exhibits low velocity dispersion and rotation amplitude profiles in the inner region, but higher in the outer. Both profiles exhibit outwardly increasing trends, suggesting an inside-out transfer of angular momentum of dark matter via violent relaxation, as revealed by a recent off-axis major-merging simulation. From Dressler-Schectman plots in the plane of galactic positions, and velocity versus position angle of galaxy, we are able to divide the Ursa Major Cluster into two substructures: Ursa Major South (UMS) and Ursa Major North (UMN). We derive a mass of $3.2{\times}10^{14}M_{\odot}$ for the cluster through the two-body analysis by the timing argument with the distance information (37 for UMN and 36 for UMS) and the spin parameter of ${\lambda}=0.049$. The two substructures appear to have passed each other 4.4 Gyr ago and are moving away to the maximum separation.

• Journal of Technology Innovation
• /
• v.13 no.1
• /
• pp.25-54
• /
• 2005

In this study, priority setting model of new promising IT industries which will be the growth engines for the Korean IT industry, was established. Based on the AHP model, priority setting of IT new promising IT industries was conducted. Firstly, the selection cases of the new promising IT industries and major priority setting methodologies including the AHP methodology, were analyzed. The AHP model was selected as the most feasible methodology for priority setting of the new IT industries, among the various priority setting methodologies. Secondly, in setting up the AHP model for prioritization of the new promising If industries, a 'goal' was established to be priority setting of the new promising IT industries, and an 'alternatives' to be 18 new promising IT industries. Then a logical and a systematic assessment criteria including 5 main criteria('Technological Innovation', 'Market Ability', 'SPin-off Effect', 'Public Benefit', 'Strategic Importance') and 14 sub-criteria, were developed for priority setting of the 18 new promising industries. Finally, with the AHP model, the substantial analysis was made to set up priority of the 18 new promising IT industries. The substantial analysis showed the following priority setting results and implications for the 18 new promising IT industries.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.8
• /
• pp.48-53
• /
• 2001

In order to increase productivity and efficiency, high-speed rotating machines become popular these days. The high-speed rotating machine is likely to vibrate and cause machine failure even though it has small unbalance. Therefore, a balancing technique is studied in this paper. Off-line balancing methods are inadequate to solve unbalance vibration problem occurring in the field due to flexible rotor effect, faster tool change, and shorter spin-up and down, etc. An active balancing is suggested to allow re-balancing of the entire rotating assembly in the machine when a tool is changed. This paper shows how to identify the dynamics of the system using influence coefficient and suggest an active balancing technique based on influence coefficient method for high-speed spindle system.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.57
• /
• pp.111-135
• /
• 2013

This study analyzes some important spin-off effects of the provision, UCP600 Article 14(6), through the methodology of the expected utility maximization theory based on the state-contingent commodities model. Some technical implications of this study are as follows. First, the risk-averse beneficiary will choose to present his documents more than 5 days before expiry date by paying a higher risk premium (so-called cure period) for full assurance to cure documentary discrepancies, if expressed economically, he pursues loss reducing activities to the point where the expected marginal product of his activities is less than its marginal cost. Secondly, where the effectiveness of securing cure period is uncertain, the risk-averse beneficiary will choose to present documents just on the expiry date without securing any cure period by paying no risk premium. This study finally suggests the safe harbor standard should be optimal solution only if it is supplemented by the hidden reasonableness standard for balancing the conflicts of interest between beneficiaries and banks.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.1
• /
• pp.86-92
• /
• 2012

The well-used actuators for the attitude control of spacecrafts are thruster, reaction wheel, control moment gyroscope, and magnetic torquer. Among them, the control moment gyroscope(CMG) which generates the torque based on the gyroscopic principle in physics, has an advantage of the high torque output compared to the low power consumption. This paper introduces an outline of CMG hardware technology, its application history in spacecrafts, and their associated hardware characteristics. Moreover, its spin-off cases to the other industrial fields such as ship, robotics, and MEMS including their research trend are provided.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.4
• /
• pp.271-279
• /
• 2019

The purpose of this study is to identify the barriers of university and industry cooperation and to develop recommendations for the internal ecosystem of technology commercialization. The research method used is a survey of three categories of experts from 9 universities of Almaty (researchers, technology transfer managers, spin-off-owners). Despite the strong efforts of the government of Kazakhstan in building innovation infrastructure, there is a low level of innovation activity, less than 5% of university inventions are transferred into the industry. The results of the expert survey showed that the main barriers for cooperation between university and industry are: lack of resources to build university-industry links, lack of time due to high teaching load, poor qualification of technology transfer managers and lack of networking with industry. Based on the results of the expert survey, it is proposed to develop the ecosystem for the commercialization of university-based technologies, for which the following economic activities are important: human resources, financing, intellectual property management system, and intermediary infrastructure. The results of this study can be applied in developing the strategies and policies for universities, public research organizations, as well as for national R&D and higher education policies.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.49.3-50
• /
• 2016

Deep Ecliptic Patrol of the Southern Sky (DEEP-South) observations have been conducted officially during the off-season for exoplanet search since October 2015. Most of the allocated time for DEEP-South is devoted to targeted photometry, Opposition Census (OC), of Near Earth Asteroids (NEAs) to increase the number of such objects with known physical properties. It is efficiently achieved by multiband, time series photometry. This Opposition Census (OC) mode target objects near their opposition, with km-sized PHAs in the early stage and goes down to sub-km objects. Continuous monitoring of the sky with KMTNet is optimized for spin characterization of various kinds of asteroids, including binaries, satellites, slow/fast- and non-principal axis-rotators, and hence is expected to facilitate the debiasing of previously reported lightcurve observations. We present the preliminary lightcurves of NEAs from year one of the DEEP-South with our long term plan.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.139-140
• /
• 2008

In this study, the photocurrent (PC) spectroscopy of undoped p-type CIS layers has been investigated at temperatures ranging from 10 to 293 K. Three peaks, A, B, and C, corresponded to the intrinsic transition from the valence band states off $\Gamma_7$(A), $\Gamma_6$(B), and $\Gamma_7$(C) to the conduction band state $\Gamma_6$, respectively. The crystal field splitting and the spin orbit splitting were found at 0.0059 and 0.2301 eV, respectively, and the temperature dependence of the optical band gap could be expressed by using the empirical equation $E_g$(T) = $E_g$(0) - $(8.57\times10^{-4)T^2$/(T + 129). But the behavior of the PC was different from that generally observed in other semiconductors: the PC intensities decreased with decreasing temperature. From the relation of log $J_{ph}$ vs 1/T, where $J_{ph}$ is the PC density, the dominant level was observed at the higher temperatures. We suggest that in undoped p-type CIS layers, the trapping center limits the PC signal due to native defects and impurities with decreasing temperature.