• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.416-416
• /
• 2016

Organic-inorganic metal halide perovskite solar cells have received attention because it has a number of advantages with excellent light harvesting, high carrier mobility, and facile solution processability and also recorded recently power conversion efficiency (PCEs) of over 20%. The major issue on perovskite solar cells have been reached the limit of small area laboratory scale devices produced using fabrication techniques such as spin coating and physical vapor deposition which are incompatible with low-cost and large area fabrication of perovskite solar cells using printing and coating techniques. To solution these problems, we have investigated the feasibility of achieving fully printable perovskite solar cells by the blade-coating technique. The blade-coating fabrication has been widely used to fabricate organic solar cells (OSCs) and is proven to be a simple, environment-friendly, and low-cost method for the solution-processed photovoltaic. Moreover, the film morphology control in the blade-coating method is much easier than the spray coating and roll-to-roll printing; high-quality photoactive layers with controllable thickness can be performed by using a precisely polished blade with low surface roughness and coating gap control between blade and coating substrate[1]. In order to fabricate perovskite devices with good efficiency, one of the main factors in printed electronic processing is the fabrication of thin films with controlled morphology, high surface coverage and minimum pinholes for high performance, printed thin film perovskite solar cells. Charge dissociation efficiency, charge transport and diffusion length of charge species are dependent on the crystallinity of the film [2]. We fabricated the printed perovskite solar cells with large area and flexible by the bar-coating. The morphology of printed film could be closely related with the condition of the bar-coating technique such as coating speed, concentration and amount of solution, drying condition, and suitable film thickness was also studied by using the optical analysis with SEM. Electrical performance of printed devices is gives hysteresis and efficiency distribution.

• BMB Reports
• /
• v.43 no.5
• /
• pp.362-368
• /
• 2010

Dermcidin is a human antibiotic peptide that is secreted by the sweat glands and has no homology to other known antimicrobial peptides. As an initial step toward understanding dermcidin's mode of action at bacterial membranes, we used homonuclear and heteronuclear NMR to determine the conformation of the peptide in 50% trifluoroethanol solution. We found that dermcidin adopts a flexible amphipathic $\alpha$-helical structure with a helix-hinge-helix motif, which is a common molecular fold among antimicrobial peptides. Spin-down assays of dermcidin and several related peptides revealed that the affinity with which dermcidin binds to bacterial-mimetic membranes is primarily dependent on its amphipathic $\alpha$-helical structure and its length (>30 residues); its negative net charge and acidic pI have little effect on binding. These findings suggest that the mode of action of dermcidin is similar to that of other membrane-targeting antimicrobial peptides, though the details of its antimicrobial action remain to be determined.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.37-37
• /
• 2005

Human chorionic gonadotropin (hCG) is a heterodimeric glycoprotein hormone consisting of non-covalently linked two subunits, the ${\alpha}$ and ${\beta}$ subunit. It has been used as a infertility drug for ovulation to mimic luteinizing hormone $(LH).^{1)}$ A stable cell line was established by transfection of Rc/CMV-i-dhfr-hCG, expression vector containing hCG ${\alpha}-$ and ${\beta}-genes$, into dihydrofolate reductase-deficient CHO cells and subesquent methotrexate-mediated gene amplification. Anchorage-dependent CHO cells were adapted into a serum-free and/or animal component-free suspension medium through gradual serum weaning for the hCG production. The established cell line showed typical morphological characteristics and growth profile of CHO cells, and could produce FSH with passage-to-passage consistency. The high density perfusion culture of the CHO cells was carried out in Celligen Plus bioreactor equipped with a spin-filter as a internal cell retention device. The cell density reached up to $>1x10^{7}$ cells/ml in less than 7 days and a perfusion-control strategy based on cellular consumption rates of glucose was $established.^{2)}$ Biologically active recombinant hCG was purified by a series of chromatographic steps including anion exchange chromatography and hydrophobic interaction chromatography to homogeneity. The highly purified recombinant hCG was characterized for physicochemical, immunological and biological properties.

• Journal of Astronomy and Space Sciences
• /
• v.30 no.2
• /
• pp.91-94
• /
• 2013

We use the outer gap model to explain the spectrum and the energy dependent light curves of the X-ray and soft ${\gamma}$-ray radiations of the spin-down powered pulsar PSR B1509-58. In the outer gap model, most pairs inside the gap are created around the null charge surface and the gap's electric field separates the opposite charges to move in opposite directions. Consequently, the region from the null charge surface to the light cylinder is dominated by the outflow current and that from the null charge surface to the star is dominated by the inflow current. We suggest that the viewing angle of PSR B1509-58 only receives the inflow radiation. The incoming curvature photons are converted to pairs by the strong magnetic field of the star. The X-rays and soft ${\gamma}$-rays of PSR B1509-58 result from the synchrotron radiation of these pairs. The magnetic pair creation requires a large pitch angle, which makes the pulse profile of the synchrotron radiation distinct from that of the curvature radiation. We carefully trace the pulse profiles of the synchrotron radiation with different pitch angles. We find that the differences between the light curves of different energy bands are due to the different pitch angles of the secondary pairs, and the second peak appearing at E > 10 MeV comes from the region near the star, where the stronger magnetic field allows the pair creation to happen with a smaller pitch angle.

• Archives of Pharmacal Research
• /
• v.27 no.9
• /
• pp.947-953
• /
• 2004

The antioxidative and hepatoprotective potentials of two anthraquinones, alaternin (2-hydroxy-emodin) and emodin, to scavenge and/or inhibit hydroxyl radicals generated by the Fenton reaction and to protect tacrine-induced cytotoxicity in human liver derived HepG2 cells were evaluated, respectively. The inhibitory activity on hydroxyl radical generated in a cell-free chemical system (FeSO$_4$/$H_2O$$_2$) was investigated by a fluorescence spectrophotometer using a highly fluorescent probe, 2$^1$,7$^1$-dichlorofluorescein. The hydroxyl radical scavenging activity was determined by electron spin resonance spectroscopy using 5,5-dimethy-1-pyrroline-N-oxide as hydroxyl radicals trapping agents. Tacrine-induced HepG2 cell toxicity was determined by a 3-［4,5-dimethylthiazole-2yl］-2,5-diphenyltertrazolium bromide assay. Although the scavenging activity of alaternin on hydroxyl radical was similar to that of emodin in dose-dependent pat-terns, the inhibitory activity exhibited by the former on hydroxyl radical generation was stron-ger than that of the latter, with $IC_{50}$/ values of 3.05$\pm$0.26 $\mu$M and 13.29$\pm$3.20 $\mu$M, respectively. In addition, the two anthraquinones, alaternin and emodin showed their hepatoprotective activ-ities on tacrine-induced cytotoxicity, and the EC$_{50}$ values were 4.02 11M and 2.37 $\mu$M, respec-tively. Silymarin, an antihepatotoxic agent used as a positive control exhibited the EC$_{50}$ value of 2.00 $\mu$M. These results demonstrated that both alaternin and emodin had the simultaneous antioxidant and hepatoprotective activities.ies.

• Journal of the Korean Magnetics Society
• /
• v.10 no.3
• /
• pp.118-122
• /
• 2000

MR characteristics of $Al_2$ $O_3$ based magnetic tunneling juction with various $Al_2$ $O_3$ thicknesses were investigated. Spin-dependent tunneling junctions, in which the tunneling barrier $Al_2$ $O_3$ is formed by depositing a 1-3 nm thick Al layer, followed by thermal oxidation at room temperature in an $O_2$atmosphere, were fabricated on 4$^{\circ}$tilt(111)Si substrate in 3-gun magnetron sputtering system. The top and bottom ferromagnetic electrodes were Ni$_{80}$Fe$_{20}$ and Co. A maximum Tunneling MR ratio of 14% was obtained in the junction of which insulating barrier thickness was 2 nm. By increasing the tunneling voltage across the junction, maximum MR ratio reduced and finally showed no MR characteristics.s.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.192-192
• /
• 2009

Magnetic and magnetotransport properties of (1-x) $La_{0.7}Sr_{0.3}MnO_3-xRE_2O_3$ (RE=La, Nd) (x = 0.025, 0.05, 0.075, 0.1, 0.2, 0.3) composite polycrystalline samples were systematically studied. Samples were prepared using conventional solid-state reaction. LSMO and $RE_2O_3$ react at high temperature and become chemically compatible. The ferromagnetic-paramagnetic transition temperatures ($T_c$) of the LSMO-$Nd_2O_3$ composite samples were decreased 313K~349K with increasing x, while the $T_c$ values of the LSMO-$La_2O_3$ composite samples were almost unaltered in the range of 355K~358K, representing that the ferromagnetism of LSMO might be more seriously degraded by Nd substitution on the ($La_{0.7}Sr_{0.3}$) site. However, LSMO-$RE_2O_3$ composite samples exhibit greatly enhanced low field magnetoresistance (LFMR) and dMR/dH value without an appreciable increase in its resistivity. Remarkably improved LFMR properties are attributed to LSMO grain boundaries acting as effective spin-dependent scattering centers. The relationship among the $RE_2O_3$ addition, microstructure, magnetic and magnetotransport properties will be discussed in this paper.

• Korean Journal of Crystallography
• /
• v.11 no.4
• /
• pp.212-223
• /
• 2000

A stochiometric mix of CuInTe₂ polycrystal was prepared in a honizonatal furnace. To obtain the single crystal thin films, CuInTe₂ mixed crystal was deposited on throughly etched GaAs(100) by the HWE system. The source and substrate temperatures were 610℃ and 450℃ respectively, and the thickness of the deposited single crystal thin film was 2.4㎛. CuInTe₂ single crystal thin film was proved to be the optimal growth condition when the excition emission spectrum was the strongest at 1085.3 nm(1.1424 eV) of photoluminescence spectrum at 10 K, and also FWHM of Double Crystal X-ray Rocking Curve (DCRC) was the smallest, 129 arcsec. The Hall effect on this sample was measured by the method of Van der Pauw, and the carrier density and mobility dependent on temperature were 9.57x10/sup 22/ electron/㎥, 1.31x10/sup -2/㎡/V·s at 293 K, respectively. The ΔCr(Crystal field splitting) and the ΔSo (spin orbit coupling splitting( measured at f10K from the photocurrent peaks in the short wavelength of the CuInTe₂ single crystal thin film were about 0.1200 eV, 0.2833 eV respectively. From the PL spectra of CuInTe₂ single crystal thin film at 10 K, the free exciton (E/sub x/) was determined to be 1064.5 nm(1.1647 eV) and the donor-bound exciton(D/sup 0/, X) and acceptor-bound exciton (A/sup 0/, X) were determined to be 1085.3 nm(1.1424 eV) and 1096.8 nm(1.1304 eV0 respectively. And also, the donor-acciptor pair (DAP)P/sub 0/, DAP-replica P₁, DAP-replica P₂ and self-activated (SA) were determined to be 1131 nm (1.0962 eV), 1164 nm(1.0651 eV), 1191.1 nm(1.0340 eV) and 1618.1 nm (0.7662 eV), respectively.

• ALGAE
• /
• v.20 no.1
• /
• pp.69-75
• /
• 2005

Hizikia fusiformis is well known edible brown seaweed both in Korea and Japan. It has been intensively studied due to its pronounced health benefits. In this study, the radical scavenging (antioxidative) activities of its hydrophilic phlorotannin constituents were studied. An aqueous extract/original extract (OE) of H. fusiformis was initially prepared with heat, enzymes and pH control treatments. Then the original extract was further fractionated (with methylene chloride and methanol) and crude hydrophilic phlorotannin extract (CHPE) was prepared. The radical scavenging activities of both OE and CHPE were determined by using electron spin resonance (ESR) spectrophotometric assays such as 1,1-diphenyl-2-picrylhydrazyl (DPPH), hydroxyl and alkyl radical assays. The CHPE reported significantly (p < 0.05) higher total phenolic (phlorotannins) content (1.23 mg ${\cdot}ml^{-1}$) than that of the OE (0.21 mg ${\cdot}ml^{-1}$). Both OE and CHPE have reported good radical scavenging activities and those activities were dose-dependent. The CHPE have demonstrated significantly higher radical scavenging activities than that of the OE. In comparison, the DPPH radical (6 $\times$ 10$^{-5}$ M) scavenging activities of all the CHPE concentrations (0.25, 0.5 and 1 mg ${\cdot}ml^{-1}$) tested were significantly higher (37.3, 78.2 and 91.6%, respectively) than that of the OE counterparts (11.4, 34.6 and 61.7%, respectively). Alkyl radical scavenging percentages of CHPE at 0.0625, 0.125, 0.25 and 0.5 mg${\cdot}ml^{-1}$ were significantly higher (34.3, 69.2, 80.4 and 88.7%, respectively) than that of the OE (16.6, 41.4, 62.3 and 77.4%, respectively). The percentages of hydroxyl radical scavenging activities of CHPE at the concentrations of 0.25, 0.5 and 1 mg ${\cdot}ml^{-1}$ were 32.5, 59.4 and 84.2 % respectively. Moreover, the hydroxyl radical scavenging activity of OE was quite lower than that of the CHPE. Therefore, these results suggest that the hydrophilic phlorotannins of H. fusiformis are potential radical scavengers thus, a great source of antioxidative nutraceuticles.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2505-2511
• /
• 2014

Indium oxide nanocrystals ($In_2O_3$ NCs) with sizes of 5.5 nm-10 nm were synthesized by hot injection of the mixture precursors, indium acetate and oleic acid, into alcohol solution (1-octadecanol and 1-octadecence mixture). Field emission transmission electron microscopy (FE-TEM), High resolution X-Ray diffraction (X-ray), Nuclear magnetic resonance (NMR), and Fourier transform infrared spectroscopy (FT-IR) were employed to investigate the size, surface molecular structure, and crystallinity of the synthesized $In_2O_3$ NCs. When covered by oleic acid as a capping group, the $In_2O_3$ NCs had a high crystallinity with a cubic structure, demonstrating a narrow size distribution. A high mobility of $2.51cm^2/V{\cdot}s$ and an on/off current ratio of about $1.0{\times}10^3$ were observed with an $In_2O_3$ NCs thin film transistor (TFT) device, where the channel layer of $In_2O_3$ NCs thin films were formed by a solution process of spin coating, cured at a relatively low temperature, $350^{\circ}C$. A size-dependent, non-monotonic trend on electron mobility was distinctly observed: the electron mobility increased from $0.43cm^2/V{\cdot}s$ for NCs with a 5.5 nm diameter to $2.51cm^2/V{\cdot}s$ for NCs with a diameter of 7.1 nm, and then decreased for NCs larger than 7.1 nm. This phenomenon is clearly explained by the combination of a smaller number of hops, a decrease in charging energy, and a decrease in electronic coupling with the increasing NC size, where the crossover diameter is estimated to be 7.1 nm. The decrease in electronic coupling proved to be the decisive factor giving rise to the decrease in the mobility associated with increasing size in the larger NCs above the crossover diameter.